Uncertainty analysis of hydroelastic responses and wave loads for different structural modeling and potential methods

2021 ◽  
Vol 222 ◽  
pp. 108529
Author(s):  
Peng Yang ◽  
Wei Zhang ◽  
Xueliang Wang ◽  
Juan Jiang ◽  
Jiajun Hu ◽  
...  
Author(s):  
Andrew S. Zurkinden ◽  
Lars Damkilde ◽  
Zhen Gao ◽  
Torgeir Moan

This paper deals with structural modeling and analysis of a wave energy converter. The device, called Wavestar, is a bottom fixed structure, located in a shallow water environment at the Danish Northwest coast. The analysis is concentrated on a single float and its structural arm which connects the WEC to a jackup structure. The wave energy converter is characterized by having an operational and survival mode. The survival mode drastically reduces the exposure to waves and therfore to the wave loads. Structural response analysis of the Wavestar arm is carried out in this study. Due to the relative stiff behavior of the arm the calculation can be reduced to a quasi-static analysis. The hydrodynamic and the structural analyses are thus performed separately. In order to reduce the computational time of the finite element calculation the main structure is modeled as a superelement. The structural detail, where the stress analysis is carried out, is connected with the superstructure by interface nodes. The analysis is conducted for two different control situations. Numerical results will be presented which can be further used to carry out fatigue analysis in which a more refined FE model is required to obtain the stress concentration factors.


2014 ◽  
Vol 2014 ◽  
pp. 1-14
Author(s):  
M. R. Ball ◽  
C. McEwan ◽  
D. R. Novog ◽  
J. C. Luxat

The propagation of nuclear data uncertainties through reactor physics calculation has received attention through the Organization for Economic Cooperation and Development—Nuclear Energy Agency’s Uncertainty Analysis in Modelling (UAM) benchmark. A common strategy for performing lattice physics uncertainty analysis involves starting with nuclear data and covariance matrix which is typically available at infinite dilution. To describe the uncertainty of all multigroup physics parameters—including those at finite dilution—additional calculations must be performed that relate uncertainties in an infinite dilution cross-section to those at the problem dilution. Two potential methods for propagating dilution-related uncertainties were studied in this work. The first assumed a correlation between continuous-energy and multigroup cross-sectional data and uncertainties, which is convenient for direct implementation in lattice physics codes. The second is based on a more rigorous approach involving the Monte Carlo sampling of resonance parameters in evaluated nuclear data using the TALYS software. When applied to a light water fuel cell, the two approaches show significant differences, indicating that the assumption of the first method did not capture the complexity of physics parameter data uncertainties. It was found that the covariance of problem-dilution multigroup parameters for selected neutron cross-sections can vary significantly from their infinite-dilution counterparts.


2020 ◽  
Vol 477 (2) ◽  
pp. 459-459
Author(s):  
Lalith K. Chaganti ◽  
Shubhankar Dutta ◽  
Raja Reddy Kuppili ◽  
Mriganka Mandal ◽  
Kakoli Bose

Author(s):  
Svetlana L. Sazanova

Entrepreneurship plays an important role in the modern global economy; the share of products of small and medium enterprises in the gross product and exports not only of the developed but also of developing countries is growing. Innovation processes cover all sectors of the economy, and more and more people are involved in entrepreneurial activity, which contributes to the penetration of entrepreneurial thinking and business values in all areas of the socioeconomic life of society. The Institute of Entrepreneurship plays an increasingly prominent role in the institutional environment of socio-economic systems. This actualizes the problem of studying the relationship of the institution of entrepreneurship with the institutions of law, culture, management. This requires a methodology that allows you to explore the impact on the institute of entrepreneurship not only economic, but also non-economic factors. The methodology of the “old” institutionalism possesses such a tool, it is structural modeling (pattern modeling), which allows to explore the diversity of interrelationships of the institution of entrepreneurship with other components of the institutional and economic environment. The article explored the features of the development of the institution of entrepreneurship in Russia, established the relationship between the institution of entrepreneurship, values, motives and incentives for entrepreneurial activity, built a structural model of the institution of entrepreneurship based on the methodology of the old institutionalism (pattern modeling). The structural model of the institution of entrepreneurship reveals the relationship between the institution of entrepreneurship, the values of entrepreneurial activity, its motives and incentives; as well as the relationship between the institution of entrepreneurship with the institutions of governance, cultural and religious institutions, legal institutions and society.


2014 ◽  
Author(s):  
M Bambang Ontowiryo ◽  
Akbar Kurniawan ◽  
Lalang Jati Sardinda ◽  
Suderajat Suderajat ◽  
Jati Priyantoro ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document