Common artifacts on analytical electron microscope (AEM) specimens prepared from bulk materials are surface films with altered structure and composition that result from electropolishing, oxidation, hydrocarbon contamination, or ion milling (preferential sputtering or deposition of sputtered specimen or support material). Of course, the best solution for surface films is to avoid them by improved specimen preparation and handling procedures or to remove them by low energy ion sputter cleaning, a capability that already exists on some specialized AEMs and one that is likely to become increasingly common. However, the problem remains and it is surprising that surface films have not received more attention with respect to composition determination by energy dispersive X-ray spectrometry (EDS) and electron energy loss spectrometry (EELS).For EDS, an effective first-order correction to remove the contribution of surface films on wedge shaped specimens is to subtract from the spectrum of interest a spectrum obtained under identical conditions (probe current, diffracting conditions, acquisition live time) from a thinner region of the specimen.
