Linear and nonlinear static bending of sandwich beams with functionally graded porous core under different distributed loads

2021 ◽  
pp. 114538
Author(s):  
Buntoeng Srikarun ◽  
Wachirawit Songsuwan ◽  
Nuttawit Wattanasakulpong
Keyword(s):  
Functionally Graded ◽  
Sandwich Beams ◽  
Porous Core ◽  
Nonlinear Static ◽  
Linear And Nonlinear

Finite element bending analysis of symmetric and non-symmetric functionally graded sandwich beams using a novel parabolic shear deformation theory

2021 ◽  
pp. 146442072110050
Author(s):  
Mohamed-Ouejdi Belarbi ◽  
Abdelhak Khechai ◽  
Aicha Bessaim ◽  
Mohammed-Sid-Ahmed Houari ◽  
Aman Garg ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Element Model ◽  
Beam Element ◽  
Functionally Graded ◽  
Sandwich Beams

In this paper, the bending behavior of functionally graded single-layered, symmetric and non-symmetric sandwich beams is investigated according to a new higher order shear deformation theory. Based on this theory, a novel parabolic shear deformation function is developed and applied to investigate the bending response of sandwich beams with homogeneous hardcore and softcore. The present theory provides an accurate parabolic distribution of transverse shear stress across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the functionally graded sandwich beam without using any shear correction factors. The governing equations derived herein are solved by employing the finite element method using a two-node beam element, developed for this purpose. The material properties of functionally graded sandwich beams are graded through the thickness according to the power-law distribution. The predictive capability of the proposed finite element model is demonstrated through illustrative examples. Four types of beam support, i.e. simply-simply, clamped-free, clamped–clamped, and clamped-simply, are used to study how the beam deflection and both axial and transverse shear stresses are affected by the variation of volume fraction index and beam length-to-height ratio. Results of the numerical analysis have been reported and compared with those available in the open literature to evaluate the accuracy and robustness of the proposed finite element model. The comparisons with other higher order shear deformation theories verify that the proposed beam element is accurate, presents fast rate of convergence to the reference results and it is also valid for both thin and thick functionally graded sandwich beams. Further, some new results are reported in the current study, which will serve as a benchmark for future research.

Behavior of sandwich beams with functionally graded rubber core in three point bending

2011 ◽  
Vol 32 (10) ◽  
pp. 1541-1551 ◽  
Author(s):  
M.R. Doddamani ◽  
S.M. Kulkarni ◽  
Kishore
Keyword(s):  
Functionally Graded ◽  
Sandwich Beams ◽  
Three Point Bending

scholarly journals Multi-moving Loads Induced Vibration of FG Sandwich Beams Resting on Pasternak Elastic Foundation

2021 ◽  
Vol 18 (9) ◽  
Author(s):  
Wachirawit SONGSUWAN ◽  
Monsak PIMSARN ◽  
Nuttawit WATTANASAKULPONG
Keyword(s):  
Dynamic Response ◽  
Elastic Foundation ◽  
Excitation Frequency ◽  
Beam Theory ◽  
Equation Of Motion ◽  
Functionally Graded ◽  
Sandwich Beams ◽  
Moving Loads ◽  
Layer Thickness Ratio ◽  
Pasternak Elastic Foundation

The dynamic behavior of functionally graded (FG) sandwich beams resting on the Pasternak elastic foundation under an arbitrary number of harmonic moving loads is presented by using Timoshenko beam theory, including the significant effects of shear deformation and rotary inertia. The equation of motion governing the dynamic response of the beams is derived from Lagrange’s equations. The Ritz and Newmark methods are implemented to solve the equation of motion for obtaining free and forced vibration results of the beams with different boundary conditions. The influences of several parametric studies such as layer thickness ratio, boundary condition, spring constants, length to height ratio, velocity, excitation frequency, phase angle, etc., on the dynamic response of the beams are examined and discussed in detail. According to the present investigation, it is revealed that with an increase of the velocity of the moving loads, the dynamic deflection initially increases with fluctuations and then drops considerably after reaching the peak value at the critical velocity. Moreover, the distance between the loads is also one of the important parameters that affect the beams’ deflection results under a number of moving loads.

Analytical and numerical investigation of the free vibration of functionally graded materials sandwich beams

2021 ◽  
Vol 2 (110) ◽  
pp. 72-85
Author(s):  
S.H. Bakhy ◽  
M. Al-Waily ◽  
M.A. Al-Shammari
Keyword(s):  
Analytical Solution ◽  
Free Vibration ◽  
Functionally Graded Materials ◽  
Sandwich Beam ◽  
Beam Theory ◽  
Functionally Graded ◽  
Gradient Index ◽  
Sandwich Beams ◽  
Graded Materials ◽  
The Impact

Purpose: In this study, the free vibration analysis of functionally graded materials (FGMs) sandwich beams having different core metals and thicknesses is considered. The variation of material through the thickness of functionally graded beams follows the power-law distribution. The displacement field is based on the classical beam theory. The wide applications of functionally graded materials (FGMs) sandwich structures in automotive, marine construction, transportation, and aerospace industries have attracted much attention, because of its excellent bending rigidity, low specific weight, and distinguished vibration characteristics. Design/methodology/approach: A mathematical formulation for a sandwich beam comprised of FG core with two layers of ceramic and metal, while the face sheets are made of homogenous material has been derived based on the Euler–Bernoulli beam theory. Findings: The main objective of this work is to obtain the natural frequencies of the FG sandwich beam considering different parameters. Research limitations/implications: The important parameters are the gradient index, slenderness ratio, core metal type, and end support conditions. The finite element analysis (FEA), combined with commercial Ansys software 2021 R1, is used to verify the accuracy of the obtained analytical solution results. Practical implications: It was found that the natural frequency parameters, the mode shapes, and the dynamic response are considerably affected by the index of volume fraction, the ratio as well as face FGM core constituents. Finally, the beam thickness was dividing into frequent numbers of layers to examine the impact of many layers' effect on the obtained results. Originality/value: It is concluded, that the increase in the number of layers prompts an increment within the frequency parameter results' accuracy for the selected models. Numerical results are compared to those obtained from the analytical solution. It is found that the dimensionless fundamental frequency decreases as the material gradient index increases, and there is a good agreement between two solutions with a maximum error percentage of no more than 5%.

Vibration analysis of thin-walled functionally graded sandwich beams with non-uniform polygonal cross-sections

2021 ◽  
pp. 114723
Author(s):  
Tan-Tien Nguyen ◽  
Ngoc-Linh Nguyen ◽  
Jaehong Lee ◽  
Quoc-Hung Nguyen
Keyword(s):  
Cross Sections ◽  
Vibration Analysis ◽  
Functionally Graded ◽  
Sandwich Beams ◽  
Thin Walled
Sign in / Sign up

Export Citation Format

Share Document