Unravelling the mysteries of gas phase photocatalytic reaction pathways by studying the catalyst surface: A literature review of different Fourier transform infrared spectroscopic reaction cells used in the field

Author(s):  
Birger Hauchecorne ◽  
Silvia Lenaerts
Author(s):  
Yudong Li ◽  
Jingkai Jiang ◽  
Michael Hinshelwood ◽  
Shiqiang Zhang ◽  
Peter Bruggeman ◽  
...  

Abstract In this work, we investigated atmospheric pressure plasma jet (APPJ)-assisted methane oxidation over a Ni-SiO2/Al2O3 catalyst. We evaluated possible reaction mechanisms by analyzing the correlation of gas phase, surface and plasma-produced species. Plasma feed gas compositions, plasma powers, and catalyst temperatures were varied to expand the experimental parameters. Real-time Fourier-transform infrared spectroscopy (FTIR) was applied to quantify gas phase species from the reactions. The reactive incident fluxes generated by plasma were measured by molecular beam mass spectroscopy (MBMS) using an identical APPJ operating at the same conditions. A strong correlation of the quantified fluxes of plasma-produced atomic oxygen with that of CH4 consumption, and CO and CO2 formation implies that O atoms play an essential role in CH4 oxidation for the investigated conditions. With the integration of APPJ, the apparent activation energy was lowered and a synergistic effect of 30% was observed. We also performed in-situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) to analyze the catalyst surface. The surface analysis showed that surface CO abundance mirrored the surface coverage of CHn at 25 oC. This suggests that CHn adsorbed on the catalyst surface as an intermediate species that was subsequently transformed into surface CO. We observed very little surface CHn absorbance at 500 oC, while a ten-fold increase of surface CO and stronger CO2 absorption were seen. This indicates that for a nickel catalyst at 500 oC, the dissociation of CH4 to CHn may be the rate-determining step in the plasma-assisted CH4 oxidation for our conditions. We also found the CO vibrational frequency changes from 2143 cm-1 for gas phase CO to 2196 cm-1 for CO on a 25 oC catalyst surface, whereas the frequency of CO on a 500 oC catalyst was 2188 cm-1. The change in CO vibrational frequency may be related to the oxidation of the catalyst.


Sign in / Sign up

Export Citation Format

Share Document