Characterization of physical mass transport through oil sands fluid fine tailings in an end pit lake: a multi-tracer study

2016 ◽  
Vol 189 ◽  
pp. 12-26 ◽  
Author(s):  
Kathryn A. Dompierre ◽  
S. Lee Barbour
2017 ◽  
Vol 53 (6) ◽  
pp. 4725-4740 ◽  
Author(s):  
Kathryn A. Dompierre ◽  
S. Lee Barbour ◽  
Rebecca L. North ◽  
Sean K. Carey ◽  
Matthew B. J. Lindsay

2016 ◽  
Vol 43 (3) ◽  
pp. 211-217 ◽  
Author(s):  
Gregory A. Lawrence ◽  
Edmund W. Tedford ◽  
Roger Pieters

The production of crude oil from the Canadian oil sands has generated tailings ponds that contain oil sands process-affected water and oil sands fluid fine tailings (FFT). One remediation strategy is to backfill a mined out pit with FFT and cap this with a mix of oil sands process-affected water and fresh water to form a lake, called an end pit lake. Here we discuss various mechanisms governing the vertical mixing of suspended solids in an end pit lake. Depending on the depth of the water cap, wind waves can cause mixing between the water cap and the FFT. Other potential mixing mechanisms include: convection due to salt-water exclusion during ice formation, penetrative convection due to surface cooling, gas emission from the FFT, and internal wave activity. Data collected at Syncrude Canada Limited’s Base Mine Lake in 2013 and 2014 are used to demonstrate the effects of some of these processes.


Author(s):  
Kai Wei ◽  
Heidi L. Cossey ◽  
Ania C. Ulrich

AbstractSurface mining of oil sands ore in Alberta, Canada has generated fluid fine tailings (FFT) that must be reclaimed. End pit lakes (EPLs), which consist of thick deposits of FFT capped with water, have been proposed for FFT reclamation, and Base Mine Lake (BML) is the first full-scale demonstration EPL. However, FFT particle settling and resuspension contributes to high turbidity in the BML water cap, which may be detrimental to the development of an aquatic ecosystem. This study investigated the effect of Ca and Al treatments on turbidity mitigation. The initial turbidity was reduced from 20 NTU to less than 2 NTU in BML surface water treated with 54 mg/L of Ca or 1.1 mg/L of Al. At a concentration of 1.1 mg/L, Al reduced the initial turbidity to a greater extent, and in a shorter time, than 54 mg/L of Ca. Further, resuspended Al-treated FFT particles were 100–700 nm larger in diameter, and thus resettled faster than the resuspended untreated or Ca-treated FFT particles. The final turbidity values 21 days after resuspension of untreated and 1.7 mg/L Al-treated FFT particles in fresh BML surface water were 20.5 NTU and 2.5 NTU, respectively. Thus, Al treatment may be effective in mitigating turbidity in BML through both Al-induced coagulation and self-weight settling of the resuspended Al-treated FFT particles.


2016 ◽  
Vol 556 ◽  
pp. 196-206 ◽  
Author(s):  
Kathryn A. Dompierre ◽  
Matthew B.J. Lindsay ◽  
Pablo Cruz-Hernández ◽  
Geoffrey M. Halferdahl

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1582
Author(s):  
Yeling Zhu ◽  
Yuki Gong ◽  
Heather Kaminsky ◽  
Michael Chae ◽  
Paolo Mussone ◽  
...  

Fluid fine tailings are produced in huge quantities by Canada’s mined oil sands industry. Due to the high colloidal stability of the contained fine solids, settling of fluid fine tailings can take hundreds of years, making the entrapped water unavailable and posing challenges to public health and the environment. This study focuses on developing value-added aggregation agents from specified risk materials (SRM), a waste protein stream from slaughterhouse industries, to achieve an improved separation of fluid fine tailings into free water and solids. Settling results using synthetic kaolinite slurries demonstrated that, though not as effective as hydrolyzed polyacrylamide, a commercial flocculant, the use of SRM-derived peptides enabled a 2-3-fold faster initial settling rate than the blank control. The pH of synthetic kaolinite tailings was observed to be slightly reduced with increasing peptides dosage in the test range (10–50 kg/ton). The experiments on diluted fluid fine tailings (as a representation of real oil sands tailings) demonstrated an optimum peptides dosage of 14 kg/ton, which resulted in a 4-fold faster initial settling rate compared to the untreated tailings. Overall, this study demonstrates the novelty and feasibility of using SRM-peptides to address intractable oil sands fluid tailings.


