Enzymatic pretreatment for cellulose nanofibrils isolation from bagasse pulp: Transition of cellulose crystal structure

Cellulose nanofibrils (CNFs) have potential applications in the development of innovative materials and enhancement of conventional materials properties. This paper focused on the mixed cellulase hydrolysis with major activity of exoglucanase and endoglucanase on the cellulose length shearing. By the cooperation of two-step production route, including (1) enzymatic pretreatment using cellulase fromTrichoderma virideand (2) mechanical grinding twice, a shorter cellulose nanofiber was fabricated. The influence of enzymatic charge and hydrolysis time on cellulose fibers was analyzed by using scanning electron microscopy (SEM), Fourier Transform Infrared Spectrometer (FTIR), and X-ray diffractometer (XRD). SEM images revealed that the surface morphology change, effective diameter sharpening, and length shearing of cellulose fibers are as a result of cellulase hydrolysis. The XRD suggested that the cellulase acted on the amorphous regions more strongly than the crystalline domains during layer-by-layer hydrolysis. The enzymatic charge and hydrolysis time significantly affected the yields and hydrolysis products concentration. The enzymatic pretreatment assisted mechanical grinding could improve the uniformity of CNF and helped to obtain CNF with exact length according to the requirement for special applications.

Download Full-text

Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils

Molecules ◽

10.3390/molecules25143306 ◽

2020 ◽

Vol 25 (14) ◽

pp. 3306

Author(s):

Qianqian Wang ◽

Chencheng Ji ◽

Jianzhong Sun ◽

Qianqian Zhu ◽

Jun Liu

Keyword(s):

Polylactic Acid ◽

Cellulose Nanofibrils ◽

Nitrogen Atmosphere ◽

Scanning Calorimetry ◽

Enzymatic Pretreatment ◽

Thermogravimetric Analyzer ◽

Degradation Temperature ◽

Biocomposite Films ◽

Renewable Feedstock ◽

Vis Spectroscopy

Polylactic acid (PLA) is one of the most promising biodegradable and recyclable thermoplastic biopolymer derived from renewable feedstock. Nanocellulose reinforced PLA biocomposites have received increasing attention in academic and industrial communities. In the present study, cellulose nanofibrils (CNFs) was liberated by combined enzymatic pretreatment and high-pressure homogenization, and then subsequently incorporated into the PLA matrix to synthesize PLA/CNF biocomposite films via solution casting and melt compression. The prepared PLA/CNF biocomposite films were characterized in terms of transparency (UV-Vis spectroscopy), chemical structure (attenuated total reflectance-Fourier transform infrared, ATR-FTIR; X-ray powder diffraction, XRD), thermal (thermogravimetric analyzer, TGA; differential scanning calorimetry, DSC), and tensile properties. With 1.0–5.0 wt % additions of CNF to the PLA matrix, noticeable improvements in thermal and physical properties were observed for the resulting PLA/CNF biocomposites. The 2.5 wt % addition of CNF increased the tensile strength by 8.8%. The Tonset (initial degradation temperature) and Tmax (maximum degradation temperature) after adding 5.0 wt % CNF was increased by 20 °C, and 10 °C, respectively in the nitrogen atmosphere. These improvements were attributed to the good dispersibility and improved interfacial interaction of CNF in the PLA matrix.

Download Full-text