Understanding the risks and rewards of using 50% vs. 10% strength peroxide in pulp bleach plants

TAPPI Journal ◽  
2018 ◽  
Vol 17 (11) ◽  
pp. 601-607
Author(s):  
Alan Rudie ◽  
Peter Hart

The use of 50% concentration and 10% concentration hydrogen peroxide were evaluated for chemical and mechanical pulp bleach plants at storage and at point of use. Several dangerous occurrences have been documented when the supply of 50% peroxide going into the pulping process was not stopped during a process failure. Startup conditions and leaking block valves during maintenance outages have also contributed to explosions. Although hazardous events have occurred, 50% peroxide can be stored safely with proper precautions and engineering controls. For point of use in a chemical bleach plant, it is recommended to dilute the peroxide to 10% prior to application, because risk does not outweigh the benefit. For point of use in a mechanical bleach plant, it is recommended to use 50% peroxide going into a bleach liquor mixing system that includes the other chemicals used to maintain the brightening reaction rate. When 50% peroxide is used, it is critical that proper engineering controls are used to mitigate any risks.

2020 ◽  
Vol 17 (2) ◽  
pp. 172
Author(s):  
HARMAN AGUSAPUTRA ◽  
MARIA SUGENG ◽  
AYLY SOEKAMTO ◽  
ATIK WULANDARI

<p><strong>Abstract</strong></p><p><strong>Background:</strong> Hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>) as antiseptic has been used frequently to clean woundsin in hospitals and clinics. Hydrogen peroxide has the effectof strong oxidative that can kill pathogens. It can clean up debris and necrotic tissuesin wounds. Hydrogen peroxidealso has hemostatic effect that can help to stop bleeding. Besides antiseptic effects, hydrogen peroxide i s suspected of having negative effect in wound healing. Hydrogen peroxide presumably could cause delayed wound healing by exudate formation and delayed epithelial growth.</p><p><strong>Method</strong>: This study was conducted in the laboratory using 48 white mice that were divided into 2 groups. All the mice were purposely wounded. Afterwards in one group the wounds were clean up using hydrogen peroxide, while in the other group without hydrogen peroxide as control. The wounds of both groups were observed on day 1, day 3 and day 7. On day 1 and day 3, both groups did not show significant difference.</p><p><strong>R</strong><strong>esult</strong> : on day 7 showed that the wound healing in hydrogen peroxide group were delayed. Fifty percent of them had the formation of exudate and 62.5% of them showed delayed epithelial growth.</p><p><strong>Conclusion </strong>: This study could show hydrogen peroxide as wound antiseptic has delayed wound healing effect.</p><p><strong>Keyword</strong>: hydrogen peroxide, wound healing</p>


2006 ◽  
Vol 21 (3) ◽  
pp. 359-364 ◽  
Author(s):  
Eva Svensson Rundlöf ◽  
Eric Zhang ◽  
Liming Zhang ◽  
Göran Gellerstedt

2018 ◽  
Vol 69 (8) ◽  
pp. 2081-2088 ◽  
Author(s):  
Alin Alexandru Odor ◽  
Edwin Sever Bechir ◽  
Deborah Violant ◽  
Victoria Badea

Moderate and severe periodontitis represents a challenge in the non-surgical periodontal therapy. Due to the lack of evidence regarding the antimicrobial effectiveness of 940 nm diode laser in periodontal treatment, this study aimed to evaluate the antimicrobial effect of hydrogen peroxide (H2O2) photolysis performed with 940 nm diode laser in the treatment of moderate and severe periodontitis. Twenty-five patients with 100 teeth were selected for this pilot study. The test teeth were randomly assigned to one of the four treatment groups: Group 1: scaling and root planning (SRP) (control group); and the following experimental groups: Group 2: H2O2; Group 3: 940 nm diode laser therapy; Group 4: 940 nm diode laser therapy and H2O2. Clinical examinations, like probing depth (PD), clinical attachment level (CAL) and bleeding on probing (BOP) were performed before and after the treatment. The microbiological evaluation, effectuated before and after the treatment, included nine periodontal bacteria species and investigated by means of real-time PCR assay. The clinical and bacterial differences in the tested groups, was assessed between control group and the other three experimental groups, as well as between the experimental groups. The total bacteria load was reduced for all four studied groups. Group 4 (diode laser + H2O2) showed significant bacterial reduction of the major periodontal bacteria like Pg., Tf., Td., Pi., Pm., Fn (p[0.001) than the other 3 groups (p]0.001). Also the periodontal clinical parameters, like PD, CAL and BOP showed a significant reduction after the photolysis of H2O2 with the 940 nm diode laser (p[0.001). Differences between tested groups showed a significant beneficial results in regard to Group 4.It is suggested that the photoactivation of H2O2 with the 940 nm diode laser can be used successfully in adjunctive to the non-surgical periodontal treatment as a bactericidal tool.


