Quantification of the hardness response in the heat-affected zone of low alloy steels subjected to temper bead welding

2021 ◽  
Vol 66 ◽  
pp. 325-340
Author(s):  
Jeffrey Stewart ◽  
Boian Alexandrov
Keyword(s):  
Heat Affected Zone ◽  
Low Alloy Steels ◽  
Alloy Steels ◽  
Hardness Response

Recent Aspects on the Effect of Inclusion Characteristics on the Intragranular Ferrite Formation in Low Alloy Steels: A Review

2017 ◽  
Vol 36 (4) ◽  
pp. 309-325 ◽  
Author(s):  
Wangzhong Mu ◽  
Pär Göran Jönsson ◽  
Keiji Nakajima
Keyword(s):  
Heat Affected Zone ◽  
Low Alloy Steels ◽  
Low Carbon ◽  
Intragranular Ferrite ◽  
Metallic Inclusions ◽  
Theoretical Investigations ◽  
Alloy Steels ◽  
Institute Of Technology ◽  
Future Work

AbstractIntragranular ferrite (IGF), which nucleates from specific inclusion surfaces in low alloy steels, is the desired microstructure to improve mechanical properties of steel such as the toughness. This microstructure is especially important in the coarse grain heat affected zone (CGHAZ) of weldments. The latest review paper focusing on the role of non-metallic inclusions in the IGF formation in steels has been reported by Sarma et al. in 2009 (ISIJ int., 49(2009), 1063–1074). In recent years, large amount of papers have been presented to investigate different issues of this topic. This paper mainly highlights the frontiers of experimental and theoretical investigations on the effects of inclusion characteristics, such as the composition, size distribution and number density, on the IGF formation in low carbon low-alloyed steels, undertaken by the group of Applied Process Metallurgy, KTH Royal Institute of Technology. Related results reported in previous studies are also introduced. Also, plausible future work regarding various items of IGF formation is mentioned in each section. This work aims to give a better control of improving the steel quality during casting and in the heat affected zone (HAZ) of weldment, according to the concept of oxide metallurgy.

The critical influence of La content on the microstructure-toughness relationship in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels

2021 ◽  
Vol 118 (2) ◽  
pp. 212
Author(s):  
Yuxin Cao ◽  
Xiangliang Wan ◽  
Feng Zhou ◽  
Hangyu Dong ◽  
Kaiming Wu ◽  
...  
Keyword(s):  
Heat Affected Zone ◽  
Acicular Ferrite ◽  
High Strength ◽  
Coarse Grained ◽  
Low Alloy Steels ◽  
Fine Grained ◽  
Welding Thermal Cycle ◽  
Alloy Steels ◽  
High Fraction ◽  
The Impact

The present study was envisaged to investigate the role of La content on the particle, microstructure and toughness in the simulated coarse-grained heat-affected zone (CGHAZ) of high-strength low-alloy steels. Three steels with La content of 0.016 wt.%, 0.046 wt.% and 0.093 wt.% were prepared and simulated in a 100 kJ/cm heat input welding thermal cycle. Subsequently, the particle and microstructure of selected specimens were characterized and the impact absorb energy was measured at −20 °C. The results indicated that the La2O2S inclusions in 0.016 wt.%-La steel were gradually modified to LaS-LaP in 0.046 wt.%-La steel and to LaP in 0.093 wt.%-La steel. A higher fraction of acicular ferrite was obtained in the simulated CGHAZ of 0.016 wt.%-La steel, since the inclusion of La2O2S was more powerful to induce the formation of acicular ferrite. Furthermore, the fraction of M-A constituents in the simulated CGHAZ increased with increasing La content. The impact toughness in the simulated CGHAZ of 0.016 wt.%-La steel was the highest, owing to the high fraction of the fine-grained acicular ferrite and low fraction of M-A constituent.

Impact of Mo content on the microstructure– toughness relationship in the coarse-grained heat-affected zone of high-strength low-alloy steels

2021 ◽  
Vol 112 (2) ◽  
pp. 98-107
Author(s):  
Yuxin Cao ◽  
Xiangliang Wan ◽  
Feng Zhou ◽  
Yu Shen ◽  
Yu Liu ◽  
...  
Keyword(s):  
Heat Affected Zone ◽  
Prior Austenite ◽  
High Strength ◽  
Coarse Grained ◽  
Low Alloy Steels ◽  
Austenite Grain ◽  
Alloy Steels ◽  
Mo Content ◽  
Grain Boundary Pinning ◽  
Prior Austenite Grain

Abstract The present study elucidates the influence of Mo content on the microstructure – toughness relationship in the coarsegrained heat-affected zone of high-strength low-alloy steels. The low-Mo and high-Mo steels were subjected to 100 kJ cm–1 heat input welding thermal cycling. The results indicated that (Ti,Mo)-carbonitrides were formed in high-Mo steel, whereas (Ti,Nb)-carbonitrides were formed in low-Mo steel. The finer and dispersed precipitates in high-Mo steel refined the prior austenite grain in the coarse-grained heat-affected zone based on the grain boundary pinning effect. However, the smaller prior austenite grain and excessive Mo content induced the formation of an entirely bainitic microstructure in high-Mo steel. Furthermore, a higher fraction of martensite –austenite constituents was observed in high-Mo steel. These results could be responsible for the deterioration of the toughness in the coarse-grained heat-affected zone of high-Mo steel.

scholarly journals DIFFUSION OF HYDROGEN IN WELDED JOINTS OF STRUCTURAL STEELS

2017 ◽  
Vol 21 (6) ◽  
pp. 85-95 ◽  
Author(s):  
N. N. Sergeev ◽  
A. N. Sergeev ◽  
S. N. Kutepov ◽  
A. E. Gvozdev ◽  
E. V. Ageev
Keyword(s):  
Diffusion Coefficient ◽  
Weld Metal ◽  
Heat Affected Zone ◽  
Welded Joints ◽  
Chemical Potential ◽  
Weld Zone ◽  
Base Material ◽  
High Strength ◽  
Low Alloy Steels ◽  
Alloy Steels

High-strength low-alloy steels are widely used in the construction of welded metal structures. The main advantage of these steels is good combination of strength and toughness, and weldability. However, when welding high strength low alloy steels during cooling of the weld to a temperature below 150-100 °C there may be a risk of formation of bulk crystal structures defects in the weld zone - cold cracks. It was experimentally established that one of the factors contributing to the formation of cold cracks may be the occlusion of hydrogen in the atmosphere of arc plasma in the solidifying weld metal, from which diffusion hydrogen may diffuse to different areas of the weld after cooling. Hydrogen cracking typically has a tendency to slow down i.e. cracks can occur several days after the completion of welding process. As a rule, hydrogen induced cracking occurs either in the original steel in the heat-affected zone or in the weld metal, which is important, topical and long been researched by various scientific schools. Modern technologies of high strength low alloy steels processing have significantly improved the quality of the base material by reducing the amount of carbon and impurities, which has increased the stability of weld in the heat affected zone (HAZ) to hydrogen induced cold cracking. The paper presents modern approaches to the definition of diffusion coefficient of hydrogen in welded joints of high-strength low-alloy steels. Taking into account the temperature, the gradient of chemical potential and continuity conditions there has been considered the process of mass transfer of hydrogen under the influence of diffuse inhomogeneous mediums. It has been shown that the local effects of changing pressure and chemical potential are described using the equation of generalized potential of the diffusing substance. Our paper presents analytical expressions to determine the apparent diffusion coefficient of hydrogen in different local areas of a welded joint depending on temperature.

Sign in / Sign up

Export Citation Format

Share Document