A novel model-free robust saturated reinforcement learning-based controller for quadrotors guaranteeing prescribed transient and steady state performance

2021 ◽  
Vol 119 ◽  
pp. 107128
Author(s):  
Omid Elhaki ◽  
Khoshnam Shojaei
2017 ◽  
Vol 19 (9) ◽  
pp. 952-962 ◽  
Author(s):  
Saeed Shayestehmanesh ◽  
James C Peyton Jones ◽  
Jesse Frey

Most knock controllers respond to knock events which are defined according to some threshold knock intensity. Multi-threshold knock events offer more informative feedback since they encode not just the occurrence of knock events but also some measure of their intensity. While this has the potential for improved control, it is hard to assess the extent to which any benefits are truly realized because (in common with all knock control systems) the results of any single experiment or simulation depends on the random arrival of knock events in that instance. In this article, methods are developed instead to compute the statistical properties of the closed-loop response of a general multi-threshold knock controller, thereby providing a much more complete and rigorous characterization of its performance than has previously been possible. The method is applied to single- and dual-threshold knock controllers and used to provide a rigorous comparison of the transient and steady-state performance of these different control laws. The method can also be used as a calibration aid to assess the effects of different controller gains in reliable, repeatable fashion.


Author(s):  
W Q Yang

The new electrostatic suspension system (ESS) presented here is applicable to electrostatically suspended gyroscopes (ESG). The electrical disturbing torque (EDT) acting on the gyro rotor is reduced to much lower levels than possible with the conventional methods, thereby increasing the attainable accuracy of the instrument. This is achieved by eliminating the conventional pre-load voltage and instead applying only control voltages via an analogue non-linear pre-compensator to achieve linear position control system operation despite the square law relating the suspension force to the applied voltage. The transient and steady state performance of the complete system, with changes in position reference and external disturbing forces, are examined with the aid of computer simulations.


Sign in / Sign up

Export Citation Format

Share Document