Multiscale mechanical characteristics of ultra-high performance concrete incorporating different particle size ranges of recycled fine aggregate

2021 ◽  
Vol 307 ◽  
pp. 125131
Author(s):  
Yingwu Zhou ◽  
Dingcong Guo ◽  
Feng Xing ◽  
Menghuan Guo
Keyword(s):  
Particle Size ◽  
High Performance ◽  
Mechanical Characteristics ◽  
High Performance Concrete ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete ◽  
Recycled Fine Aggregate

scholarly journals The Influences of Iron Ore Tailings as Fine Aggregate on the Strength of Ultra-High Performance Concrete

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Zhigang Zhu ◽  
Beixing Li ◽  
Mingkai Zhou
Keyword(s):  
Particle Size ◽  
Frost Resistance ◽  
High Performance ◽  
Iron Ore ◽  
High Performance Concrete ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete ◽  
Iron Ore Tailings ◽  
Better Than

The present study looks for the feasibility of preparing UHPC with iron ore tailings (IOT for short) as fine aggregate. To enhance outstanding high performances, some influences on UHPC mortars were investigated such as different kinds of sands, different mix ratio of sands, and different largest particle size of fine aggregate. The results show that IOT have negligible poorer aggregate performance than silica sands but better than river sands. The strength of UHPC reaches the highest point when silica sands were instead 60% by IOT. As the largest particle size of fine aggregate is decreasing, the strength and frost resistance of UHPC were improved, but the liquidity was decreased. Micropowder of IOT affects the strength and the optimal content was 4%.

scholarly journals Abrasion Resistance of Ultra-High-Performance Concrete for Railway Sleepers

2021 ◽  
Author(s):  
Ariful Hasnat ◽  
Nader Ghafoori
Keyword(s):  
Prestressed Concrete ◽  
Abrasion Resistance ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Positive Influence ◽  
Cementitious Material ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete

AbstractThis study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically used for prestressed concrete sleepers. The outcomes of this study revealed that UHPCs displayed excellent resistance against abrasion, well above that of HSCs. Amongst the utilized cementitious material combinations, UHPCs made with silica fume as a partial replacement of cement performed best against abrasion, whereas mixtures containing fly ash showed the highest depth of wear. The addition of steel fibers had a more positive influence on the abrasion resistance than it did on compressive strength of the studied UHPCs.

Studies on ultra high performance concrete incorporating copper slag as fine aggregate

2015 ◽  
Vol 77 ◽  
pp. 233-240 ◽  
Author(s):  
P.S. Ambily ◽  
C. Umarani ◽  
K. Ravisankar ◽  
Prabhat Ranjan Prem ◽  
B.H. Bharatkumar ◽  
...  
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Copper Slag ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete

scholarly journals The use of ceramics as an internal curing agent in high performance concrete with variable temperature curing to improve mechanical characteristics

2022 ◽  
Vol 961 (1) ◽  
pp. 012024
Author(s):  
Abdulrasool Thamer Abdulrasool ◽  
Noor R. Kadhim ◽  
Safaa S. Mohammed ◽  
Ahmed Abdulmueen Alher
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
Mechanical Characteristics ◽  
High Performance Concrete ◽  
Variable Temperature ◽  
Porous Ceramic ◽  
Autogenous Shrinkage ◽  
Internal Curing ◽  
Fine Aggregate ◽  
Fine Aggregates

Abstract Concrete curing is one of the most significant factors in the development of compressive strength, and a high temperature difference during curing may reduce strength. The microcracks created in the concrete as a result of the constant temperature change cause this exudation. Internal curing has become popular for decreasing the risk of early-age cracking in high-performance concrete by limiting autogenous shrinkage (HPC). This study looks at the effectiveness of internal wet curing offered by a new kind of aggregate called “recycled waste porous ceramic fine aggregates”. The evolution of measured mechanical characteristics is examined on three distinct HPCs, both with and without internal curing materials. Ceramic fine aggregates were used to replace two different quantities of regular weight fine aggregate. Ceramic fine aggregates were shown to be quite beneficial for internal cure. It has been discovered that incorporating 20% ceramic fine aggregates into HPC improves the properties of the material, resulting in low internal stress and a large improvement in compressive strength. It should be emphasized that, unlike some traditional lightweight aggregates, no loss in compressive strength has been seen for the various quantities of ceramic fine aggregates introduced at either early or later ages.

Sign in / Sign up

Export Citation Format

Share Document