Dependence of the blowout limit on flow structure, heat transfer, and pressure loss in a bluff-body micro-combustor

In this paper, heat transfer enhancement and pressure loss penalty for fin-and-tube heat exchangers with rectangular winglet pairs (RWPs) were numerically investigated in a relatively low Reynolds number flow. The purpose of this study was to explore the fundamental mechanism between the local flow structure and the heat transfer augmentation. The RWPs were placed with a special orientation for the purpose of enhancement of heat transfer. The numerical study involved three-dimensional flow and conjugate heat transfer in the computational domain, which was set up to model the entire flow channel in the air flow direction. The effects of attack-angle of RWPs, row-number of RWPs and placement of RWPs on the heat transfer characteristics and flow structure were examined in detail. It was observed that the longitudinal vortices caused by RWPs and the impingement of RWPs-directed flow on the downstream tube were important reasons of heat transfer enhancement for fin-and-tube heat exchangers with RWPs. It was interesting to find that the pressure loss penalty of the fin-and-tube heat exchangers with RWPs could be reduced by altering the placement of the same number of RWPs from inline array to staggered array and simultaneously maintain the heat transfer enhancement level. The results showed that the rectangular winglet pairs (RWPs) can significantly improve the heat transfer performance of the fin-and-tube heat exchangers with a moderate pressure loss penalty.

Download Full-text

Heat Transfer and Turbulent Flow Structure in Channels With Miniature V-Shaped Rib-Dimple Hybrid Structures on One Wall

Journal of Heat Transfer ◽

10.1115/1.4043675 ◽

2019 ◽

Vol 141 (7) ◽

Cited By ~ 1

Author(s):

Peng Zhang ◽

Yu Rao ◽

Yanlin Li ◽

Bernhard Weigand

Keyword(s):

Heat Transfer ◽

Turbulent Flow ◽

Secondary Flow ◽

Flow Structure ◽

Pressure Loss ◽

Numerical Study ◽

Hybrid Structures ◽

Numerical Computations ◽

Turbulent Flow Structure ◽

Near Wall

An experimental and numerical study has been conducted on heat transfer and turbulent flow structure in channels with novel hybrid structures with miniature V-shaped ribs and dimples on one wall. One miniature V-shaped rib was arranged immediately upstream each individual dimple to form the hybrid structure, which aims at inducing additional near-wall secondary flow interacting with the dimple vortex flow and further improving the heat transfer. Steady-state convective heat transfer experiments were done to obtain the heat transfer and pressure loss of the turbulent flow over the surfaces with the miniature V rib-dimples for the Reynolds numbers from 18,700 to 60,000. In addition, the turbulent flow structure in the V rib-dimpled channels has been predicted by carrying out numerical computations. The experimental results indicated that the overall heat transfer enhancement of the miniature V rib-dimpled channels can be increased by up to about 60.0% compared with the counterpart of the dimpled only channel, and by about 23.0% compared with the counterpart of the miniature V ribbed only channel. The miniature V ribs showed appreciable effects on the heat transfer and pressure loss characteristics for the turbulent flow over the V rib-dimpled surfaces. The numerical computations showed that the miniature V rib upstream each dimple produced strong near-wall downwashing secondary flow, which significantly changed the flow patterns and intensified the turbulent flow mixing inside and outside the dimple and above the surrounding wall. These unique near-wall flow characteristics generated a significant heat transfer improvement in both the magnitude and the uniformity.

Download Full-text