ABSTRACT:The behaviour of trace elements during partial melting depends primarily on their mode of occurrence. For elements occurring as trace constituents of major phases (e.g. Li, Rb, Cs, Eu, Sr, Ba, Ga, etc.), slow intracrystalline diffusion (D ≍ 10−16 cm2 s−1) at the temperature range of crustal anatexis causes all effective crystal-melt partition coefficients to have a value close to unity and impedes further melt-restite re-equilibration. Usually, therefore, the trace element composition of crustal melts simply depends on the mass balance between the proportion and composition of phases that melt and the proportion and composition of newly formed phases. The behaviour of trace elements occurring as essential structural components in accessory phases (e.g. P, La-Sm, Gd-Lu, Y, Th, U, Zr, Hf, etc.) depends on the solubility, solution kinetics, grain size and the textural position of accessory phases. In common crustal protoliths a significant mass fraction of monazite, zircon, xenotime, Th-orthosilicates, uraninite; etc.—but not apatite—is included within other major and accessory phases. During low melt fraction anatexis the amount of accessory phases available for the melt is not sufficient for saturation, thus producing leucosomes with concentrations of La-Sm, Gd-Lu, Y, Th, U and Zr lower than expected from solubility equations. Low concentrations of these elements may also occur if the melt is prevented from reaching equilibrium with the accessories due to fast segregation. However, the first mechanism seems more feasible as leucosomes that are undersaturated with respect to monazite and zircon are frequently saturated, even oversaturated, with respect to apatite.
Geochemical characteristics and mode of occurrence of trace elements in coal at West Bokaro coalfield