1991 ◽  
Vol 56 (4) ◽  
pp. 923-932
Author(s):  
Jana Stejskalová ◽  
Pavel Stopka ◽  
Zdeněk Pavlíček

The ESR spectra of peroxidase systems of methaemoglobin-ascorbic acid-hydrogen peroxide and methaemoglobin-haptoglobin complex-ascorbic acid-hydrogen peroxide have been measured in the acetate buffer of pH 4.5. For the system with methaemoglobin an asymmetrical signal with g ~ 2 has been observed which is interpreted as the perpendicular region of anisotropic spectrum of superoxide radical. On the other hand, for the system with methaemoglobin-haptoglobin complex the observed signal with g ~ 2 is symmetrical and is interpreted as a signal of delocalized electron. After realization of three repeatedly induced peroxidase processes the ESR signal of the perpendicular part of anisotropic spectrum of superoxide radical is distinctly diminished, whereas the signal of delocalized electron remains practically unchanged. An amino acid analysis of methaemoglobin along with results of the ESR measurements make it possible to derive a hypothesis about the role of haptoglobin in increasing of the peroxidase activity of methaemoglobin.


1990 ◽  
Vol 55 (10) ◽  
pp. 2377-2380
Author(s):  
Hamza A. Hussain

Nitroxide free radicals prepared from diethylamine, piperidine and pyrrolidine by oxidation with hydrogen peroxide were studied by ESR spectroscopy. The changes in the 14N splitting constant (aN) caused by the addition of KBr or tetraethylammonium bromide were measured in dependence on the concentration of the ions. For diethylamine nitroxide and piperidine nitroxide, the results are discussed in terms of two equilibria: the one, involving the anion, is associated with a gain or loss of hydrogen bonds to the nitroxide oxygen atom, the other is associated with the formation of solvent shared units involving the cation, which results in changes in the hydrogen bonding strenght. The large increase in the aN value in the case of pyrrolidine nitroxide is explained in terms of an interaction from one side of the positively charged N atom; the increase in aN in the case of diethylamine and piperidine nitroxides is explained in terms of interactions with both sides of the positively charged N atom.


Author(s):  
João Felipe Besegato ◽  
Gabriela Dos Santos Ribeiro Rocha ◽  
Marlene De Sousa Amorim ◽  
Fabio Martins Salomão ◽  
Daniel Poletto ◽  
...  

Objective: to measure pH values of bleaching agents that are indicated to intracoronal bleaching technique in different time intervals. Methods: Each group (G) received five samples (n=5): G1 – distilled water (AD); G2 – hydrogen peroxide (H2O2) 30%; G3 – sodium perborate (PbS) + AD; G4 – PbS + H2O2 30%; G5 – sodium percarbonate (PcS) + AD; and G6 – PcS + H2O2 30%. pH values were stated using a digital pHmeter, in different time intervals: immediately after handling (T0), 24 hours (T1) and 168 hours after handling (T2). The results were submitted to statistical analysis through Kruskal-Wallis and Mann Whitney tests, in this order, allowing multiple comparisons among the groups. To verify the effect of time in each group, Friedman test was applied. Results: In the evaluation of the effect of time in each group, it was observed that G2 presented acid behavior, while the other groups exhibited values close to neutrality or alkaline. Conclusions: H2O2 30% was the only agent that showed acidic behavior in every evaluation time. Meanwhile, PcS + H2O had the highest pH values.


