Oxidative chemical depolymerization of thermoset epoxy resin for green recycling

2021 ◽  
Vol 96 ◽  
pp. 76-81
Author(s):  
Doo Hun Kim ◽  
Ayeong Yu ◽  
Munju Goh
Keyword(s):  
Epoxy Resin ◽  
Thermoset Epoxy

Thermoset Composite on Basis of Recycled Rubber

2013 ◽  
Vol 801 ◽  
pp. 67-73 ◽  
Author(s):  
Petr Valášek ◽  
Jozef Žarnovský ◽  
Miroslav Müller
Keyword(s):  
Epoxy Resin ◽  
Adhesive Properties ◽  
Micro Particles ◽  
Material Usage ◽  
Limited Company ◽  
Recycled Rubber ◽  
Thermoset Epoxy ◽  
Waste Handling

The paper describes the mechanical qualities of thermoset – epoxy resin filled with recycled rubber in the form of micro-particles. Such an application of waste can be regarded as material usage which should be preferred to other ways of waste handling. Micro-particles of recycled rubber affect the mechanical qualities of polymer in which they are dispersed. The paper quantifies cohesive and adhesive properties of the filled epoxy resin. Filling polymers – thermosets with waste fillers saves costs, it does not burden the environment, and it is inexpensive. The results described in this paper can lead to enlarging the application areas of recycled rubbers. As the filler, recycled rubber gained by the process of an ecological disposal of tyres by Gumoeko, s.r.o. (private limited company) was used.

High-strain rate compressive behavior of multi-walled carbon nanotube dispersed thermoset epoxy resin

2014 ◽  
Vol 49 (8) ◽  
pp. 903-910 ◽  
Author(s):  
Niranjan K Naik ◽  
Kedar S Pandya ◽  
Venkateswara R Kavala ◽  
Wei Zhang ◽  
Nikhil A Koratkar
Keyword(s):  
Carbon Nanotube ◽  
High Strain Rate ◽  
Strain Rate ◽  
Epoxy Resin ◽  
High Strain ◽  
Compressive Behavior ◽  
Multi Walled Carbon Nanotube ◽  
Thermoset Epoxy

Prediction of statistical life time for unidirectional CFRTP under cyclic loading

2021 ◽  
pp. 073168442110055
Author(s):  
Masayuki Nakada ◽  
Yasushi Miyano ◽  
Soshi Kageta ◽  
Hirofumi Nishida ◽  
Yutaka Hayashi ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Epoxy Resin ◽  
Elevated Temperatures ◽  
Constant Strain Rate ◽  
Life Time ◽  
Fiber Reinforced ◽  
Statistical Life ◽  
The Matrix ◽  
Carbon Fiber Reinforced ◽  
Thermoset Epoxy

Recently, the Innovative Composite Center of Kanazawa Institute of Technology developed a thermoplastic epoxy resin (TP-EP). Resin-impregnated carbon fiber reinforced TP-EP (CF/TP) strands molded by pultrusion were developed by Komatsu Matere Co., Ltd., for use as tension rods. This study examines the prediction of the statistical life time for these developed CF/TP strands under cyclic tension loading with comparison to our earlier report of similar predictions for carbon fiber reinforced thermoset epoxy resin (CF/TS) strands having a thermoset epoxy resin (TS-EP) as a matrix. First, test methods for static and fatigue strengths at elevated temperatures were developed for CF/TP strands. Second, static and fatigue tensile strengths of CF/TP strands were measured statistically at various constant temperatures under a constant strain rate and frequency. The master curves of statistical fatigue tensile strengths for CF/TP strands were constructed by substituting the measured data into the formulations of these strengths based on the matrix resin viscoelasticity. The fatigue strength characteristics of CF/TP strands were discussed through comparison to those of CF/TS strands with thermosetting epoxy resin as the matrix.

scholarly journals Recycling Thermoset Epoxy Resin Using Alkyl-Methyl-Imidazolium Ionic Liquids as Green Solvents

2021 ◽  
Author(s):  
Rocío L. Pérez ◽  
Caitlan E. Ayala ◽  
Michelle M. Opiri ◽  
Abdulrahman Ezzir ◽  
Guoqiang Li ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Epoxy Resin ◽  
Green Solvents ◽  
Imidazolium Ionic Liquids ◽  
Thermoset Epoxy

scholarly journals Co-curing behaviour of thermoset composites with a thermoplastic boundary layer for welding purposes

2020 ◽  
Vol 29 ◽  
pp. 2633366X2090277
Author(s):  
Christian Brauner ◽  
Sawsane Nakouzi ◽  
Lucian Zweifel ◽  
Jens Tresch
Keyword(s):  
Boundary Layer ◽  
Epoxy Resin ◽  
Primary Objective ◽  
Structural Components ◽  
Thermoplastic Material ◽  
Lap Shear Strength ◽  
Thermoset Composites ◽  
Lap Shear ◽  
Reinforced Composite ◽  
Thermoset Epoxy

The primary objective of this study is to determine the interphase behaviour of a thermoset epoxy resin that is commercially used for carbon fibre–reinforced composite materials in aerospace structures and a suitable thermoplastic material that can be used as a boundary layer. The thermoplastic boundary layer will be used for welding purposes to join structural components with a fraction of the effort compared to conventional gluing processes. In this study, the interphase formation of an epoxy resin with several thermoplastic materials, namely, polyetheretherketone, polyvinylidenfluoride, polyphenylensulfide and polyetherimide (PEI), is studied via hot-stage microscope experiments. Based on this study, PEI was selected, and a detailed study was performed to determine the dependency of dissolution, diffusion and phase separation mechanisms under various isothermal conditions. Additionally, the welding behaviour was investigated by a resistance welding rig whereby the process parameters were statistically varied to optimize the lap shear strength. The results of this study will enable a statement about the interphase development, the morphology and the mechanical properties which is a key element of fully understanding the process.

Enhancing the mechanical and thermal properties of waterborne polyurethane composites with thermoset epoxy resin microspheres

2020 ◽  
Vol 44 (23) ◽  
pp. 9896-9902
Author(s):  
Liming Cheng ◽  
Nianqing Zhu ◽  
Zhongbin Ni ◽  
Jin Xu ◽  
Xiangmiao Zhu ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Epoxy Resin ◽  
Waterborne Polyurethane ◽  
Mechanical And Thermal Properties ◽  
Resin Microspheres ◽  
Thermoset Epoxy ◽  
Polyurethane Composites

A facile way to prepare WPU with good mechanical and thermal properties by adding epoxy microspheres.

Sign in / Sign up

Export Citation Format

Share Document