Reductions in electricity consumption and power demand in case of the mass use of compact fluorescent lamps

Energy ◽  
2009 ◽  
Vol 34 (9) ◽  
pp. 1355-1363 ◽  
Author(s):  
J. Trifunovic ◽  
J. Mikulovic ◽  
Z. Djurisic ◽  
M. Djuric ◽  
M. Kostic
2020 ◽  
pp. 1-78 ◽  
Author(s):  
Eliana Carranza ◽  
Robyn Meeks

Overloaded electrical systems are a major source of unreliable power. Using a randomized saturation design, we estimate the impact of compact fluorescent lamps (CFLs) on electricity reliability and household electricity consumption in the Kyrgyz Republic. Greater saturation of CFLs within a transformer leads to fewer outages, a technological externality benefitting all households, regardless of individual adoption. Spillovers in CFL adoption further reduce electricity consumption, contributing to increased reliability within a transformer. CFLs' impacts on household electricity consumption vary according to the effects on reliability. Receiving CFLs significantly reduces electricity consumption, but increased reliability permits greater consumption of electricity services.


2015 ◽  
Vol 35 (1Sup) ◽  
pp. 89-97 ◽  
Author(s):  
Gabriel Alexis Malagon ◽  
Jeisson Bello Peña ◽  
Gabriel Ordóñez Plata ◽  
Cesar Duarte Gualdrón

<p class="MsoNormal" style="text-align: justify;"><span style="font-family: 'Century Gothic', sans-serif; font-size: 8pt; letter-spacing: -0.1pt;"><span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">This article presents an analysis and discussion on the performance of a circuit-based model for Compact Fluorescent Lamps (CFL) <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">in a 120V 60Hz power grid. This model is proposed and validated in previous scientific literature for CFLs in 230V 50Hz systems. <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">Nevertheless, the derivation of this model is not straightforward to follow and its performance in 120V 60Hz systems is a matter of <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">research work. In this paper, the analytical derivation of this CFL model is presented in detail and its performance is discussed when <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">predicting the current of a CFL designed to operate in a 120V 60Hz electrical system. The derived model is separately implemented <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">in both MATLAB<span style="font-family: OptimaLTStd; font-size: 5pt; color: #231f20; font-style: normal; font-variant: normal;">® <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">and ATP-EMTP<span style="font-family: OptimaLTStd; font-size: 5pt; color: #231f20; font-style: normal; font-variant: normal;">® <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">software using two different sets of parameters previously proposed for 230V 50Hz CFLs. These <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">simulation results are compared against laboratory measurements using a programmable AC voltage source. The measurements <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">and simulations considered seven CFLs 110/127V 60Hz with different power ratings supplied by a sinusoidal (not distorted) voltage <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">source. The simulations under these conditions do not properly predict the current measurements and therefore the set of parameters <span style="font-family: OptimaLTStd; font-size: 9pt; color: #231f20; font-style: normal; font-variant: normal;">and/or the model itself need to be adjusted for 120V 60Hz power grids.</span></span></span></span></span></span></span></span></span><br style="font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: -webkit-auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px;" /></span></span></span></span></span></span></p>


Author(s):  
J. S. Adeleke ◽  
A. B. Wahab ◽  
E. A. Olanipekun

Over the years, visual comfort has been described as a major requirement needed to enhance optimal performance of occupants in any learning environment in tertiary institutions. This is reflected in the poor performance of the commonly used Fluorescent Lamps (FL) occasioned by its constant burn-off, high failure rate and reduced durability. Hence, there is a shift to the adoption of Compact Fluorescent Lamp (CFL) and Light Emitting Diode (LED). This study therefore examined the pattern of electricity consumption involving the adoption of FL, CFL and LED in the purposively selected lecture theatres of Obafemi Awolowo University, Ile-Ife, Nigeria. The study was carried out using energy monitor to obtain the consumption data of the lamps for periodic logging at intervals of 1 hr, 3 hrs, 6 hrs, 12 hrs, 1 day, 7 days, 1 month and 3 months respectively; and also to determine the payback period of each of the lamps. From the data collected, patterns of electricity used, electricity savings were calculated and compared to establish performance potentials of each of the lamps. The study found that there was a significant difference in the pattern of electricity consumption of FLs compared with that of CFLs and LEDs, but a reduced margin existed between CFLs and LED lamps. It showed that the FLs consumed 681.576 kWh, 1619.466 kWh and 5652.432 kWh, CFLs consumed 387.302 kWh, 692.479 kWh and 1936.600 kWh, while LED consumed 294.188 kWh, 426.608 kWh and 1499.015 kWh. There were significant differences in consumption with 43, 47 and 65% reduction in electricity consumption using CFLs while 57, 73 and 73% using LED fittings were obtained. The CFLs performed better in terms of return on investments by having a lower payback period when compared to LED. The study concluded that replacing FL with CFL and LED would be desirable option in order to enhance optimal performance of lecture theatres, but in terms of payback period, it would be beneficial to retrofit FLs with CFLs.


Sign in / Sign up

Export Citation Format

Share Document