Impact behavior of concrete-filled steel tube with cruciform reinforcing steel under lateral impact load

2021 ◽  
Vol 247 ◽  
pp. 113104
Author(s):  
Xiang Zhu ◽  
Miao Kang ◽  
Yifan Fei ◽  
Qi Zhang ◽  
Rui Wang
Keyword(s):  
Impact Load ◽  
Steel Tube ◽  
Impact Behavior ◽  
Reinforcing Steel ◽  
Lateral Impact ◽  
Concrete Filled Steel Tube

scholarly journals Investigation of the effect of impact load on concrete-filled steel tube columns under fire

2020 ◽  
Vol 14 (54) ◽  
pp. 317-324
Author(s):  
Ali Golsoorat Pahlaviani ◽  
Ali Mohammad Rousta ◽  
Peyman Beiranvand
Keyword(s):  
Impact Load ◽  
High Strength ◽  
Concrete Columns ◽  
Steel Tube ◽  
Lateral Impact ◽  
Concrete Filled Steel Tube ◽  
Axial Strength ◽  
High Rise ◽  
Working Space ◽  
Cfst Columns

Concrete-filled steel tube (CFST) columns are increasingly used in the construction of high-rise buildings which require high strength and large working space especially at lower stories. As compared to reinforced concrete columns, existence of the exterior steel tube not only bears a portion of axial load but also most importantly provides confinement to the infill concrete.with the confinement provided by the steel tube, axial strength of the infill concrete can be largely enhanced.this paper presents the investigation effect of impact load on concrete-filled steel tube columns under fire by numerical simulations using ABAQUS software.the results indicate that the CFST sections with larger confinement factor ξ=1.23 behaved in a very ductile manner under lateral impact. And the sections with smaller confinement factor ξ=0.44  generally behaved in a brittle mechanism.

Computer analysis of impact behavior of concrete filled steel tube columns

2015 ◽  
Vol 89 ◽  
pp. 52-63 ◽  
Author(s):  
S. Aghdamy ◽  
D.P. Thambiratnam ◽  
M. Dhanasekar ◽  
S. Saiedi
Keyword(s):  
Computer Analysis ◽  
Steel Tube ◽  
Impact Behavior ◽  
Concrete Filled Steel Tube

Study on the Impact Response of Concrete Filled FRP-Steel Tube Structures

2011 ◽  
Vol 368-373 ◽  
pp. 549-552
Author(s):  
Chen Chen ◽  
Ying Hua Zhao ◽  
Chun Yang Zhu ◽  
Li Wei
Keyword(s):  
Impact Load ◽  
Steel Tube ◽  
Fiber Reinforced Polymer ◽  
Experimental Result ◽  
Lateral Impact ◽  
Steel Tubes ◽  
Impact Performance ◽  
Reinforced Polymer ◽  
The Impact ◽  
Frp Sheet

This paper studies the impact performance of concrete filled FRP-steel tube which is a composed structure made by filling concrete into steel tube and wrapping outside with fiber reinforced polymer (FRP) sheet. Numerical simulations have been conducted to study the dynamic response of fixed-pined supported beams of concrete filled FRP-steel tubes. The finite element models of concrete filled FRP-steel tubes are established to analyse its lateral impact dynamic characteristics under different loading situations, with respective kinds of FRP and thicknesses of steel tubes. The impact force and displacement histories were recorded. Comparing to the traditional concrete filled steel tube structure, the concrete filled FRP-steel tube indicates a promising structure with more advantages in the mechanical and constructional performance. Especially with its higher loading-carrying capacity and better toughness, it is more adaptable for the structures subjected to accidental impact load. Analytical solution is compared with experimental result to show the correctness and the effectiveness of present study.

Performance of hollow steel tube bollards under quasi-static and lateral impact load

2015 ◽  
Vol 88 ◽  
pp. 41-47 ◽  
Author(s):  
Soheila Maduliat ◽  
Tuan Duc Ngo ◽  
Phuong Tran ◽  
Raymond Lumantarna
Keyword(s):  
Impact Load ◽  
Steel Tube ◽  
Lateral Impact

scholarly journals Parameter Analysis on the Anti-Impact Behavior of Pcfst Columns under Lateral Impact Load

2018 ◽  
Vol 206 ◽  
pp. 01020
Author(s):  
W Xu ◽  
A Z Zhu ◽  
K Gao
Keyword(s):  
Yield Strength ◽  
Impact Energy ◽  
Impact Load ◽  
Parameter Analysis ◽  
Impact Behavior ◽  
Lateral Impact ◽  
Fea Model ◽  
Filling Height ◽  
Concrete Filling ◽  
The Impact

