scholarly journals Active thermal mass enhancement using phase change materials

2016 ◽  
Vol 111 ◽  
pp. 1-11 ◽  
Author(s):  
T.R. Whiffen ◽  
G. Russell-Smith ◽  
S.B. Riffat
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Thermal Mass ◽  
Mass Enhancement

scholarly journals Thermo-physical characteristics of building integrated phase change materials (PCM) and their applicability to energy efficient homes

2021 ◽  
Author(s):  
Omar Siddiqui
Keyword(s):  
Compressive Strength ◽  
Phase Change ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Physical Characteristics ◽  
Comfort Level ◽  
Thermal Mass ◽  
Lower Phase ◽  
Physical Test ◽  
The Impact

The applicability of utilizing a variety of thermal mass including phase change materials with commonly used building materials is investigated through the use of simulations and physical testing. The thermal performance and occupant comfort potential of a novel solid-solid phase change material, known as Dal HSM, is compared and contrasted to commonly available forms of thermal mass. Detailed experimentation is conducted to successfully integrate Dal HSM with gypsum and concrete. The measurement of physical characteristics such as compressive strength and modulus of rupture is conducted to ensure that the PCM-composite compound retains the structural integrity to be utilized in a typical building. The use of thermal mass in the Toronto Net Zero house was found to contribute to energy savings of 10-15% when different types of thermal mass were used. The comfort level of the indoor occupants was also found to increase. The performance of Dal HSM was found to be comparable to a commercially available PCM known as Micronal in the heating mode. The cooling mode revealed that Dal HSM provided slightly lower energy savings when compared to Micronal due to a lower phase transition temperature and latent heat. The performance of physical test revealed a decrease in the compressive strength as the concentration of Dal HSM was increased in the PCM-gypsum specimens. Tests were also performed to analyze the impact of increasing the PCM concentration on the flexural strength of PCM-gypsum composite.

scholarly journals Incorporation of Phase Change Materials in Lightweight Aggregate Concrete

2020 ◽  
Vol 16 ◽  
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Thermal Response ◽  
Lightweight Aggregate ◽  
Hydration Heat ◽  
Lightweight Aggregate Concrete ◽  
Thermal Mass ◽  
Hardened Concrete ◽  
Bioclimatic Design ◽  
Pumice Aggregates

An investigation on some methods for the incorporation of phase change materials (PCMs) into concrete and their effect on its properties is presented. PCMs are characterized by high latent fusion heat, which can increase thermal mass of concrete and contribute to the bioclimatic design of buildings. Concrete compositions with different aggregates (limestone, lightweight or their combination), as well as with different PCMs (paraffinic and dodecyl alcohol) were prepared by different incorporation methods (impregnation to lightweight aggregates or immersion of concrete specimens). Properties of fresh and hardened concrete were studied, as well as hydration heat, thermal response and flammability. The results revealed that the selected PCMs do not significantly affect the properties of concrete. Regarding hydration heat, the presence of the PCM in concrete contributes to a decrease of the temperature peak during hydration which also occurs delayed. Thermal response measurements showed that concrete with purely pumice aggregates has a much better thermal behavior than the other two compositions, while the existence of PCM causes large or small increase of concretes heat capacity, in temperature near to each PCM’s melting point. Finally, appropriate application of PCMs is needed in order to moderate the reported effect on concrete’s fire resistance

scholarly journals A NUMERICAL SOLUTION THAT DETERMINES THE TEMPERATURE FIELD INSIDE PHASE CHANGE MATERIALS: APPLICATION IN BUILDINGS

2013 ◽  
Vol 19 (4) ◽  
pp. 518-528 ◽  
Author(s):  
Giuseppina Ciulla ◽  
Valerio Lo Brano ◽  
Antonio Messineo ◽  
Giorgia Peri
Keyword(s):  
Phase Change ◽  
Numerical Solution ◽  
Building Materials ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Transfer Problem ◽  
Energy Performance ◽  
Wall Layer ◽  
Storage Device ◽  
Thermal Mass

The use of novel building materials that contain active thermal components would be a major advancement in achieving significant heating and cooling energy savings. In the last 40 years, Phase Change Materials or PCMs have been tested as thermal mass components in buildings, and most studies have found that PCMs enhance the building energy performance. The use of PCMs as an energy storage device is due to their relatively high fusion latent heat; during the melting and/or solidification phase, a PCM is capable of storing or releasing a large amount of energy. PCMs in a wall layer store solar energy during the warmer hours of the day and release it during the night, thereby decreasing and shifting forward in time the peak wall temperature. In this paper, an algorithm is presented based on the general Fourier differential equations that solve the heat transfer problem in multi-layer wall structures, such as sandwich panels, that includes a layer that can change phase. In detail, the equations are proposed and transformed into formulas useful in the FDM approach (finite difference method), which solves the system simultaneously for the temperature at each node. The equation set proposed is accurate, fast and easy to integrate into most building simulation tools in any programming language. The numerical solution was validated using a comparison with the Voller and Cross analytical test problem.

scholarly journals Numerical Simulation of a Novel Dual Layered Phase Change Material Brick Wall for Human Comfort in Hot and Cold Climatic Conditions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4032
Author(s):  
Atiq Ur Rehman ◽  
Shakil R. Sheikh ◽  
Zareena Kausar ◽  
Sarah J. McCormack
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Thermal Characteristics ◽  
Extended Period ◽  
Climatic Conditions ◽  
Heat Of Fusion ◽  
Thermal Mass ◽  
Brick Wall ◽  
Latent Heat Storage ◽  
Human Comfort

