Stir zone anisotropic work hardening behavior in friction stir processed EN8 medium carbon steel

2020 ◽  
pp. 140582
Author(s):  
Md Anwar Ali Anshari ◽  
Murshid Imam ◽  
Mohd Zaheer Khan Yusufzai ◽  
Viswanath Chinthapenta ◽  
Rajnish Mishra
Keyword(s):  
Carbon Steel ◽  
Work Hardening ◽  
Medium Carbon Steel ◽  
Stir Zone ◽  
Medium Carbon ◽  
Work Hardening Behavior ◽  
Friction Stir ◽  
Hardening Behavior

Surface Modification of Steels Using Friction Stir Surfacing

2012 ◽  
Vol 710 ◽  
pp. 258-263 ◽  
Author(s):  
S. Janakiraman ◽  
Jayachandra Reddy ◽  
Satish V. Kailash ◽  
K. Udaya Bhat
Keyword(s):  
Surface Modification ◽  
Carbon Steel ◽  
Rotation Speed ◽  
Normal Load ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Open Atmosphere ◽  
Friction Stir ◽  
Tool Rotation

Friction stir surfacing is done to deposit commercial pure Al on medium carbon steel under open atmosphere conditions. Roughness of the substrate, normal load and tool rotation are the variables. Deposition is analysed with respect to continuity, width, composition and phase parameters. Good deposition is observed under a limited set of load and rotation speed. The deposit contains a mixture of steel and aluminium particles.

scholarly journals Linear Friction Stir Welding of Medium Carbon Steel at Low Temperature

2019 ◽  
Vol 59 (10) ◽  
pp. 1853-1859 ◽  
Author(s):  
Yasuhiro Aoki ◽  
Ryosuke Kuroiwa ◽  
Hidetoshi Fujii ◽  
Gen Murayama ◽  
Masanori Yasuyama
Keyword(s):  
Friction Stir Welding ◽  
Carbon Steel ◽  
Low Temperature ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Friction Stir ◽  
Linear Friction

scholarly journals Effects of Solute Carbon on the Work Hardening Behavior of Lath Martensite in Low-Carbon Steel

2020 ◽  
Vol 106 (7) ◽  
pp. 488-496
Author(s):  
Taku Niino ◽  
Junya Inoue ◽  
Mayumi Ojima ◽  
Shoichi Nambu ◽  
Toshihiko Koseki
Keyword(s):  
Carbon Steel ◽  
Work Hardening ◽  
Lath Martensite ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Work Hardening Behavior ◽  
Hardening Behavior ◽  
Solute Carbon

scholarly journals Friction Stir Welding of Medium Carbon Steel with Laser-Preheating

2020 ◽  
Vol 60 (1) ◽  
pp. 153-159
Author(s):  
Takuya Wada ◽  
Yoshiaki Morisada ◽  
Yufeng Sun ◽  
Hidetoshi Fujii ◽  
Yousuke Kawahito ◽  
...  
Keyword(s):  
Friction Stir Welding ◽  
Carbon Steel ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Friction Stir

Residual stresses and wear properties of induction-hardened medium carbon steel

2019 ◽  
Vol 233 (10) ◽  
pp. 1554-1564
Author(s):  
QC Liu ◽  
YJ Cao ◽  
JQ Sun ◽  
QK He ◽  
YL Tan ◽  
...  
Keyword(s):  
Residual Stress ◽  
Carbon Steel ◽  
Work Hardening ◽  
Medium Carbon Steel ◽  
Dry Sliding Wear ◽  
Wear Properties ◽  
Medium Carbon ◽  
Delamination Wear ◽  
Worn Surface ◽  
Deformation Layer

A systematic experimental investigation was performed to study the residual stress, microstructure and work hardening on the wear properties of induction-hardened medium carbon steel. The dry sliding wear tests were performed using a reciprocating ball-on-flat apparatus under normal loads of 20, 50, and 100 N against ceramic ball counterface, respectively. The wear mechanism was mainly abrasive wear at low load (20 N) and delamination wear at higher load (100 N) as evidenced by the worn surface topography and wear debris. The deformation layer generated by friction work hardening reduced the friction coefficient, exhibited better antifriction. Typically, the high compressive residual stress could improve the wear resistance by delaying the propagation of microcrack and inhibiting the delamination.

Sign in / Sign up

Export Citation Format

Share Document