2011 ◽  
Vol 32 (9) ◽  
pp. 831-836 ◽  
Author(s):  
T. Holmdahl ◽  
P. Lanbeck ◽  
M. Wullt ◽  
M. H. Walder

Objective.New technologies have emerged in recent years for the disinfection of hospital rooms and equipment that may not be disinfected adequately using conventional methods. There are several hydrogen peroxide–based area decontamination technologies on the market, but no head-to-head studies have been performed.Design.We conducted a head-to-head in vitro comparison of a hydrogen peroxide vapor (HPV) system (Bioquell) and an aerosolized hydrogen peroxide (aHP) system (Sterinis).Setting.The tests were conducted in a purpose-built 136-m3test room.Methods.One HPV generator and 2 aHP machines were used, following recommendations of the manufacturers. Three repeated tests were performed for each system. The microbiological efficacy of the 2 systems was tested using 6-log Tyvek-pouchedGeobacillus stearo-thermophilusbiological indicators (BIs). The indicators were placed at 20 locations in the first test and 14 locations in the subsequent 2 tests for each system.Results.All BIs were inactivated for the 3 HPV tests, compared with only 10% in the first aHP test and 79% in the other 2 aHP tests. The peak hydrogen peroxide concentration was 338 ppm for HPV and 160 ppm for aHP. The total cycle time (including aeration) was 3 and 3.5 hours for the 3 HPV tests and the 3 aHP tests, respectively. Monitoring around the perimeter of the enclosure with a handheld sensor during tests of both systems did not identify leakage.Conclusion.One HPV generator was more effective than 2 aHP machines for the inactivation ofG. stearothermophilusBIs, and cycle times were faster for the HPV system.


1982 ◽  
Vol 60 (7) ◽  
pp. 848-852 ◽  
Author(s):  
Yoshiro Ogata ◽  
Kazushige Tanaka

The oxidation of diphenyl sulfide (Ph2S) by hydrogen peroxide in the presence of a catalytic amount of sodium metavanadate (NaVO3) has been studied kinetically by means of iodometry of hydrogen peroxide. The reaction rate is expressed as: v = k[NaVO3]st[Ph2S]2, when the concentration of catalyst is very low and [Ph2S]0/[H2O2]0 > 2, where []st and []0 mean stoichiometric and initial concentration, respectively. The effective oxidant may consist of polymeric as well as monomeric peroxyvanadate in view of the effect of concentration of catalyst on the rate. The main oxidizing species at low concentration of catalyst seems to be diperoxyvanadate VO5−. The rate constant k2 in v = k2[Ph2S]2 tends to decrease with initial concentration of H2O2, which is present in excess of the catalyst. A probable mechanism for the oxidation is discussed.


REAKTOR ◽  
2017 ◽  
Vol 11 (1) ◽  
pp. 8
Author(s):  
F. S. Budi ◽  
Z. Abidin

Indonesia is the second big CPO producer after Malaysia. The CPO production of Indonesia gradually increases and reaches 8.2 million tones. About two third of it is used to meet the domestic will receive little income. Therefore, it must be converted into the other product, which has the high value. The main component of it is glyceride composed of glycerol  and fatty acid. The glyceride can be converted into polyol (polyalcohol) which is the material in manufacturing polyurethane, cosmetic, lubricant etc. the process of converting of CPO into polyol is called  the hydroxylation. This research aim to study the hydroxylation process of CPO into polyol and to optimize the variable which really affect the hydroxyl number of product. Based on the experiment, the optimum condition of hydroxylation of CPO with the hydrogen peroxide (H2O2) and the formic acid (HCOOH) into polyol is got as follows: temperature 50 0C, composition of reactan 40% and time 2 hours. The polyol produced has the hydroxyl number 148.Keywords : CPO, hydroxylation, polyol


Author(s):  
Ashok Kumar Jena ◽  
Jitendra Sharan

Abstract Filtering facepiece respirators (FFRs) are made for one-time use. A massive shortage of FFRs is widespread during pandemic events and has forced many healthcare organizations to decontaminate them and re-use for a limited time. Many decontamination methods have been proposed for the decontamination of FFRs. This review highlights various aspects of decontamination methods available in the literature. Among various methods available, vaporized hydrogen peroxide, ultraviolet irradiation, and dry heat seem to be the most promising decontaminants for FFRs. On the other hand, microwave, bleach, ethylene oxide, alcohol, hydrogen peroxide liquid, sanitizing wipes, and soap and water are not recommended methods for FFR decontamination.


Sign in / Sign up

Export Citation Format

Share Document