Influence of concrete mix proportions on lifetime flexural load-bearing capacity of RC beams under chloride corrosion of rebars

Structures ◽  
2021 ◽  
Vol 29 ◽  
pp. 2017-2027
Author(s):  
Fatemeh Asen ◽  
Mehdi Dehestani
Keyword(s):  
Bearing Capacity ◽  
Rc Beams ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Chloride Corrosion ◽  
Concrete Mix

Assesment of Main Models for Predicting Debonding Load-Bearing Capacity against Intermediate Crack-Induced Debonding Failure in FRP-Strengthened RC Beams

2011 ◽  
Vol 311-313 ◽  
pp. 1941-1944
Author(s):  
Gui Bing Li ◽  
Yu Gang Guo ◽  
Xiao Yan Sun
Keyword(s):  
Bearing Capacity ◽  
Failure Mode ◽  
Failure Modes ◽  
Rc Beams ◽  
Test Results ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Accuracy Test ◽  
New Models ◽  
Debonding Load

intermediate crack-induced debondingis one of the most dominant failure modes in FRP-strengthened RC beams. Different code models and provisions have been proposed to mitigateintermediate crack-induced debondingfailure.However, these models and provisions can not mitigate this failure mode effectively. Recnetly, new models have been proposed to solve this problem. Out of all the existing models, four typical ones are investigated in the current study. A comprehensivecomparison among these models is carried out in order to evaluate their performance and accuracy. Test results offlexural specimens with intermediate crack-induced debonding failurecollected from the existing literature are used in the current comparison. The effectivenessand accuracy of each model have been evaluated based on these experimental results. It is shown that the current modals are all conservative and inadequite to effectively mitigate intermediate crack-induced debonding in flexurally strengthened members.

scholarly journals Mechanical Properties of Strengthened RC Beams using Steel Plates

2020 ◽  
Vol 9 (4) ◽  
pp. 1208-1217
Keyword(s):  
Mechanical Properties ◽  
Bearing Capacity ◽  
Steel Plate ◽  
Fem Analysis ◽  
Steel Plates ◽  
Rc Beam ◽  
Rc Beams ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Single Row

The focus of this analysis is the review of steel plate strengthened RC beams using Single row and Stagger row bolt arrangements and to compare the bonding behaviour of different bolts arrangement under flexure. Also, to investigate the behaviour, load bearing capacity and the deflection for control and steel plate bonded beams. This research is constrained by FEM analysis utilizing ANSYS to the actions of standard RC Beam and RC beam steel plate associated.

Evaluation of Main Code Models for Predicting Flexural Load-Bearing Capacity against Intermediate Crack-Induced Debonding in FRP-Strengthened RC Beams

2011 ◽  
Vol 71-78 ◽  
pp. 1465-1468
Author(s):  
Gui Bing Li ◽  
Yu Gang Guo ◽  
Xiao Yan Sun
Keyword(s):  
Bearing Capacity ◽  
Failure Modes ◽  
Experimental Results ◽  
Rc Beams ◽  
Test Results ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Accuracy Test ◽  
Comprehensive Comparison ◽  
Code Provisions

Intermediate crack-induced debonding is one of the most dominant failure modes in FRP-strengthened RC beams. Different code models and provisions have been proposed to predict intermediate crack-induced debonding failure. Out of all the existing code provisions and models, four typical ones are investigated in the current study. A comprehensive comparison among these code provisions and models is carried out in order to evaluate their performance and accuracy. Test results of flexural specimens with intermediate crack-induced debonding failure collected from the existing literature are used in the current comparison. The effectiveness and accuracy of each model have been evaluated based on these experimental results. It is shown that the current recommendations are inadequite to effectively mitigate intermediate crack-induced debonding in flexurally strengthened members.

