Mechanical and rheological properties of natural rubber compounds containing devulcanized ground tire rubber from several methods

2015 ◽  
Vol 121 ◽  
pp. 369-377 ◽  
Author(s):  
Ivan Mangili ◽  
Marina Lasagni ◽  
Manuela Anzano ◽  
Elena Collina ◽  
Valeria Tatangelo ◽  
...  
2020 ◽  
Vol 4 (3) ◽  
pp. 103 ◽  
Author(s):  
Ali Fazli ◽  
Denis Rodrigue

Recycling and recovery of waste tires is a serious environmental problem since vulcanized rubbers require several years to degrade naturally and remain for long periods of time in the environment. This is associated to a complex three dimensional (3D) crosslinked structure and the presence of a high number of different additives inside a tire formulation. Most end-of-life tires are discarded as waste in landfills taking space or incinerated for energy recovery, especially for highly degraded rubber wastes. All these options are no longer acceptable for the environment and circular economy. However, a great deal of progress has been made on the sustainability of waste tires via recycling as this material has high potential being a source of valuable raw materials. Extensive researches were performed on using these end-of-life tires as fillers in civil engineering applications (concrete and asphalt), as well as blending with polymeric matrices (thermoplastics, thermosets or virgin rubber). Several grinding technologies, such as ambient, wet or cryogenic processes, are widely used for downsizing waste tires and converting them into ground tire rubber (GTR) with a larger specific surface area. Here, a focus is made on the use of GTR as a partial replacement in virgin rubber compounds. The paper also presents a review of the possible physical and chemical surface treatments to improve the GTR adhesion and interaction with different matrices, including rubber regeneration processes such as thermomechanical, microwave, ultrasonic and thermochemical producing regenerated tire rubber (RTR). This review also includes a detailed discussion on the effect of GTR/RTR particle size, concentration and crosslinking level on the curing, rheological, mechanical, aging, thermal, dynamic mechanical and swelling properties of rubber compounds. Finally, a conclusion on the current situation is provided with openings for future works.


2017 ◽  
Vol 134 (40) ◽  
pp. 45354 ◽  
Author(s):  
Yonglai Lu ◽  
Ying Yang ◽  
Peng Xiao ◽  
Yuxing Feng ◽  
Li Liu ◽  
...  

2018 ◽  
Vol 52 (22) ◽  
pp. 3099-3108 ◽  
Author(s):  
Xavier Colom ◽  
Marc Marín-Genescà ◽  
Ramon Mujal ◽  
Krzysztof Formela ◽  
Javier Cañavate

Ground tire rubber from car and truck was modified using microwave irradiation at variable time. The irradiated ground tire rubber was used as filler in composites based on natural rubber. The composites, with high content of ground tire rubber, were prepared using an internal batch mixer and subsequently cross-linked at 160℃. The influence of the ground tire rubber source (car/truck) and irradiation time on structure, physico-mechanical behaviour, thermal properties and morphology of natural rubber/ground tire rubber composites was studied. The interfacial interactions between ground tire rubber and natural rubber as function of ground tire rubber source and irradiation time were evaluated by Fourier transform infrared spectroscopy, thermogravimetric analysis, tensile tests, swelling measurements and scanning electron microscopy. The results showed that irradiation of ground tire rubber slightly enhanced tensile properties and cross-link density of natural rubber/ground tire rubber composites. This effect was more evident in the case of ground tire rubbertruck because of its higher content of natural rubber and was reflected in changes in the interfacial adhesion, which were confirmed by the results of Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy analysis.


Sign in / Sign up

Export Citation Format

Share Document