CCS in the North Sea region: A comparison on the cost-effectiveness of storing CO2 in the Utsira formation at regional and national scales

2011 ◽  
Vol 5 (6) ◽  
pp. 1517-1532 ◽  
Author(s):  
Neil Strachan ◽  
Ric Hoefnagels ◽  
Andrea Ramírez ◽  
Machteld van den Broek ◽  
Audun Fidje ◽  
...  
1991 ◽  
Vol 24 (10) ◽  
pp. 269-276
Author(s):  
J. R. Lawrence ◽  
N. C. D. Craig

The public has ever-rising expectations for the environmental quality of the North Sea and hence of everreducing anthropogenic inputs; by implication society must be willing to accept the cost of reduced contamination. The chemical industry accepts that it has an important part to play in meeting these expectations, but it is essential that proper scientific consideration is given to the potential transfer of contamination from one medium to another before changes are made. A strategy for North Sea protection is put forward as a set of seven principles that must govern the management decisions that are made. Some areas of uncertainty are identified as important research targets. It is concluded that although there have been many improvements over the last two decades, there is more to be done. A systematic and less emotive approach is required to continue the improvement process.


2018 ◽  
Author(s):  
Jens N. Sørensen ◽  
Gunner C. Larsen

Abstract. The present work assesses the potential of a massive exploitation of offshore wind power in the North Sea by combining a meteorological model with a cost model that includes a bathymetric analysis of the water depth of the North Sea. The overall objective is to assess if the wind power in the North Sea can deliver the total consumption of electricity in Europe and to what prize as compared to conventional onshore wind energy. The meteorological model is based on the assumption that the exploited area is so large, that the wind field between the turbines is in equilibrium with the atmospheric boundary layer. This makes it possible to use momentum analysis to determine the mutual influence between the atmospheric boundary layer and the wind farm, with the wind farm represented by an average horizontal force component corresponding to the thrust. The cost model includes expressions for the most essential wind farm cost elements, such as costs of wind turbines, support structures, cables and electrical substations, as well as operation and maintenance as function of rotor size, interspatial distance between the turbines, and water depth. The numbers used in the cost model are based on previous experience from offshore wind farms, and is therefore somewhat conservative. The analysis shows that the lowest energy cost is obtained for a configuration of large wind turbines erected with an interspatial distance of about eight rotor diameters. A part of the analysis is devoted to assessing the relative costs of the various elements of the cost model in order to determine the components with the largest potential for reducing the cost price. As an overall finding, it is shown that the power demand of Europe, which is 0.4 TW or about 3500 TWh/year, can be fulfilled by exploiting an area of 190.000 km2, corresponding to about 1/3 of the North Sea, with 100.000 wind turbines of generator size 13 MW on water depths up to 45 m at a cost price of about 7.5 €cents/kWh.


Sign in / Sign up

Export Citation Format

Share Document