Numerical modelling of wrinkled hyperelastic membranes with topologically complex internal boundary conditions

2021 ◽  
Vol 212 ◽  
pp. 106816
Author(s):  
R. Alberini ◽  
A. Spagnoli ◽  
M. Terzano
2016 ◽  
Vol 25 (04) ◽  
pp. 1630011 ◽  
Author(s):  
Alejandro Corichi ◽  
Irais Rubalcava-García ◽  
Tatjana Vukašinac

In this review, we consider first-order gravity in four dimensions. In particular, we focus our attention in formulations where the fundamental variables are a tetrad [Formula: see text] and a [Formula: see text] connection [Formula: see text]. We study the most general action principle compatible with diffeomorphism invariance. This implies, in particular, considering besides the standard Einstein–Hilbert–Palatini term, other terms that either do not change the equations of motion, or are topological in nature. Having a well defined action principle sometimes involves the need for additional boundary terms, whose detailed form may depend on the particular boundary conditions at hand. In this work, we consider spacetimes that include a boundary at infinity, satisfying asymptotically flat boundary conditions and/or an internal boundary satisfying isolated horizons boundary conditions. We focus on the covariant Hamiltonian formalism where the phase space [Formula: see text] is given by solutions to the equations of motion. For each of the possible terms contributing to the action, we consider the well-posedness of the action, its finiteness, the contribution to the symplectic structure, and the Hamiltonian and Noether charges. For the chosen boundary conditions, standard boundary terms warrant a well posed theory. Furthermore, the boundary and topological terms do not contribute to the symplectic structure, nor the Hamiltonian conserved charges. The Noether conserved charges, on the other hand, do depend on such additional terms. The aim of this manuscript is to present a comprehensive and self-contained treatment of the subject, so the style is somewhat pedagogical. Furthermore, along the way, we point out and clarify some issues that have not been clearly understood in the literature.


Author(s):  
Arne E. Holdo̸ ◽  
Govert de With

There are many practical situations when jets are emanating from non-axis-symmetric apertures. The complexities associated to the numerical modelling of a high aspect ratio jet is embedded in its physical complexity. Consequently, the numerical modelling does not only require a high mesh resolution, but furthermore it requires a careful construction of the inlet boundary velocity. The present work consists of a series of Large Eddy Simulation (LES) simulations using different inflow boundary conditions. This work is aimed to find suitable inlet boundary conditions which resemble the turbulent features that can be expected near the jet orifice. The turbulent inlet conditions are constructed by means of a variable velocity. The velocity profile is constructed such that the statistical quantities for turbulence are satisfied, this includes a correct turbulent intensity of the velocity signal and an ‘a priori’ selected frequency spectrum. Experimental work of Quinn et al. (5) is used to validate the computational data.


Author(s):  
Giovanni Pio Pucillo ◽  
Luca Esposito ◽  
Davide Leonetti

The recent increase of train speed and frequency determines a rise of the loads transmitted to the superstructure. Therefore, railway components might experience service loads that have not considered at the design stage. Moreover, wear and backlash modification between components of a mechanical system might be able to modify the internal boundary conditions of the assembly. According to damage tolerance philosophy, an initial flaw is assumed to exist in the fatigue critical location of a structural component, and the analysis of the crack propagation life for such component needs accurate Stress Intensity Factor (SIF) evaluations. In this study, the effects of the boundary conditions on the crack propagation life have been evaluated for a semi-elliptical surface crack having semi-axes a and c and growing from the root of a shoulder fillet notch in a round bar loaded in bending. Two cases have been analyzed: - the shoulder is free from external forces; - the shoulder is in contact with an adjacent generic body. At first, the SIF distribution has been calculated with the Virtual Crack Closure Technique, considering or not the nonlinear effect induced by the contact forces arising from the interaction between the shoulder and the neighboring component. Successively, in both the above cases a two-parameters propagation law has been utilized to predict the evolution of both crack shape and crack depth when a cyclic bending load is applied to the rod. For this purpose, different values of the Stress Concentration Factor at the root of the fillet, and of the initial aspect ratio of the crack front, were considered in the calculations. It is found that the aspect ratio evolves to a unique asymptote, taking or not into account the non-linearity introduced by the contact at the shoulder, and this value depends on the notch severity. The ratio between the dimensionless SIFs obtained with and without the unilateral constraint at the shoulder, βcs / βfs, does not depend on the relative crack depth and crack shape. Also, the effect of the notch severity on the dimensionless SIF appears to be evident only for the portion of the crack front in the vicinity of the free surface.


2019 ◽  
Vol 19 (5) ◽  
pp. 1253-1271 ◽  
Author(s):  
I. Echeverribar ◽  
M. Morales-Hernández ◽  
P. Brufau ◽  
P. García-Navarro

2004 ◽  
Vol 19 (supp02) ◽  
pp. 82-91 ◽  
Author(s):  
P. BOWCOCK ◽  
E. CORRIGAN ◽  
C. ZAMBON

Some ideas and remarks are presented concerning a possible Lagrangian approach to the study of internal boundary conditions relating integrable fields at the junction of two domains. The main example given in the article concerns single real scalar fields in each domain and it is found that these may be free, of Liouville type, or of sinh-Gordon type.


2014 ◽  
Vol 2 (1) ◽  
Author(s):  
Erasmo Viola ◽  
Marco Miniaci ◽  
Nicholas Fantuzzi ◽  
Alessandro Marzani

AbstractThis paper investigates the in-plane free vibrations of multi-stepped and multi-damaged parabolic arches, for various boundary conditions. The axial extension, transverse shear deformation and rotatory inertia effects are taken into account. The constitutive equations relating the stress resultants to the corresponding deformation components refer to an isotropic and linear elastic material. Starting from the kinematic hypothesis for the in-plane displacement of the shear-deformable arch, the equations of motion are deduced by using Hamilton’s principle. Natural frequencies and mode shapes are computed using the Generalized Differential Quadrature (GDQ) method. The variable radius of curvature along the axis of the parabolic arch requires, compared to the circular arch, a more complex formulation and numerical implementation of the motion equations as well as the external and internal boundary conditions. Each damage is modelled as a combination of one rotational and two translational elastic springs. A parametric study is performed to illustrate the influence of the damage parameters on the natural frequencies of parabolic arches for different boundary conditions and cross-sections with localizeddamage.Results for the circular arch, derived from the proposed parabolic model with the derivatives of some parameters set to zero, agree well with those published over the past years.


Sign in / Sign up

Export Citation Format

Share Document