Phase change materials (PCMs) have a large number of applications for thermal energy storage (TES) and temperature reduction in buildings due to their thermal characteristics and latent heat storage capabilities. The thermal mass of typical brick walls can be substantially increased using a suitable PCM primarily based on phase change temperature and heat of fusion for different weather conditions in summer and winter. This study proposed a novel dual-layer PCM configuration for brick walls to maintain human comfort for hot and cold climatic conditions in Islamabad, Pakistan. Numerical simulations were performed using Ansys Fluent for dual PCMs layered within a brick wall for June and January with melting temperatures of 29 °C and 13 °C. This study examined and discussed the charging and discharging cycles of PCMs over an extended period (one month) to establish whether the efficacy of PCMs is hindered due to difficulties in discharging. The results show that the combined use of both PCMs stated above provides better human comfort with reduced energy requirements in Islamabad throughout the year than using a single PCM (29 °C) for summer or winter (13 °C) alone.

scholarly journals Thermo-physical characteristics of building integrated phase change materials (PCM) and their applicability to energy efficient homes

2021 ◽  
Author(s):  
Omar Siddiqui
Keyword(s):  
Compressive Strength ◽  
Phase Change ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Physical Characteristics ◽  
Comfort Level ◽  
Thermal Mass ◽  
Lower Phase ◽  
Physical Test ◽  
The Impact

The applicability of utilizing a variety of thermal mass including phase change materials with commonly used building materials is investigated through the use of simulations and physical testing. The thermal performance and occupant comfort potential of a novel solid-solid phase change material, known as Dal HSM, is compared and contrasted to commonly available forms of thermal mass. Detailed experimentation is conducted to successfully integrate Dal HSM with gypsum and concrete. The measurement of physical characteristics such as compressive strength and modulus of rupture is conducted to ensure that the PCM-composite compound retains the structural integrity to be utilized in a typical building. The use of thermal mass in the Toronto Net Zero house was found to contribute to energy savings of 10-15% when different types of thermal mass were used. The comfort level of the indoor occupants was also found to increase. The performance of Dal HSM was found to be comparable to a commercially available PCM known as Micronal in the heating mode. The cooling mode revealed that Dal HSM provided slightly lower energy savings when compared to Micronal due to a lower phase transition temperature and latent heat. The performance of physical test revealed a decrease in the compressive strength as the concentration of Dal HSM was increased in the PCM-gypsum specimens. Tests were also performed to analyze the impact of increasing the PCM concentration on the flexural strength of PCM-gypsum composite.

scholarly journals Experimental Study of Using Micro-Encapsulated Phase-Change Material Integrated into Hemp Shive Wallboard

Buildings ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 228
Author(s):  
Edgars Kirilovs ◽  
Inga Zotova ◽  
Staņislavs Gendelis ◽  
Hans Jörg-Gusovius ◽  
Silvija Kukle ◽  
...  
Keyword(s):  
Heat Capacity ◽  
Phase Change ◽  
Phase Change Materials ◽  
New Technologies ◽  
Urea Formaldehyde ◽  
Single Layer ◽  
Mass Effect ◽  
Automatic Regulation ◽  
Formaldehyde Resin ◽  
Thermal Mass

Phase change materials (PCMs) are now widely known as potential additives for building insulation materials to provide a thermal mass effect that helps conserve energy and maintain a comfortable indoor temperature. Therefore, the study presented in this paper focuses on an experimental investigation of the specific heat capacity and thermal conductivity of hemp shive mixed with PCMs. Industrially manufactured organic PCM-S50 received from MikroCaps Ltd. (Slovenia) has been used to further enhance respective properties of the product samples. The experimental boards were made from hemp shive by directly mixing 5% encapsulate PCMs into the mass. Cold pressing was used to manufacture the boards with Kleiberit urea formaldehyde resin glue as a binding agent. The experimental boards were made as 25 mm thick single-layer parts with a density of 300 ± 20 kg/m3, which qualify them as low-density boards. By adding nanocapsules during the board manufacturing process, the heat capacity is increased by 62%. Based on the great potential of using latent heat, it becomes a possible solution for the development of new technologies related to the automatic regulation of an indoor microclimate.

scholarly journals A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings

2020 ◽  
Vol 12 (22) ◽  
pp. 9481
Author(s):  
Monika Gandhi ◽  
Ashok Kumar ◽  
Rajasekar Elangovan ◽  
Chandan Swaroop Meena ◽  
Kishor S. Kulkarni ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Liquid State ◽  
Energy Demand ◽  
Phase Change Materials ◽  
Temperature Fluctuations ◽  
Good Evidence ◽  
Thermal Mass ◽  
Indoor Temperature

Many countries in the Global South have hot and dry climates with large diurnal temperature variations, which leads to large demand for space cooling—which is likely to increase with climate change. A common approach to dampen the indoor temperature fluctuations and thus reduce cooling energy demand is the use of thermal mass. However, the use of lightweight structures in many cities (e.g., high-rise structures, or for earthquake protection) precludes the use of traditional forms of thermal mass. Therefore, phase change materials (PCMs) are being widely developed as thermal energy storage systems for building applications. However, challenges such as leakage of PCMs in liquid state and their low thermal conductivity, still limit their applications in buildings. In this paper, we review the potential of Form or Shape-Stabilized Phase Change Materials (SSPCMs), which are developed by incorporating the PCM into a supporting matrix to prevent leakage in liquid state whilst improving thermal conductivity. We review different methods of preparation and the resultant thermal properties and chemical stability. We find good evidence in the literature for SSPCMs to reduce PCM leakage in liquid state, dampen indoor temperature fluctuations, and potentially alleviate peak energy demand by shifting peak loads to off-peak periods.

Sign in / Sign up

Export Citation Format

Share Document