A novel UV-LED hydrogen peroxide electrochemical photoreactor for point-of-use organic contaminant degradation

Chemosphere ◽  
2021 ◽  
pp. 133353
Author(s):  
Seyyed Arman Hejazi ◽  
Fariborz Taghipour
2014 ◽  
Vol 48 (3) ◽  
pp. 1902-1910 ◽  
Author(s):  
Guodong Fang ◽  
Juan Gao ◽  
Cun Liu ◽  
Dionysios D. Dionysiou ◽  
Yu Wang ◽  
...  

TAPPI Journal ◽  
2018 ◽  
Vol 17 (11) ◽  
pp. 601-607
Author(s):  
Alan Rudie ◽  
Peter Hart

The use of 50% concentration and 10% concentration hydrogen peroxide were evaluated for chemical and mechanical pulp bleach plants at storage and at point of use. Several dangerous occurrences have been documented when the supply of 50% peroxide going into the pulping process was not stopped during a process failure. Startup conditions and leaking block valves during maintenance outages have also contributed to explosions. Although hazardous events have occurred, 50% peroxide can be stored safely with proper precautions and engineering controls. For point of use in a chemical bleach plant, it is recommended to dilute the peroxide to 10% prior to application, because risk does not outweigh the benefit. For point of use in a mechanical bleach plant, it is recommended to use 50% peroxide going into a bleach liquor mixing system that includes the other chemicals used to maintain the brightening reaction rate. When 50% peroxide is used, it is critical that proper engineering controls are used to mitigate any risks.


Author(s):  
Marika Viisimaa ◽  
Anna Goi

This study compared treatment methods that utilised a liquid carrier of hydrogen peroxide and a solid carrier, percarbonate, for p-dichlorobenzene, p-chloro-m-cresol and p-chlorothymol degradation in the soil. The targeted chlorinated aromatic contaminants in the soil degraded to a certain level when treated with the liquid hydrogen peroxide, but the removal efficacy was not dependent on the dosage. In contrast, an increase in the percarbonate dosage enhanced the contaminant removal. Supplementary ferrous iron was more effective for the treatment that employed the liquid carrier of hydrogen peroxide than the treatment employing the solid carrier. Although acidic pH conditions (initial pH of 2.5) favoured contaminant degradation using liquid hydrogen peroxide, the treatment involving percarbonate resulted in more effective contaminant removal without any soil pH preadjustment. Therefore, the solid carrier of hydrogen peroxide, percarbonate, was concluded to be an effective alternative to the liquid carrier, resulting in greater contaminant removal at natural soil pH values.


2020 ◽  
Vol 6 (4) ◽  
pp. 1069-1082
Author(s):  
Muhammad B. Asif ◽  
Jason P. van de Merwe ◽  
Frederic D. L. Leusch ◽  
Biplob K. Pramanik ◽  
William E. Price ◽  
...  

This study presents the performance of an integrated laccase and persulfate oxidation process for trace organic contaminant degradation and elucidates the performance governing factors.


2010 ◽  
Vol 77 (3) ◽  
pp. 991-999 ◽  
Author(s):  
Jianping Xie ◽  
Zhili He ◽  
Xinxing Liu ◽  
Xueduan Liu ◽  
Joy D. Van Nostrand ◽  
...  

ABSTRACTAcid mine drainage (AMD) is an extreme environment, usually with low pH and high concentrations of metals. Although the phylogenetic diversity of AMD microbial communities has been examined extensively, little is known about their functional gene diversity and metabolic potential. In this study, a comprehensive functional gene array (GeoChip 2.0) was used to analyze the functional diversity, composition, structure, and metabolic potential of AMD microbial communities from three copper mines in China. GeoChip data indicated that these microbial communities were functionally diverse as measured by the number of genes detected, gene overlapping, unique genes, and various diversity indices. Almost all key functional gene categories targeted by GeoChip 2.0 were detected in the AMD microbial communities, including carbon fixation, carbon degradation, methane generation, nitrogen fixation, nitrification, denitrification, ammonification, nitrogen reduction, sulfur metabolism, metal resistance, and organic contaminant degradation, which suggested that the functional gene diversity was higher than was previously thought. Mantel test results indicated that AMD microbial communities are shaped largely by surrounding environmental factors (e.g., S, Mg, and Cu). Functional genes (e.g.,narGandnorB) and several key functional processes (e.g., methane generation, ammonification, denitrification, sulfite reduction, and organic contaminant degradation) were significantly (P< 0.10) correlated with environmental variables. This study presents an overview of functional gene diversity and the structure of AMD microbial communities and also provides insights into our understanding of metabolic potential in AMD ecosystems.


2007 ◽  
Vol 14 (2) ◽  
pp. 113-116 ◽  
Author(s):  
José González-García ◽  
Ludovic Drouin ◽  
Craig E. Banks ◽  
Biljana Šljukić ◽  
Richard G. Compton

2010 ◽  
Vol 55 (18) ◽  
pp. 5091-5099 ◽  
Author(s):  
Aiyong Zhang ◽  
Minghua Zhou ◽  
Liang Liu ◽  
Wei Wang ◽  
Yongli Jiao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document