The role of sulphide and carbonate minerals in the concentration of chalcophile elements in the bituminous coal seams of a paralic series (Upper Carboniferous) in the Upper Silesian Coal Basin (USCB), Poland

Geochemistry ◽  
2006 ◽  
Vol 66 (3) ◽  
pp. 227-247 ◽  
Author(s):  
Henryk R. Parzentny ◽  
Lucyna Lewińska-Preis
Clay Minerals ◽  
1992 ◽  
Vol 27 (3) ◽  
pp. 269-282 ◽  
Author(s):  
Z. Weiss ◽  
A. Baronnet ◽  
M. Chmielova

AbstractIn the Czechoslovak part of the Upper Silesian Coal Basin (Ostrava-Karvina Coal Basin), only part of the Upper Carboniferous (Namurian A, B, C and Westphalian A) is well developed, and tonsteins, which are clayey rocks or claystones, occur as thin, clayey interlayers in the coal seams. Two types of primary volcanic mineral assemblages were identified in four tonstein samples from different coal seams; the first type is characterized by the presence of biotite and sanidine, and the second by the presence of biotite, bytownite and Ca-amphibole. All tonsteins studied contained kaolinite minerals, volcanic quartz grains, crystals of zircon and apatite. Separated biotite flakes with an admixture of kaolinite layers were identified as 1M polytype. The flakes without kaolinite minerals were identified as epitactic overgrowth of 1M and complex polytypes, and twinned crystals of 2M1 polytype. Kaolinization of biotite flakes was observed in all tonstein samples studied. Kaolinite single layers (7 Å) as well as two-layer polytype of kaolinite minerals (14 Å) sandwiched between biotite layers (10 Å) were identified by HRTEM imaging.


2017 ◽  
Vol 33 (3) ◽  
pp. 109-120
Author(s):  
Jacek Misiak

Abstract Bituminous coal samples were collected from mine excavations of six mines in the Upper Silesian Coal Basin. I n the mentioned mining excavations, the stratighaphic sections, in the form of spot samples, were measured. Based on the macroscopic and microscopic observation, an attempt was made to determine the different lithotypes of coal. Vitrain coal is made of tellinite and collotelinite; the thickness of the layers varies from very thin, thin, medium, to coarse. Durain, which is dominated by macerals from the vitrinite group, is characterized by a darker, almost black color, genetically linked to heavily flooded peat areas, where the deposited phytogenic material is subjected to humification and gelification processes. A brighter durain, with a dark gray color, is dominated by macerals from the inertinite group that originated in the shallower areas of peat bogs where the water level was periodically lowered, which has led to the oxidation of the material deposited in the peat bog. Fusain is another coal component or constituent; it is produced as a result of peat bog fires. It is a charred (not burned) material deposited in the form of layers, lenses, usually with a thickness of up to several millimeters (or, less commonly, several centimeters), or dispersed in the form of shreds in the durain. The petrographic composition is dominated by fusinite and inertodetrinite. Fusain occurs in two varieties: soft (empty cellular spaces) and hard, usually mineralized with carbonates (siderite) or sulphides (pyrite, marcasite). The structure of bituminous coal is, due to its origin, most often laminated and consists of alternating dull and bright layers. Occasionally, such layering can be observed in bright coal, which is the result of layering of large parts of gelified plant materials. When it comes to larger sections of dull coal (without bright coal) in the profile, a solid structure can be observed. Some of the sections in the coal seam profiles show a distorted structure; warped, sometimes shredded layers of vitrain in durain, often containing lenses or shreds of fusain, can be observed.


2021 ◽  
Vol 80 (22) ◽  
Author(s):  
Marcin Dreger ◽  
Sławomir Kędzior

AbstractThe paper presents the variability of hard coal output, methane content and methane emissions into coal workings and into the atmosphere from the two most methane-gassy coal mines in Poland. The Budryk mine is one of the youngest mines in Poland, but it is the most methane-gassy as well. In 2016, the total CH4 emissions exceed 140 million of m3. This large increase in methane emissions to mine workings is primarily related to the increase in the depth of coal extraction (up to 1290 m) and, consequently, the rapid increase in the methane content in coal seams (up to 10–12 m3/Mg coaldaf). On the other hand, in the Pniówek mine, methane emission was the highest at the beginning of the study period (1986–1991). During the following years, emission decreased to the values of less than 140 million of m3, which were still one of the largest amounts of emitted methane in the entire Upper Silesian Coal Basin. The coexistence of natural factors, such as the geological structure and gas distribution, as well as mining-related factors, i.e. the depth of mining, the intensity of coal extraction determines the temporal variability of methane emissions in the studied mines.


