Experimental and theoretical investigation of a novel full-open absorption heat pump applied to district heating by recovering waste heat of flue gas

2018 ◽  
Vol 173 ◽  
pp. 45-57 ◽  
Author(s):  
Bo Yang ◽  
Yi Jiang ◽  
Lin Fu ◽  
Shigang Zhang
2012 ◽  
Vol 170-173 ◽  
pp. 2747-2750
Author(s):  
Xi Ling Zhao ◽  
Zhong Hai Zheng ◽  
Lin Fu ◽  
Yan Li

How to use the waste heat deeply are a critical issue for BCHP (Building combined cooling heating and power) system. A BCHP system with a soil source absorption heat pump driven by the waste heat is proposed. The system is composed of an internal combustion engine, a soil source absorption heat pump driven by the flue gas, and other assistant facilities, such as pumps, fans, and end user devices. In the winter, the flue gas is used to drive absorption heat pump to recover the waste heat of the soil source and the condensation heat of the flue gas simultaneously, and in the summer, the waste heat of the flue gas is used to drive absorption heat pump to cooling, and the heat sink is the soil. In the paper, the configuration of this kind of system is designed, and the energy analysis of the system is done all the year. Compared with the conventional BCHP system, the operation cost is lowered greatly and the increased investment could be returned within one year. It is show that the system is the efficient integration of cleaning energy, renewable energy, the discharge of the flue gas could be reduced to below 30°C, and the water steam could be catch to avoid the white smoke of the stack. The energy saving in space heating could be 66% compared with the conventional BCHP systems.


Author(s):  
X. L. Zhao ◽  
L. Fu ◽  
S. G. Zhang ◽  
J. Z. Zhu ◽  
B. M. Huang ◽  
...  

A critical issue for BCHP (Building combined cooling heating and power) system is the efficient integration of power generation equipment with different heat utilization technologies. A BCHP system with an urban original sewage source absorption heat pump is proposed. The system is composed of an internal combustion engine, a water-water heat exchanger, a flue gas driven absorption heat pump, a filth block device, a wastewater heat exchanger, and other assistant facilities, such as pumps, fans, and end user devices. In the winter, the waste heat of the flue gas is used to drive absorption heat pump to recover the waste heat of sewage source and the flue gas, and in the summer, the waste heat of the flue gas is used to drive absorption heat pump for cooling, and the heat load of the building is removed to the sewage. In the paper, this kind of system was designed according to the energy consumption of the buildings, and the overall performance of the system in the heating and cooling mode was studied, and the energy efficiency level was analyzed. It is shown that the system is the efficient integration of clean energy and waste heat resource, and the energy efficiency of the system could be improved by 18.5% compared with the conventional BCHP systems.


Author(s):  
Xiling Zhao ◽  
Lin Fu ◽  
Xiao Wang

Because of the performance of the power generation equipment is almost perfect, how to integrate the thermally-activated technologies and use the waste heat deeply are a critical issue for CCHP (Combined cooling heating and power) system. According to the characteristics of a typical end user’s demands, a CCHP system with the flue gas and geothermal energy is proposed. The system is composed of an internal combustion engine, a soil source absorption heat pump driven by the flue gas, and other assistant facilities, such as pumps, fans, and end user devices. In the winter, the flue gas is used to drive absorption heat pump to recover the waste heat of the soil source and the condensation heat of the flue gas simultaneously, and in the summer, the waste heat of the flue gas is used to drive absorption heat pump to cooling, and the heat sink is the soil. In the paper, the energy analysis of the system is done. Compared with the conventional CCHP system, the operation cost is lowered greatly and the increased investment could be returned within one year. It is show that the system is the efficient integration of clean energy, renewable energy, the discharge of the flue gas could be reduced to below 30°C, and the water steam could be catch to avoid the white smoke of the stack.


Author(s):  
Fangtian Sun ◽  
Lin Fu ◽  
Shigang Zhang

Space heating area of district heating system of combined heat and power (CHP) accounts for approximately one third of total space heating area in Chinese northern cities. In the extraction condensing turbine combined heat and power system based on district heating network, there are a large number of low-grade waste heat in the condenser, and exergy loss in the steam-water heat exchanger and water-water heat exchanger. Based on absorption heat pump technology, a new high-temperature district heating technology (DHSAHP) was presented to improve the current district heating system of CHP. Absorption heat pumps are used to recycle low-temperature waste heat in condenser. Absorption heat pump type heat exchanger is used to reduce temperature of return water in primary heat network, and decrease irreversible loss. Where, DHSAHP was analyzed by thermodynamics and economics method, and evaluated by exergetic efficiency, exergetic output cost, exergetic cost difference and exergoeconomic factor. Compared with current district heating system of CHP, DHSAHP can decrease about 31.3% steam consumption, increase about 75% transmission and distribution capacity of the primary heating network. The evaluation results show that the exergetic efficiency of new district heating system of CHP based on the absorption cycle technology is higher 10.41% than that of current district heating system of CHP, whereas its exergetic cost is lower 36.6¥/GJ than that of the conventional district heating system. With the increase of annual heating time, economy efficiency of new district heating system of CHP becomes better. The DHSAHP has higher energy utilization efficiency and better economic benefits and provides a kind of better technological method to solve the main problems of cuurent district heating with CHP in China.


Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 954 ◽  
Author(s):  
Hanne Kauko ◽  
Daniel Rohde ◽  
Armin Hafner

District heating enables an economical use of energy sources that would otherwise be wasted to cover the heating demands of buildings in urban areas. For efficient utilization of local waste heat and renewable heat sources, low distribution temperatures are of crucial importance. This study evaluates a local heating network being planned for a new building area in Trondheim, Norway, with waste heat available from a nearby ice skating rink. Two alternative supply temperature levels have been evaluated with dynamic simulations: low temperature (40 °C), with direct utilization of waste heat and decentralized domestic hot water (DHW) production using heat pumps; and medium temperature (70 °C), applying a centralized heat pump to lift the temperature of the waste heat. The local network will be connected to the primary district heating network to cover the remaining heat demand. The simulation results show that with a medium temperature supply, the peak power demand is up to three times higher than with a low temperature supply. This results from the fact that the centralized heat pump lifts the temperature for the entire network, including space and DHW heating demands. With a low temperature supply, heat pumps are applied only for DHW production, which enables a low and even electricity demand. On the other hand, with a low temperature supply, the district heating demand is high in the wintertime, in particular if the waste heat temperature is low. The choice of a suitable supply temperature level for a local heating network is hence strongly dependent on the temperature of the available waste heat, but also on the costs and emissions related to the production of district heating and electricity in the different seasons.


Sign in / Sign up

Export Citation Format

Share Document