ABSTRACTIn support of a recent surge in research to develop an accident tolerant reactor, accident tolerant fuels and cladding candidates are being investigated. Relative motion between the fuel rods and fuel assembly spacer grids can lead to excessive fuel rod wear and, in some cases, to fuel rod failure. Based on industry data, grid-to-rod-fretting (GTRF) has been the number one cause of fuel failures within the U.S. pressurized water reactor (PWR) fleet, accounting for more than 70% of all PWR leaking fuel assemblies. APMT, an Fe-Cr-Al steel alloy, is being examined for the I2S-LWR project as a possible alternative to conventional fuel cladding in a nuclear reactor due to its favorable performance under LOCA conditions. Tests were performed to examine the reliability of the cladding candidate under simulated fretting conditions of a pressurized water reactor (PWR). The contact is simulated with a rectangular and a cylindrical specimen over a line contact area. A combination of SEM analysis and wear & work rate calculations are performed on the samples to determine their performance and wear under fretting. While APMT can perform favorably in loss of coolant accident scenarios, it also needs to perform well when compared to Zircaloy-4 with respect to fretting wear.