Improving the sinterability of ZrC–SiC composite powders by Mg addition

2021 ◽  
Author(s):  
Lei Zheng ◽  
Mingyu Zhang ◽  
Kejian He ◽  
Cunqian Fang ◽  
Chen Zeng ◽  
...  
Keyword(s):  
Composite Powders ◽  
Mg Addition

The Effect of Mg Addition and Manufacturing Conditions on the Interfacial Reactions between Al and CNT in Al-CNT Pellets

2013 ◽  
Vol 51 (5) ◽  
pp. 385-391 ◽  
Author(s):  
Gue-Serb Cho ◽  
Jung-Kyu Lim ◽  
Sonn-Yool Choi ◽  
Kyong-Hwan Choe ◽  
Sang-Sub Kim
Keyword(s):  
Interfacial Reactions ◽  
Mg Addition

Synthesis and Microwave Absorbing Properties of PyC/BN Composite Powders

2013 ◽  
Vol 28 (5) ◽  
pp. 479-484 ◽  
Author(s):  
Wei ZHOU ◽  
Peng XIAO ◽  
Yang LI ◽  
Heng LUO ◽  
Liang ZHOU
Keyword(s):  
Composite Powders ◽  
Microwave Absorbing Properties ◽  
Microwave Absorbing

Impact of the SiC addition on the morphological, structural and mechanical properties of Cu-SiC composite powders prepared by high energy milling

2021 ◽  
Author(s):  
Nailton T. Câmara ◽  
Rafael A. Raimundo ◽  
Cleber S. Lourenço ◽  
Luís M.F. Morais ◽  
David D.S. Silva ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Energy ◽  
Composite Powders ◽  
High Energy Milling

scholarly journals Characterization of Al2O3 Samples and NiAl–Al2O3 Composite Consolidated by Pulse Plasma Sintering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3398
Author(s):  
Katarzyna Konopka ◽  
Marek Krasnowski ◽  
Justyna Zygmuntowicz ◽  
Konrad Cymerman ◽  
Marcin Wachowski ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Mechanical Alloying ◽  
Ceramic Composites ◽  
Pulse Plasma ◽  
High Plasticity ◽  
Composite Powders ◽  
Microstructural Investigation ◽  
Al2o3 Powder ◽  
Plasma Sintering ◽  
Pulse Plasma Sintering

The paper describes an investigation of Al2O3 samples and NiAl–Al2O3 composites consolidated by pulse plasma sintering (PPS). In the experiment, several methods were used to determine the properties and microstructure of the raw Al2O3 powder, NiAl–Al2O3 powder after mechanical alloying, and samples obtained via the PPS. The microstructural investigation of the alumina and composite properties involves scanning electron microscopy (SEM) analysis and X-ray diffraction (XRD). The relative densities were investigated with helium pycnometer and Archimedes method measurements. Microhardness analysis with fracture toughness (KIC) measures was applied to estimate the mechanical properties of the investigated materials. Using the PPS technique allows the production of bulk Al2O3 samples and intermetallic ceramic composites from the NiAl–Al2O3 system. To produce by PPS method the NiAl–Al2O3 bulk materials initially, the composite powder NiAl–Al2O3 was obtained by mechanical alloying. As initial powders, Ni, Al, and Al2O3 were used. After the PPS process, the final composite materials consist of two phases: Al2O3 located within the NiAl matrix. The intermetallic ceramic composites have relative densities: for composites with 10 wt.% Al2O3 97.9% and samples containing 20 wt.% Al2O3 close to 100%. The hardness of both composites is equal to 5.8 GPa. Moreover, after PPS consolidation, NiAl–Al2O3 composites were characterized by high plasticity. The presented results are promising for the subsequent study of consolidation composite NiAl–Al2O3 powder with various initial contributions of ceramics (Al2O3) and a mixture of intermetallic–ceramic composite powders with the addition of ceramics to fabricate composites with complex microstructures and properties. In composites with complex microstructures that belong to the new class of composites, in particular, the synergistic effect of various mechanisms of improving the fracture toughness will be operated.

scholarly journals Characteristics of hydroxyapatite-reduced graphene oxide composite powders synthesized via hydrothermal method in the absence and presence of diethylene glycol

Open Ceramics ◽  
2021 ◽  
Vol 5 ◽  
pp. 100067
Author(s):  
Hassan Nosrati ◽  
Rasoul Sarraf-Mamoory ◽  
Maria Canillas Perez ◽  
Dang Quang Svend Le ◽  
Reza Zolfaghari Emameh ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Hydrothermal Method ◽  
Reduced Graphene Oxide ◽  
Diethylene Glycol ◽  
Composite Powders ◽  
Oxide Composite ◽  
Reduced Graphene

Effect of synthesis parameters on the crystallite size of WC-Ni composite powders obtained by gas-solid reaction

2021 ◽  
Author(s):  
Maria J.S. Lima ◽  
Fernando E.S. Silva ◽  
Maria V.M. Souto ◽  
Roberta A.C. Menezes ◽  
Marcello Filgueira ◽  
...  
Keyword(s):  
Crystallite Size ◽  
Solid Reaction ◽  
Composite Powders ◽  
Synthesis Parameters ◽  
Gas Solid Reaction

scholarly journals Performance Characterization of Composite Powders for 3D Printing

2021 ◽  
Vol 714 (3) ◽  
pp. 032070
Author(s):  
Xiangjun Bi ◽  
Hongjie Zhao ◽  
Yuanxun Gong ◽  
Xinghong Zhou
Keyword(s):  
3D Printing ◽  
Composite Powders ◽  
Performance Characterization

scholarly journals Influence of CFRC Insulating Plates on Spark Plasma Sintering Process

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 393
Author(s):  
Alexander M. Laptev ◽  
Jürgen Hennicke ◽  
Robert Ihl
Keyword(s):  
Temperature Distribution ◽  
Spark Plasma Sintering ◽  
Energy Demand ◽  
Composite Powders ◽  
Fem Method ◽  
Plasma Sintering ◽  
Axial Temperature ◽  
Spark Plasma ◽  
Power And Energy ◽  
The Impact

Spark Plasma Sintering (SPS) is a technology used for fast consolidation of metallic, ceramic, and composite powders. The upscaling of this technology requires a reduction in energy consumption and homogenization of temperature in compacts. The application of Carbon Fiber-Reinforced Carbon (CFRC) insulating plates between the sintering setup and the electrodes is frequently considered as a measure to attain these goals. However, the efficiency of such a practice remains largely unexplored so far. In the present paper, the impact of CFRC plates on required power, total sintering energy, and temperature distribution was investigated by experiments and by Finite Element Modeling (FEM). The study was performed at a temperature of 1000 °C with a graphite dummy mimicking an SPS setup. A rather moderate influence of CFRC plates on power and energy demand was found. Furthermore, the cooling stage becomes considerably longer. However, the application of CFRC plates leads to a significant reduction in the axial temperature gradient. The comparative analysis of experimental and modeling results showed the good capability of the FEM method for prediction of temperature distribution and required electric current. However, a discrepancy between measured and calculated voltage and power was found. This issue must be further investigated, considering the influence of AC harmonics in the DC field.

Sign in / Sign up

Export Citation Format

Share Document