Concrete-filled steel tubular (CFST) structures have been widel y used in civil engineering structures, due to its good behaviors under both static and dynamic loads. In this paper, numerical studies were carried out to investigate the anti-impact behavior of partially concrete-filled steel tubular (PCFST) columns under lateral impact loads. Finite element analysis (FEA) model was established using ABAQUS. To validate the FEA model, the numerical results were compared with experimental results. Moreover, parameter analysis was carried out to further study the anti-impact behaviors of the PCFST columns. The concrete filling height, the impact energy, the impact direction, and the yield strength of steel were the main parameters considered in this study. The dynamic responses under the impact load, including the impact force, the failure mode, and the displacement response, were all analyzed. The results of parameter analysis showed that the anti-impact behaviors of the PCFST columns significantly increased when the concrete filling height or the yield strength of steel increased greatly. The impact energy and direction also greatly affected the anti-impact behaviors of the PCFST columns.

scholarly journals CIRCULAR DOUBLE SKIN STAINLESS STEEL TUBULAR COLUMN FILLED WITH UHPFRC SUBJECTED TO IMPACT LOAD

2021 ◽  
pp. 1-11
Author(s):  
KHALID ABDEL NASER ABDEL RAHIM
Keyword(s):  
Smart Materials ◽  
Impact Loading ◽  
Failure Modes ◽  
Impact Load ◽  
Steel Tube ◽  
Fiber Reinforced Concrete ◽  
Lateral Impact ◽  
Transverse Impact ◽  
Residual Displacements ◽  
Double Skin

Concrete filled steel tube (CFST) column is an important type of structural member and its protective design is essential to enhance its structural performance under various dynamic loads. Previously carried out studies on CFST columns tried to determine how to improve their structural response under various loadings, such as axial compression, lateral impact, blast, seismic, etc. Apart from investigations on transverse impact loading, the majority of the other studies on CFST under various loads established solutions and protective measures. Therefore, this study aim is to improve the performance of CFST under transverse impact loads. The geometrical and mechanical properties, boundary conditions, impact loading and dynamic explicit analysis employed in that study. This paper proposes a novel design in terms of cross-sectional configuration and smart materials to be applied on the CFST in order to improve its performance under lateral impact loading. The proposed investigation is exclusively numerical and its results were verified with the experimental results from literature. The considered three main variables were including (1) concrete-filled double skin steel tubular – CFDST with both first sandwich layer and internal carbon steel tube filled with normal strength concrete – NSC, (2) CFDST with first sandwich layer filled with Ultra High-Performance Fiber-Reinforced Concrete – UHPFRC. a. The parameters including failure modes, maximum mid-span deflection, and residual displacements were presented.

Analysis of Circular Concrete-Filled Steel Tube Specimen under Lateral Impact

2011 ◽  
Vol 14 (5) ◽  
pp. 941-951 ◽  
Author(s):  
Haiyan Qu ◽  
Guoqiang Li ◽  
Suwen Chen ◽  
Jianyun Sun ◽  
Mete. A. Sozen
Keyword(s):  
Steel Tube ◽  
Lateral Impact ◽  
Concrete Filled Steel Tube

Influence of Hoop Coefficient on Dynamic Response of Railway Bridge Protective Frame under Impact Load

2011 ◽  
Vol 291-294 ◽  
pp. 1321-1326
Author(s):  
Ao Tian Ju ◽  
Shu Ying Qu ◽  
Xing Min Hou ◽  
Jin Tian Wang
Keyword(s):  
Dynamic Response ◽  
Wall Thickness ◽  
Tube Wall ◽  
Impact Load ◽  
Steel Tube ◽  
Railway Bridge ◽  
Concrete Filled Steel Tube ◽  
Tube Wall Thickness ◽  
Average Impact ◽  
Tube Structure

The paper analyzes that hoop coefficients of the concrete-filled steel tube influence on dynamic response of the railway bridge height limit protective frame under impact load by using ANSYS/LS-DYNA. Change hoop coefficient of the concrete-filled steel tube structure by changing steel tube wall thickness. The result shows that with increase of steel tube wall thickness, the average impact force of protective frame will increase and the displacement and deformation will reduce, and protective frame can resist greater impact load. It will provide the reference for design of railway bridge height limit protective frame.

Sign in / Sign up

Export Citation Format

Share Document