Load-bearing capacity of corroded, patched and FRP-repaired RC beams

2011 ◽  
Vol 63 (11) ◽  
pp. 797-812 ◽  
Author(s):  
Goitseone Malumbela ◽  
Pilate Moyo ◽  
Mark Alexander
Keyword(s):  
Bearing Capacity ◽  
Rc Beams ◽  
Load Bearing Capacity ◽  
Load Bearing

Nonlinear modelling and finite element analysis on the load-bearing capacity of RC beams with considering the bond–slip effect

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Pandimani Pandimani ◽  
Markandeya Raju Ponnada ◽  
Yesuratnam Geddada
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Bearing Capacity ◽  
Experimental Program ◽  
Nonlinear Behaviour ◽  
Rc Beams ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Content Type ◽  
Bond Slip

Purpose This paper aims to present nonlinear numerical simulations using the versatile finite element (FE) analysis tool ANSYS and theoretical analysis based on code provisions to assess the load-carrying capacity of reinforced concrete (RC) beams under two-point monotonic static loadings. Design/methodology/approach Four quarter-size FE models with load and geometry symmetry conditions were constructed, the load-bearing capacity and associated mid-span deflections at critical points are verified against the full-scale experimental RC beams available in the literature. These developed FE models incorporated the tension stiffening effects and bond–slip behaviour. Theoretical analyses based on Indian standard code IS: 456–2000 and ACI 318–19 were also carried to verify the experimental and numerical predicted moments at critical loading points. Findings The load-deflection curves predicted through FE models exhibit closer corroboration with the experimental curves throughout the loading history. The contour plots for deflections, concrete principal stresses, reinforcement yield stresses are satisfactorily predicted by the FE models, which reveal the complete information of nonlinear behaviour of RC beams. The developed model well captured the initial and progressive crack patterns at each load increments. Practical implications The FE modelling is an efficient, valid and economical tool that is an alternative to the expensive experimental program and can be used to explore, analyse and fully understand the nonlinear response of RC beams under static loadings. Originality/value The ultimate moment capacity evaluated based on ACI 318–19 code provision show a better correlation with the experimental data as compared to the IS: 456–2000 code provision. The ultimate loads and associated centre-span deflections predicted by RN-2, RN-3, RB-12 and RB-16 FE model show a discrepancy of 1.66 and –0.49%, –4.68 and –0.60%, –9.38 and –14.53% and –4.37 and 4.21%, respectively, against the experimental results, which reveals that the developed ANSYS FE models predict consistent results and achieved a reasonable agreement with the experimental data.

Increased load bearing capacity of mechanically joined FRP/metal joints using a pin structured auxiliary joining element

2020 ◽  
Vol 62 (1) ◽  
pp. 55-60
Author(s):  
Per Heyser ◽  
Vadim Sartisson ◽  
Gerson Meschut ◽  
Marcel Droß ◽  
Klaus Dröder
Keyword(s):  
Bearing Capacity ◽  
Load Bearing Capacity ◽  
Load Bearing

Load-Bearing Capacity of Direct Inlay-Retained Fibre-reinforced Composite Fixed Partial Dentures with Different Cross-Sectional Pontic Design

2017 ◽  
Vol 68 (1) ◽  
pp. 94-100
Author(s):  
Oana Tanculescu ◽  
Adrian Doloca ◽  
Raluca Maria Vieriu ◽  
Florentina Mocanu ◽  
Gabriela Ifteni ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Fracture Pattern ◽  
Load Bearing Capacity ◽  
Cross Sectional ◽  
Load Bearing ◽  
Reinforced Composite ◽  
Polyethylene Fibre

The load-bearing capacity and fracture pattern of direct inlay-retained FRC FDPs with two different cross-sectional designs of the ponticwere tested. The aim of the study was to evaluate a new fibre disposition. Two types of composites, Filtek Bulk Fill Posterior Restorative and Filtek Z250 (3M/ESPE, St. Paul, MN, USA), and one braided polyethylene fibre, Construct (Kerr, USA) were used. The results of the study suggested that the new tested disposition of the fibres prevented in some extend the delamination of the composite on buccal and facial sides of the pontic and increased the load-bearing capacity of the bridges.

Sign in / Sign up

Export Citation Format

Share Document