Seismic performance of precast concrete column-to-column lap-splice connections

2018 ◽  
Vol 172 ◽  
pp. 687-699 ◽  
Author(s):  
José F. Rave-Arango ◽  
Carlos A. Blandón ◽  
José I. Restrepo ◽  
Fabio Carmona
Keyword(s):  
Seismic Performance ◽  
Precast Concrete ◽  
Concrete Column ◽  
Lap Splice

scholarly journals Experimental Study on the Behavior of Existing Reinforced Concrete Multi-Column Piers under Earthquake Loading

2021 ◽  
Vol 11 (6) ◽  
pp. 2652
Author(s):  
Jung Han Kim ◽  
Ick-Hyun Kim ◽  
Jin Ho Lee
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Bridge Piers ◽  
Scale Model ◽  
Inertia Force ◽  
Small Scale ◽  
Lap Splice ◽  
Existing Structures ◽  
Seismic Design Code ◽  
Seismic Force

When a seismic force acts on bridges, the pier can be damaged by the horizontal inertia force of the superstructure. To prevent this failure, criteria for seismic reinforcement details have been developed in many design codes. However, in moderate seismicity regions, many existing bridges were constructed without considering seismic detail because the detailed seismic design code was only applied recently. These existing structures should be retrofitted by evaluating their seismic performance. Even if the seismic design criteria are not applied, it cannot be concluded that the structure does not have adequate seismic performance. In particular, the performance of a lap-spliced reinforcement bar at a construction joint applied by past practices cannot be easily evaluated analytically. Therefore, experimental tests on the bridge piers considering a non-seismic detail of existing structures need to be performed to evaluate the seismic performance. For this reason, six small scale specimens according to existing bridge piers were constructed and seismic performances were evaluated experimentally. The three types of reinforcement detail were adjusted, including a lap-splice for construction joints. Quasi-static loading tests were performed for three types of scale model with two-column piers in both the longitudinal and transverse directions. From the test results, the effect on the failure mechanism of the lap-splice and transverse reinforcement ratio were investigated. The difference in failure characteristics according to the loading direction was investigated by the location of plastic hinges. Finally, the seismic capacity related to the displacement ductility factor and the absorbed energy by hysteresis behavior for each test were obtained and discussed.

Comparing the Seismic Performance of Beam-Column Joints with and without SFRC when Subjected to Cyclic Loading

2012 ◽  
Vol 626 ◽  
pp. 85-89 ◽  
Author(s):  
Kay Dora Abdul Ghani ◽  
Nor Hayati Hamid
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Seismic Performance ◽  
Experimental Work ◽  
Concrete Beam ◽  
Steel Fiber ◽  
Precast Concrete ◽  
Experimental Results ◽  
Column Joint ◽  
Initial Cracks

The experimental work on two full-scale precast concrete beam-column corner joints with corbels was carried out and their seismic performance was examined. The first specimen was constructed without steel fiber, while second specimen was constructed by mixed up steel fiber with concrete and placed it at the corbels area. The specimen were tested under reversible lateral cyclic loading up to ±1.5% drift. The experimental results showed that for the first specimen, the cracks start to occur at +0.5% drifts with spalling of concrete and major cracks were observed at corbel while for the second specimen, the initial cracks were observed at +0.75% with no damage at corbel. In this study, it can be concluded that precast beam-column joint without steel fiber has better ductility and stiffness than precast beam-column joint with steel fiber. However, precast beam-column joint with steel fiber has better energy dissipation and fewer cracks at corbel as compared to precast beam-column joint without steel fiber.

Slender Precast Concrete Column with Steel Plates using façade ofthe Building

2015 ◽  
Vol 104 (23) ◽  
pp. 1-8
Author(s):  
Masano Yanagihara ◽  
Yuichi Koitabashi
Keyword(s):  
Precast Concrete ◽  
Steel Plates ◽  
Concrete Column
Sign in / Sign up

Export Citation Format

Share Document