Modelling nonlinear behavior of 3D frames using the Force Analogy Method

Structures ◽  
2021 ◽  
Author(s):  
George Bogdan Nica ◽  
Ruben Iacob Munteanu ◽  
Vasile Calofir ◽  
Mihail Iancovici
2018 ◽  
Vol 14 (2) ◽  
pp. 37-49 ◽  
Author(s):  
George Bogdan Nica ◽  
Vasile Calofir ◽  
Ioan Cezar Corâci

Abstract In recent years, the pounding effect during earthquake is a subject of high significance for structural engineers. In this paper, a state space formulation of the equation of motion is used in a MATLAB code. The pounding forces are calculated using nonlinear viscoelastic impact element. The numerical study is performed on SDOF structures subjected by 1940 EL-Centro and 1977 Vrancea N-S recording. While most of the studies available in the literature are related to Newmark implicit time integration method, in this study the equations of motion in state space form are direct integrated. The time domain is chosen instead of the complex one in order to catch the nonlinear behavior of the structures. The physical nonlinear behavior of the structures is modeled according to the Force Analogy Method. The coupling of the Force Analogy Method with the state space approach conducts to an explicit time integration method. Consequently, the collision is easily checked and the pounding forces are taken into account into the equation of motion in an easier manner than in an implicit integration method. A comparison with available data in the literature is presented.


TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 4-11
Author(s):  
MOHAMED CHBEL ◽  
LUC LAPERRIÈRE

Pulp and paper processes frequently present nonlinear behavior, which means that process dynam-ics change with the operating points. These nonlinearities can challenge process control. PID controllers are the most popular controllers because they are simple and robust. However, a fixed set of PID tuning parameters is gen-erally not sufficient to optimize control of the process. Problems related to nonlinearities such as sluggish or oscilla-tory response can arise in different operating regions. Gain scheduling is a potential solution. In processes with mul-tiple control objectives, the control strategy must further evaluate loop interactions to decide on the pairing of manipulated and controlled variables that minimize the effect of such interactions and hence, optimize controller’s performance and stability. Using the CADSIM Plus™ commercial simulation software, we developed a Jacobian sim-ulation module that enables automatic bumps on the manipulated variables to calculate process gains at different operating points. These gains can be used in controller tuning. The module also enables the control system designer to evaluate loop interactions in a multivariable control system by calculating the Relative Gain Array (RGA) matrix, of which the Jacobian is an essential part.


2020 ◽  
Vol 7 (3) ◽  
pp. 11-22
Author(s):  
VALERY ANDREEV ◽  
◽  
ALEXANDER POPOV

A reduced model has been developed to describe the time evolution of a discharge in an iron core tokamak, taking into account the nonlinear behavior of the ferromagnetic during the discharge. The calculation of the discharge scenario and program regime in the tokamak is formulated as an inverse problem - the optimal control problem. The methods for solving the problem are compared and the analysis of the correctness and stability of the control problem is carried out. A model of “quasi-optimal” control is proposed, which allows one to take into account real power sources. The discharge scenarios are calculated for the T-15 tokamak with an iron core.


2018 ◽  
Vol Vol 17 (Vol 17, No 1 (2018)) ◽  
pp. 128-140
Author(s):  
Oleksandr Pushkar

The article deals with the approach to developing an advertising multimedia product for the promotion or sale of goods or services. Under the advertising product is an advertising video, an interactive commercial, 3-D advertising, virtual and augmented reality, an online store. Based on the analogy method, a diagram of the process of perceiving the advertising multimedia product by the user is presented. The use of the hybrid approach of customer development for updating the multimedia product and taking into account the virtual values of users is substantiated. Developed scenarios for the development of a multimedia product, depending on the results of achieving the planned goals. The sequence of multimedia product development is proposed based on the convergence of face-to-face and screen-to-screen approaches.


2020 ◽  
Vol 12 ◽  
Author(s):  
S.V. Kontomaris ◽  
A. Malamou ◽  
A. Stylianou

Background: The determination of the mechanical properties of biological samples using Atomic Force Microscopy (AFM) at the nanoscale is usually performed using basic models arising from the contact mechanics theory. In particular, the Hertz model is the most frequently used theoretical tool for data processing. However, the Hertz model requires several assumptions such as homogeneous and isotropic samples and indenters with perfectly spherical or conical shapes. As it is widely known, none of these requirements are 100 % fulfilled for the case of indentation experiments at the nanoscale. As a result, significant errors arise in the Young’s modulus calculation. At the same time, an analytical model that could account complexities of soft biomaterials, such as nonlinear behavior, anisotropy, and heterogeneity, may be far-reaching. In addition, this hypothetical model would be ‘too difficult’ to be applied in real clinical activities since it would require very heavy workload and highly specialized personnel. Objective: In this paper a simple solution is provided to the aforementioned dead-end. A new approach is introduced in order to provide a simple and accurate method for the mechanical characterization at the nanoscale. Method: The ratio of the work done by the indenter on the sample of interest to the work done by the indenter on a reference sample is introduced as a new physical quantity that does not require homogeneous, isotropic samples or perfect indenters. Results: The proposed approach, not only provides an accurate solution from a physical perspective but also a simpler solution which does not require activities such as the determination of the cantilever’s spring constant and the dimensions of the AFM tip. Conclusion: The proposed, by this opinion paper, solution aims to provide a significant opportunity to overcome the existing limitations provided by Hertzian mechanics and apply AFM techniques in real clinical activities.


Sign in / Sign up

Export Citation Format

Share Document