Resources ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 127
Author(s):  
Justyna Auguścik-Górajek ◽  
Marek Nieć

The mercury content in bituminous coal in Poland varies depending on the coal basin. The highest of its concentrations are recorded in the Lower Silesian Coal Basin where this may be the result of the volcanic activity reported there. A much lower average of Hg content was recorded in Lublin and the Upper Silesian Coal Basins (LCB and USCB), although it was higher in the former. A higher mercury concentration in the LCB is probably related to the zone of supposed deep disturbances, named the Karpinsky lineament. Most published works present the data on the mercury content in the bulk of mined coal. The preliminary assessment of mercury content in coal seams indicates that it varies considerably between and within them. It is bound to the presence of arsenic-bearing iron sulfides. Concentration of mercury in small zones of limited extent suggests it was introduced by migrating fluids. The knowledge of mercury content distribution in coal seams would improve the prediction of its content in the mined coal and allow better management of produced coal quality with the aim of reducing mercury emission to the atmosphere as a result of coal combustion.


2009 ◽  
Vol 77 (1-2) ◽  
pp. 175-187 ◽  
Author(s):  
Frank van Bergen ◽  
Pawel Krzystolik ◽  
Niels van Wageningen ◽  
Henk Pagnier ◽  
Bartlomiej Jura ◽  
...  

2017 ◽  
Vol 62 (4) ◽  
pp. 843-856 ◽  
Author(s):  
Krzysztof Wierzchowski ◽  
Jarosław Chećko ◽  
Ireneusz Pyka

Abstract The process of identifying and documenting the quality parameters of coal, as well as the conditions of coal deposition in the seam, is multi-stage and extremely expensive. The taking and analyzing of seam samples is the method of assessment of the quality and quantity parameters of coals in deep mines. Depending on the method of sampling, it offers quite precise assessment of the quality parameters of potential commercial coals. The main kind of seam samples under consideration are so-called “documentary seam samples”, which exclude dirt bands and other seam contaminants. Mercury content in coal matter from the currently accessible and exploited coal seams of the Upper Silesian Coal Basin (USCB) was assessed. It was noted that the mercury content in coal seams decreases with the age of the seam and, to a lesser extent, seam deposition depth. Maps of the variation of mercury content in selected lithostratigraphic units (layers) of the Upper Silesian Coal Basin have been created.


Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2153 ◽  
Author(s):  
Jarosław Chećko ◽  
Tomasz Urych ◽  
Małgorzata Magdziarczyk ◽  
Adam Smoliński

The paper presents the assessment of the resources of methane considered as the main mineral in the most prospective selected areas of the Upper Silesian Coal Basin, Poland in the region of undeveloped deposits. The methane resources were estimated by means of a volumetric method at three depth levels, 1000, 1250, and 1500 m. A part of the Studzienice deposit comprising three coal seams, 333, 336, and 337, located in a methane zone was chosen for the numerical modeling of simulated methane production. The presented static 3D model has been developed using Petrel Schlumberger software. The total resources of methane in the area amount to approximately 446.5 million of Nm3. Numerical simulations of methane production from the selected coal seams with hydraulic fracturing were conducted by means of Schlumberger ECLIPSE reservoir simulator. Based on the simulations, it was concluded that, in the first six months of the simulations, water is produced from the seams, which is connected with the decrease in the rock mass pressure. The process prompts methane desorption from the coal matrix, which in turn results in a total methane production of 76.2 million of Nm3 within the five-year period of the simulations, which constitutes about 17% of total methane resources (GIP). The paper also presents a detailed analysis of Polish legislation concerning the activities aimed at prospecting, exploring, and extracting the deposits of hydrocarbons.


2020 ◽  
Vol 231 ◽  
pp. 103609
Author(s):  
Anna Pytlak ◽  
Anna Szafranek-Nakonieczna ◽  
Agnieszka Sujak ◽  
Jarosław Grządziel ◽  
Cezary Polakowski ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document