Isolated n-decane droplet combustion – Dual stage and single stage transition to “Cool Flame” droplet burning

2017 ◽  
Vol 36 (2) ◽  
pp. 2523-2530 ◽  
Author(s):  
T.I. Farouk ◽  
D. Dietrich ◽  
F.E. Alam ◽  
F.L. Dryer
Author(s):  
Fu-Ying Huang ◽  
Tetsuo Semba ◽  
Matthew White

Higher TPI HDD requires lower disturbance and higher error rejection capability. One of the limitations to achieve high error rejection capability is the dynamics of the actuator. Dual stage actuator (DSA) has been considered to replace single stage actuator (SSA) someday because of system dynamics difference and more freedom in servo design that may avoid the constraint of single stage actuator dynamics on servo. SSA and DSA were compared based on their dynamics, servo designs, and TMR benefits. The extendibility and limitations of both systems were studied. The criteria on when DSA would be implemented are also discussed.


2021 ◽  
Author(s):  
Miguel Crespo ◽  
Pablo Garcia ◽  
Konstantin Edl ◽  
Ramy Georgious ◽  
Cristian Blanco ◽  
...  

Vox Sanguinis ◽  
2003 ◽  
Vol 85 (4) ◽  
pp. 267-275 ◽  
Author(s):  
J. Ringwald ◽  
J. Zingsem ◽  
R. Zimmermann ◽  
E. Strasser ◽  
M. Antoon ◽  
...  
Keyword(s):  

Author(s):  
Eric D. Miller ◽  
Raymond A. de Callafon

In the realm of hard disk drives (HDD), dual-stage servo control has been shown to achieve increased control bandwidth and reduced power consumption compared to single-stage architectures [1]–[4]. Motivated by these results, we seek to apply dual-stage control to an analogous case of an optical pointing system, which has similar objectives of high-bandwidth control over a wide spatial range.


Author(s):  
K. Rahbar ◽  
S. Mahmoud ◽  
R. K. Al-Dadah ◽  
N. Moazami

Organic Rankine cycle is one of the most efficient technologies that can utilize low-to-medium grade heat sources and generate useful power. Radial inflow turbine (RIT) is the key component of the ORC and its efficiency has significant effect on the overall cycle performance. Obtaining high cycle thermal efficiency requires large pressure difference (expansion ratio) across the cycle. With the low speed of sound of organic fluids and the high expansion ratios, RIT becomes chocked with supersonic flow regime and shock waves that deteriorate the turbine efficiency and hence reduce the cycle performance. Therefore, developing highly efficient RIT that can both preserve the high expansion ratio requirements of the ORC and maintain the turbine isentropic efficiency is crucial. This paper proposed the complete 1-D and 3-D numerical optimization of two different configurations as single-stage supersonic and dual-stage transonic RITs. Initially, the integrated 1-D modelling of the ORC with RIT coupled with genetic algorithm optimization technique was conducted to maximize the cycle thermal efficiency. The results showed that the dual-stage RIT exhibited considerably higher turbine efficiency in both stages and hence higher cycle efficiency compared to the single-stage supersonic one. Both configurations were further optimized using the 3-D CFD optimization procedure to maximize the turbine efficiency. The CFD results showed that the optimization of each stage individually was successful as the turbine performance increased significantly. The results revealed that the optimizations were more effective for the dual-stage transonic turbine compared to the single-stage supersonic due to the presence of shock waves. Comparison of the optimized single-stage supersonic RIT and complete dual-stage transonic RIT showed that about 15.7%, 10.63kW and 16.08% higher turbine isentropic efficiency, turbine power and cycle thermal efficiency were achieved respectively with the latter configuration.


2016 ◽  
Vol 20 (6) ◽  
pp. 1118-1130 ◽  
Author(s):  
Kalyanasundaram Seshadri ◽  
Norbert Peters ◽  
Forman A. Williams ◽  
Vedha Nayagam ◽  
Guenter Paczko

Author(s):  
Andrey Gunawan ◽  
Alexander Limia ◽  
Jong Min Ha ◽  
Peter A. Kottke ◽  
Seung Woo Lee ◽  
...  

A sodium thermal electrochemical converter (Na-TEC) converts heat directly into electricity without moving parts by isothermal expansion of ions through beta”-alumina solid-electrolyte (BASE). These generators are most similar to thermoelectric generators; however, they are considerably more efficient than the best performing thermoelectric materials. While these heat engines have been considered for CSP applications, literature review found that the efficiency of single-stage Na-TEC could readily achieve 20% even though ideal cycle efficiencies predict above 45% efficiency at elevated temperatures. Thermal parasitic loss has been identified to be responsible for the largest drop in the efficiency. Our recent study shows that staging helps to improve thermal management of the Na-TEC, due to the lower average temperature of the device, which can reduce the thermal parasitic loss. We demonstrate that dual-stage device can improve the efficiency by up to 8% over the best performing single-stage device. We are currently designing and developing a modular dual-stage Na-TEC power block with target efficiency of 33%. We emphasize modularity because this power block can be potentially deployed for both small-scale dish solar, which is appropriate for distributed residential scale (2–3 kWe), and large-scale heliostats and parabolic trough CSP, which is appropriate for centralized industrial scale. A fundamental cost-scaling relationship for this technology was developed based on this design. System variables and component manufacturing methods with material selection for processes were established. The current off-the-shelf component costs indicated an overnight capital cost of $2,044/kWe. The costs of BASE, manufacturing, and electrode preparation have driven the overall price of the module. The paper demonstrates $/W design optimization and cost scaling analysis to reduce the system capital $/W metric below $ 1,500/kWe, with the goal being to achieve the cost target of <900/kWe set by Department of Energy’s Sun Shot Initiative.


Sign in / Sign up

Export Citation Format

Share Document