2013 ◽  
Vol 50 (9) ◽  
pp. 1001-1007 ◽  
Author(s):  
Nicholas Beier ◽  
Ward Wilson ◽  
Adedeji Dunmola ◽  
David Sego

The oil sands in northern Alberta have been mined to produce bitumen over the past five decades. Since the 1980s, technical advances have been made in mining, material handling, and bitumen extraction. However, acquiring practical methods to control and reduce the fluid fine tailings build-up has been an ongoing challenge. Recent regulatory changes have driven the industry to review current tailings-management techniques and investigate numerous alternative technologies and processes to manage and reclaim fine tailings. Many of these fine tailings–management techniques involve some form of polymer or chemical addition to promote dewatering and strength gain to meet the regulatory requirements. Based on the reported data, the chemically amended fine tailings deposits have the characteristics of sensitive, metastable deposits, necessitating additional mitigative measures by oil sands operators beyond the regulatory requirements. This paper explores the geotechnical aspects of meeting regulatory strength performance criteria by employing flocculation-based dewatering of fluid fine tailings.


2016 ◽  
Vol 43 (12) ◽  
pp. 1025-1033 ◽  
Author(s):  
Xiaojuan Yang ◽  
Miguel de Lucas Pardo ◽  
Maria Ibanez ◽  
Lijun Deng ◽  
Luca Sittoni ◽  
...  

Accelerating dewatering of fluid fine tailings (FFT) to facilitate land reclamation is a major challenge to the oil sands industry in Canada. A new method was tested, addition of Tubifex to FFT. Tubifex is an indigenous earthworm in Canada. The survival rate tests showed that Tubifex can survive in oil sands tailings and penetrate to 42 cm depth (maximum depth tested). Columns (5 L of FFT) were set-up with tailings alone, Tubifex treated tailings and polymer-Tubifex treated tailings. Test results showed that (a) the final mud–water interface of tailings alone was 26% higher than that of Tubifex treated tailings; (b) solids content of Tubifex treated tailings was 21% more than that of tailings alone; (c) Tubifex was capable to accelerate the dewatering process of both cationic and anionic polymer treated tailings; (d) anionic polymer was superior in facilitating long-term dewatering and its coupled effects with Tubifex were better than the cationic polymer.


2018 ◽  
Vol 55 (8) ◽  
pp. 1059-1066 ◽  
Author(s):  
G. Ward Wilson ◽  
Louis K. Kabwe ◽  
Nicholas A. Beier ◽  
J. Don Scott

Regulatory policy and regulations in Alberta require oil sands companies to reduce their production and storage of fluid fine tailings by creating deposits that can be reclaimed in a timely manner. To meet the regulatory requirements, some companies are adding flocculants to the fluid fine tailings and then using thickeners, inline flocculation or centrifuges to increase the solids content. Freeze–thaw and drying processes are then used to further dewater the tailings. The effects of flocculating, thickening, and freeze–thaw treatments were investigated by performing large-strain consolidation and shear strength tests on these treated fluid fine tailings. The consolidation and shear strength results were then compared with those of untreated fluid fine tailings. All of the treatments increased the hydraulic conductivity of the fluid fine tailings to some degree, but had little to no effect on the compressibility and shear strength. The effects of the treatment processes are discussed and evaluated.


2017 ◽  
Vol 74 (2) ◽  
pp. 362-372 ◽  
Author(s):  
Danielle VanMensel ◽  
Subba Rao Chaganti ◽  
Ryan Boudens ◽  
Thomas Reid ◽  
Jan Ciborowski ◽  
...  

2017 ◽  
Vol 54 (3) ◽  
pp. 428-440 ◽  
Author(s):  
Kathryn A. Dompierre ◽  
S. Lee Barbour

Fluid fine tailings (FFT) are soft tailings produced by the bitumen extraction process associated with open-pit oil sands mining. Oil sands mine operators have proposed the use of end pit lakes (EPLs) to contain soft tailings and Syncrude Canada Ltd. has developed the first EPL in the industry. This EPL, referred to as Base Mine Lake, contains FFT transferred from an above-ground tailings facility in a mined-out pit. The FFT was placed at elevated temperatures relative to natural groundwater temperatures in the region, so the FFT will act as a long-term source of heat. Evaluation of the thermal regime within the EPL requires the characterization of the thermal properties of FFT. Laboratory testing was undertaken to measure the thermal properties (thermal conductivity and volumetric heat capacity) of the FFT over a range of water contents and to evaluate the effect of bitumen content on the thermal properties. Field testing was also undertaken to verify that these properties were similar in the undisturbed FFT, measured at a larger scale.


Sign in / Sign up

Export Citation Format

Share Document