Chemical interesterification of soybean oil and methyl acetate to FAME using CaO as catalyst

Biodiesel is an alternative diesel fuel made from renewable biological resources. During the process of biodiesel production, lipase-catalyzed transesterification is a crucial step. However, current techniques using methanol as acyl acceptor have lower enzymatic activity; this limits the application of such techniques in large-scale biodiesel production. Furthermore, the lipid feedstock of currently available techniques is limited. In this paper, the technique of lipase-catalyzed transesterification of five different oils for biodiesel production with methyl acetate as acyl acceptor was investigated, and the transesterification reaction conditions were optimized. The operation stability of lipase under the obtained optimal conditions was further examined. The results showed that under optimal transesterification conditions, both plant oils and animal fats led to high yields of methyl ester: cotton-seed oil, 98%; rapeseed oil, 95%; soybean oil, 91%; tea-seed oil, 92%; and lard, 95%. Crude and refined cottonseed oil or lard made no significant difference in yields of methyl ester. No loss of enzymatic activity was detected for lipase after being repeatedly used for 40 cycles (ca. 800 h), which indicates that the operational stability of lipase was fairly good under these conditions. Our results suggest that cotton-seed oil, rape-seed oil and lard might substitute soybean oil as suitable lipid feedstock for biodiesel production. Our results also show that our technique is fit for various lipid feedstocks both from plants and animals, and presents a very promising way for the large-scale biodiesel production

Download Full-text

Purification of Methyl Acetate/Water Mixtures from Chemical Interesterification of Vegetable Oils by Pervaporation

Energies ◽

10.3390/en14030775 ◽

2021 ◽

Vol 14 (3) ◽

pp. 775

Author(s):

Abraham Casas ◽

Ángel Pérez ◽

María Jesús Ramos

Keyword(s):

Methyl Acetate ◽

Operating Temperature ◽

Operating Conditions ◽

Biodiesel Production ◽

Design Parameters ◽

Chemical Interesterification ◽

Permeate Flux ◽

A Value ◽

Pervaporation Membrane ◽

Hydrophilic Character

Biodiesel production through chemical interesterification of triglycerides requires an excess of methyl acetate that must be recovered once the reaction is finished and the catalyst is neutralized. The present study concerns with the purification of methyl acetate by pervaporation. PERVAP 2201 was chosen as pervaporation membrane due to its high hydrophilic character that makes it suitable for the elimination of water in methyl acetate. Runs were started from concentrations in the feed of 2–8 wt.% of water and working temperatures close to the boiling point of methyl acetate (50, 60, and 70 °C), to get the main design parameters, i.e., permeate flux and selectivity. High temperature favored the permeate flux without compromising the selectivity. However, the flux declines significantly when water contained in the feed is below 2 wt.%. This implies that pervaporation should be used, only to decrease the water content to a value lower than in the azeotrope (2.3% by weight). A solution-diffusion model relating the flux of the permeating compound with the activity of the compound in the feed and the operating temperature has been proposed. The model obtained can be used in the design of the pervaporation stage, thus allowing to know the permeate flux for the different operating conditions.

Download Full-text