Mass balance of pharmaceutical and personal care products in a pilot-scale single-sludge system: Influence of T, SRT and recirculation ratio

The pollution of water sources by endocrine disrupting compounds (EDCs) and pharmaceutical and personal care products (PPCPs) is a growing concern, as conventional municipal wastewater treatment systems are not capable of completely removing these contaminants. A continuous stir tank reactor incorporating a modified polyacrylonitrile (PAN) catalyst and dosed with hydrogen peroxide in a heterogeneous Fenton’s process was used at pilot scale to remove these compounds from wastewater that has undergone previous treatment via a conventional wastewater treatment system. The treatment system was effective at ambient temperature and at the natural pH of the wastewater. High levels of both natural and synthetic hormones (EDCs) and PPCPs were found in the effluent after biological treatment of the wastewater. The treatment system incorporating the modified PAN catalyst/H2O2decomposed >90% of the EDCs and >40% of PPCPs using 200 mgL−1H2O2, 3 hr residence time. The estrogenic potency EE2-EQ was removed by 82.77%, 91.36%, and 96.13% from three different wastewater treatment plants. BOD was completely removed (below detection limits); 30%–40% mineralisation was achieved and turbidity reduced by more than 68%. There was a <4% loss in iron content on the catalyst over the study period, suggesting negligible leaching of the catalyst.

Download Full-text

Effect of O3 Dose on the O3/UV Treatment Process for the Removal of Pharmaceuticals and Personal Care Products in Secondary Effluent

ChemEngineering ◽

10.3390/chemengineering3020053 ◽

2019 ◽

Vol 3 (2) ◽

pp. 53 ◽

Cited By ~ 2

Author(s):

N. Evelin Paucar ◽

IIho Kim ◽

Hiroaki Tanaka ◽

Chikashi Sato

Keyword(s):

Municipal Wastewater ◽

Treatment Process ◽

Limit Of Detection ◽

Personal Care Products ◽

Treatment Plant ◽

Pilot Scale ◽

Secondary Effluent ◽

Municipal Wastewater Treatment ◽

Personal Care ◽

Uv Treatment

A municipal wastewater treatment plant (WWTP) is a melting pot of numerous pharmaceuticals and personal care products (PPCPs) together with many other substances. The removal of PPCPs using advanced oxidation processes within a WWTP is one way to reduce the amount of PPCPs that potentially enter an aquatic environment. The aim of this study was to examine the effectiveness of the ozone (O3)/UV treatment process, especially, the effects of O3 dose and reaction time, on the removal of PPCPs in the secondary effluent of a WWTP. Experiments were conducted using a pilot-scale treatment process that consisted of two flow-through reactors connected in series. Each reactor was equipped with three 65 W lamps (UV65W). The experimental variables were ozone dosage (1, 2, 3, 4, and 6 mg L−1) and hydraulic retention time (HRT; 5 and 10 min). On the basis of the PPCP concentrations after O3/UV65W treatment and their limit of detection (LOD), 38 PPCPs detected in the secondary effluent were classified into 5 groups ranging from the category of “sensitive” to O3/UV65W or “unstable” in the O3/UV65W process to the category of “insensitive” to O3/UV65W or “very stable” in the O3/UV65W process.

Download Full-text