Tensile mechanical properties of basalt fiber reinforced polymer tendons at low to intermediate strain rates

2019 ◽  
Vol 177 ◽  
pp. 107442 ◽  
Author(s):  
Xufeng Xu ◽  
Prashant Rawat ◽  
Yanchao Shi ◽  
Deju Zhu
Keyword(s):  
Mechanical Properties ◽  
Basalt Fiber ◽  
Fiber Reinforced Polymer ◽  
Strain Rates ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Intermediate Strain Rates ◽  
Basalt Fiber Reinforced Polymer

scholarly journals Application of basalt-FRP bars for reinforcing geotechnical concrete structures

2019 ◽  
Vol 265 ◽  
pp. 05011
Author(s):  
Marta Kosior-Kazberuk
Keyword(s):  
Mechanical Properties ◽  
Limit State ◽  
Basalt Fiber ◽  
Fiber Reinforced Polymer ◽  
Ultimate Limit State ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Metallic Reinforcement ◽  
Frp Bars ◽  
Basalt Fiber Reinforced Polymer

The fiber reinforced polymer (FRP) bars have become a useful substitute for conventional reinforcement in civil engineering structures for which load capacity and resistance to environmental influences are required. They are often used in concrete structural elements exposed to strong environmental aggression, such as foundations, breakwaters and other seaside structures, road structures and tanks. The basalt fiber-reinforced polymer (BFRP) is the most recently FRP composite, appearing within the last decade. Due to their mechanical properties different from steel bars, such as higher tensile strength and lower Young's modulus, BFRP bars are predestined for use in structures for which the ultimate limit state is rather decisive than serviceability limit state. Experimental tests were carried out to assess the influence of static long-term loads and cyclic freezing/thawing on the behaviour of concrete model beams with non-metallic reinforcement. The bars made of basalt fiber reinforced polymer (BFRP) and hybrid (basalt and carbon) fiber reinforced polymer (HFRP) were used as non-metallic reinforcement. The mechanical properties of both types of bars were also determined.

Research of the Properties of Basalt Fiber Reinforced Polymer Bar for Continuously Reinforced Concrete Pavement

2014 ◽  
Vol 505-506 ◽  
pp. 184-187
Author(s):  
Qi Yang Liu ◽  
Ming He
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Matrix Material ◽  
Basalt Fiber ◽  
Concrete Pavement ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Contraction Joints ◽  
Basalt Fiber Reinforced Polymer

Continuously reinforced concrete pavement (CRCP) does not require any contraction joints which is a high-performance pavement structure type that just need a sufficient number of reinforced pavement longitudinal configuration to constrain sideway random crack width. With continuous basalt fiber as reinforced material and synthetic resin as the matrix material and adding appropriate adjuvants, basalt fiber reinforced polymer (BFRP) bar form a new type of material after pultrusion processing and surface treatment technologies. BFRP on the mechanical properties were studied by two kinds of test methods which are using extensometer strain detection and fiber optic strain sensing and the parameter of homegrown BFRP bars mechanical properties. Because of the lower tensile elastic modulus of BFRP bars compared with rebar, the mechanical properties of basalt fiber-steel wire composite bar has been studied along with the research corrosion and flexural properties of BFRP bar.

Compressive Behavior of Circular Concrete Columns Confined by Basalt Fiber Reinforced Polymer (BFRP)

2018 ◽  
Vol 765 ◽  
pp. 355-360 ◽  
Author(s):  
Sakol Suon ◽  
Shahzad Saleem ◽  
Amorn Pimanmas
Keyword(s):  
Basalt Fiber ◽  
Concrete Columns ◽  
Primary Objective ◽  
Fiber Reinforced Polymer ◽  
Small Scale ◽  
Fiber Reinforced ◽  
Compressive Behavior ◽  
Reinforced Polymer ◽  
Ductile Behavior ◽  
Basalt Fiber Reinforced Polymer

This paper presents an experimental study on the compressive behavior of circular concrete columns confined by a new class of composite materials originated from basalt rock, Basalt Fiber Reinforced Polymer (BFRP). The primary objective of this study is to observe the compressive behavior of BFRP-confined cylindrical concrete column specimens under the effect of different number of layers of basalt fiber as a study parameter (3, 6, and 9 layers). For this purpose, 8 small scale circular concrete specimens with no internal steel reinforcement were tested under monotonic axial compression to failure. The results of BFRP-confined concrete specimens of this study showed a bilinear stress-strain response with two ascending branches. Consequently, the performance of confined columns was improved as the number of BFRP layer was increased, in which all the specimens exhibited ductile behavior before failure with significant strength enhancement. The experimental results indicate the well-performing of basalt fiber in improving the concrete compression behavior with an increase in number of FRP layers.

Relaxation behavior of prestressing basalt fiber-reinforced polymer tendons considering anchorage slippage

2016 ◽  
Vol 51 (9) ◽  
pp. 1275-1284 ◽  
Author(s):  
Jianzhe Shi ◽  
Xin Wang ◽  
Huang Huang ◽  
Zhishen Wu
Keyword(s):  
Relaxation Rate ◽  
Basalt Fiber ◽  
Relaxation Behavior ◽  
Fiber Reinforced Polymer ◽  
Initial Stresses ◽  
Fiber Reinforced ◽  
Relaxation Rates ◽  
Reinforced Polymer ◽  
Relaxation Loss ◽  
Basalt Fiber Reinforced Polymer

Relaxation is a key factor that controls the application of prestressing fiber-reinforced polymer tendons. This paper focuses on the evaluation of the relaxation behavior of newly developed basalt fiber-reinforced polymer tendons through an approach considering anchorage slippage. A series of relaxation tests on basalt fiber-reinforced polymer tendons subjected to three levels of initial stresses (0.4 fu, 0.5 fu, and 0.6 fu, where fu = ultimate strength) were conducted using a specially designed test setup that eliminates the impact of slippage at the anchor zone. An additional group of tests was conducted to validate the enhancement effect of pretension on the relaxation behavior. The relaxation rates at one million hours were predicted based on experimental fitting. Finally, the relaxation rates at 1000 h were predicted using the correlation between the relaxation and creep and were validated with the experimental relaxation rates. The results demonstrate the effectiveness of the proposed setup in measuring the relaxation loss of specimens and reveal that the relaxation rates of untreated basalt fiber-reinforced polymer tendons at 1000 h are 4.2%, 5.3%, and 6.4% at 0.4 fu, 0.5 fu, and 0.6 fu, respectively. Pretension treatment performs effective in relaxation loss controlling. BFRP tendons are recommended to be applied at an initial stress of 0.5 fu after pretension treatment, with one-million-hour relaxation rate equal to 6.7%. Furthermore, the relaxation rate at 1000 h can be predicted accurately based on the creep behavior. The conclusions of this study can provide guidance for the prestressing applications of basalt fiber-reinforced polymer tendons.

Sign in / Sign up

Export Citation Format

Share Document