scholarly journals Spatial variability of hydraulic conductivity and solute transport parameters and their spatial correlations to soil properties

Geoderma ◽  
2019 ◽  
Vol 339 ◽  
pp. 59-69 ◽  
Author(s):  
Vanessa A. Godoy ◽  
Lázaro Valentin Zuquette ◽  
J. Jaime Gómez-Hernández
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Boguslaw Usowicz ◽  
Jerzy Lipiec

AbstractSaturated hydraulic conductivity (K) is a key property for evaluating soil water movement and quality. Most studies on spatial variability of K have been performed soil at a field or smaller scale. Therefore, the aim of this work was to assess (quantify) the spatial distribution of K at the larger regional scale in south-eastern Poland and its relationship with other soil properties, including intrinsic sand, silt, and clay contents, relatively stable organic carbon, cation exchange capacity (CEC) and temporally variable water content (WC), total porosity (FI), and dry bulk density (BD) in the surface layer (0–20 cm). The spatial relationships were assessed using a semivariogram and a cross-semivariogram. The studied region (140 km2) with predominantly permeable sandy soils with low fertility and productivity is located in the south-eastern part of Poland (Podlasie region). The mean sand and organic carbon contents are 74 and 0.86 and their ranges (in %) are 45–95 and 0.002–3.75, respectively. The number of individual samples varied from 216 to 228 (for K, WC, BD, FI) to 691 for the other soil properties. The best fitting models were adjusted to the empirical semivariogram (exponential) and the cross-semivariogram (exponential, Gaussian, or linear) used to draw maps with kriging. The results showed that, among the soil properties studied, K was most variable (coefficient of variation 77.3%) and significantly (p < 0.05) positively correlated with total porosity (r = 0.300) and negatively correlated with soil bulk density (r = – 0.283). The normal or close to the normal distribution was obtained by natural logarithmic and root square transformations. The mean K was 2.597 m day−1 and ranged from 0.01 up to 11.54 m day−1. The spatial autocorrelation (range) of K in the single (direct) semivariograms was 0.081° (8.1 km), while it favourably increased up to 0.149°–0.81° (14.9–81 km) in the cross-semivariograms using the OC contents, textural fractions, and CEC as auxiliary variables. The generated spatial maps allowed outlining two sub-areas with predominantly high K above 3.0 m day−1 in the northern sandier (sand content > 74%) and less silty (silt content < 22%) part and, with lower K in the southern part of the study region. Generally, the spatial distribution of the K values in the study region depended on the share of individual intrinsic textural fractions. On the other hand, the ranges of the spatial relationship between K and the intrinsic and relatively stable soil properties were much larger (from ~ 15 to 81 km) than between K and the temporally variable soil properties (0.3–0.9 km). This knowledge is supportive for making decisions related to land management aimed at alteration of hydraulic conductivity to improve soil water resources and crop productivity and reduce chemical leaching.


2018 ◽  
Vol 7 (1) ◽  
pp. 12
Author(s):  
Shwetha Prasanna

Soils are a product of the factors of formation and continuously change over the earth’s surface. The analysis of the spatial variability of soil properties is important for land management and construction of an ecological environment. Soils are characterized by high degree of spatial variability due to the combined effect of physical, chemical or biological processes that operate with different intensities and at different scales. The spatial variability of soil hydraulic properties helps us to find the subsurface flux of water. The most frequently used hydraulic properties are soil water retention curve and saturated hydraulic conductivity. Both these hydraulic properties exhibit a high degree of spatial and temporal variability. The primary objective of this study was to analyze the spatial variability of hydraulic properties of forest soils of Pavanje river basin. Correlation analysis technique has been used to analyze various soil properties. Spatial variability of the forested hillslope soils at different depths varied considerably among the soil hydraulic properties. The spatial variability of water retention at all the different pressure head is low at the top layers, and increases towards the bottom layers. The saturated hydraulic conductivity is almost same in the top layers, but more in the bottom layers of forest soil.


Soil Research ◽  
1969 ◽  
Vol 7 (3) ◽  
pp. 277 ◽  
Author(s):  
T Talsma

Experiments on a number of field soils have provided data to check the applicability of recently proposed theory on infiltration from semi-circular furrows. Although spatial variability of soil properties was rather high, the theoretical solutions adequately described cumulative infiltration. The effect of gravity on flow, which is dependent on furrow radius and the ratio of hydraulic conductivity to sorptivity, is not necessarily greatest in soils of high hydraulic conductivity. In most soils gravity effects were pronounced. Qualitative agreement was found between the observed advance of wet fronts and those the theory predicts. Steeper moisture gradients exist near the furrow than would occur near the surface during one-dimensional flow in the same soil. Some factors of relevance to furrow irrigation, and estimation of final infiltration rates from 'short furrow' tests, are discussed.


1997 ◽  
Vol 1 (4) ◽  
pp. 801-811 ◽  
Author(s):  
B. Lennartz ◽  
S. K. Kamra ◽  
S. Meyer-Windel

Abstract. The spatial variability of transport parameters has to be taken into account for a reliable assessment of solute behaviour in natural field soils. Two field sites were studied by collecting 24 and 36 small undisturbed soil columns at an uniform grid of 15 m spacing. Displacement experiments were conducted in these columns with bromide traced water under unsaturated steady state transport conditions. Measured breakthrough curves (BTCs) were evaluated with the simple convective-dispersive equation (CDE). The solute mobility index (MI) calculated as the ratio of measured to fitted pore water velocity and the dispersion coefficient (D) were used to classify bromide breakthrough behaviour. Experimental BTCs were classified into two groups: type I curves expressed classical solute behaviour while type II curves were characterised by the occurrence of a bromide concentration maximum before 0.35 pore volumes of effluent (MI<0.35) resulting from preferential flow conditions. Six columns from site A and 8 from site B were identified as preferential. Frequency distributions of the transport parameters (MI and D) of both sites were either extremely skewed or bimodal. Log-transformation did not lead to a normal distribution in any case. Contour maps of bromide mass flux at certain time steps indicated the clustering of preferential flow regions at both sites. Differences in the extent of preferential flow between sites seemed to be governed by soil structure. Linear cross correlations among transport parameters and independently measured soil properties revealed relations between solute mobility and volumetric soil water content at time of sampling, texture and organic carbon content. The volumetric field soil water content, a simple measure characterising the soil hydraulic behaviour at the sampling location, was found to be a highly sensitive parameter with respect to solute mobility and preferential flow situations. Almost no relation was found between solute transport parameters and independently determined soil properties when non-preferential and preferential samples were considered separately in regression analyses. Future work should concentrate to relate integrated parameters such as the infiltration rate or the soil hydraulic functions to solute mobility under different flow situations.


Sign in / Sign up

Export Citation Format

Share Document