Synthesis of AlOOH slurry catalyst and catalytic activity for methanol dehydration to dimethyl ether

2012 ◽  
Vol 18 (1) ◽  
pp. 123-127 ◽  
Author(s):  
Lei Liu ◽  
Wei Huang ◽  
Zhi-hua Gao ◽  
Li-hua Yin
2015 ◽  
Vol 1085 ◽  
pp. 29-33
Author(s):  
Natalia I. Kosova ◽  
Olga Yu. Vodorezova ◽  
Irina A. Kurzina ◽  
Larisa N. Kurina ◽  
Veronica M. Vorobeva ◽  
...  

Cuprum-zinc catalysts with chrome and zirconium additives were obtained by continuous codeposition within this study. XRD showed the presence of cuprum, zinc, chrome, and zirconium oxides phases. Catalytic activity was studied under the mixed loading with HZSM-5 zeolite as a catalyst for methanol dehydration during the STD-process reaction. TPR method was used to show that the reduction of catalysts takes place up to 350 °С. The maximum СО conversion value for sample CuZnAl amounts to 60 %, for sample CuZnAlСr - 83 %, and for sample CuZnAlZr it is 68 %. DME yield amounted to 18 % at a temperature of 240 °С for sample CuZnAl, for CuZnAlZr – 15 % (Т=240 °С), and for CuZnAl – 11 % at 220 °С.


2020 ◽  
Vol 6 ◽  
pp. 469-473
Author(s):  
Imran Rosadi ◽  
Pakpoom Athikaphan ◽  
Phatchareephon Chantanachat ◽  
Arthit Neramittagapong ◽  
Sutasinee Neramittagapong

Author(s):  
Alexey Zhokh ◽  
Andrii Trypolskyi ◽  
Valentina Gritsenko ◽  
Peter E. Strizhak

A series of H-ZSM-5/Al2O3 molded catalysts with various zeolite/alumina ratios has been prepared and their catalytic activity in the methanol dehydration to dimethyl ether has been studied. Based on Langmuir-Hinshelwood...


Author(s):  
Seyyed Ya'ghoob Hosseini ◽  
Mohammad Reza Khosravi Nikou

Abstract A simple co-precipitation method was utilized to synthesize γ-Al2O3 catalysts using aluminum nitrate nonahydrate as the source of aluminum cations for methanol dehydration to dimethyl ether (DME). Different precipitating agents comprising ammonium carbonate, ammonium bicarbonate and ammonia solutions were used for preparation of the samples. The catalysts were characterized by XRD, FTIR, SEM, NH3-TPD and N2 adsorption-desorption techniques. The sample prepared by ammonia solution had the highest acidity among the synthesized catalysts. Also, N2 adsorption-desorption results showed suitable textural properties for all of the synthesized samples. Vapor phase dehydration of methanol to DME was performed in the fixed bed micro reactor over the synthesized catalysts and commercial one for comparison purposes. The effects of different characteristics of catalysts such as surface area, acidity, sintering factor and temperature as an operating parameter on performance of catalysts were investigated. The catalyst prepared by ammonia solution showed best catalytic activity due to the suitable textural properties and high amount of acidic sites. Also, the results showed that only high acid strength can’t result high yield of DME for a solid acid catalyst.


Sign in / Sign up

Export Citation Format

Share Document