MCNPX modelling of the NPL manganese bath facility based on a converted CAD model

2010 ◽  
Vol 45 (10) ◽  
pp. 1346-1349 ◽  
Author(s):  
N.J. Roberts ◽  
M.J. Parfitt
Keyword(s):  
2010 ◽  
Vol 13 (4) ◽  
pp. 91-98
Author(s):  
Tuan Dinh Phan ◽  
Binh Thien Nguyen ◽  
Dien Khanh Le ◽  
Phuong Hoang Pham

The paper presents an application the research results previously done by group on the influence of technological parameters to the deformation angle and finish surface quality in order to choose technology parameters for the incremental sheet forming (ISF) process to produce products for the purpose of rapid prototyping or single-batch production, including all steps from design and process 3D CAD model, calculate and select the technological parameters, setting up manufacturing and the stage of post-processing. The samples formed successfully showed high applicability of this technology to practical work, the complex products with the real size can be produced in industries: automotive, motorcycle, civil...


2015 ◽  
Vol 6 (2) ◽  
pp. 89-93
Author(s):  
S. Bodzás ◽  
I. Dudás

The objectives of this publication are the analysis of surfaces and edges of a new geometric spiroid hob with arched profile in axial section and the definition of their equations for computer modelling. On the basis of this we will work out the CAD model of hob for our further geometric calculations.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Sovannary Tuot ◽  
Alvin Kuo Jing Teo ◽  
Kiesha Prem ◽  
Pheak Chhoun ◽  
Chamroen Pall ◽  
...  

Abstract Background Multi-month dispensing (MMD) is the mainstay mechanism for clinically stable people living with HIV in Cambodia to refill antiretroviral therapy (ART) every 3-6 months. However, less frequent ART dispensing through the community-based ART delivery (CAD) model could further reduce the clients’ and health facilities’ burden. While community-based services have been recognized as an integral component of HIV response in Cambodia, their role and effectiveness in ART delivery have yet to be systematically assessed. This study aims to evaluate the CAD model’s effectiveness on the continuum of care and treatment outcomes for stable people living with HIV in Cambodia. Methods We will conduct this quasi-experimental study in 20 ART clinics across the capital city and nine provinces between May 2021 and April 2023. Study sites were purposively selected based on the availability of implementing partners, the number of people living with HIV each clinic serves, and the accessibility of the clinics. In the intervention arm, approximately 2000 stable people living with HIV will receive ART and services from the CAD model. Another 2000 stable people living with HIV in the control arm will receive MMD—a standard care model for stable people living with HIV. The primary outcomes will be retention in care, viral load suppression, and adherence to ART. The secondary endpoints will include health providers’ work burden, the model’s cost-effectiveness, quality of life, mental health, social support, stigma, and discrimination. We will compare the outcome indicators within each arm at baseline, midline, and endline using descriptive and inferential statistics. We will evaluate the differences between the intervention and control arms using the difference-in-differences method. We will perform economic evaluations to determine if the intervention is cost-effective. Discussion This study will build the evidence base for future implementation and scale-up of CAD model in Cambodia and other similar settings. Furthermore, it will strengthen engagements with community stakeholders and further improve community mobilization, a vital pillar of the Cambodian HIV response. Trial registration ClinicalTrials.gov, NCT04766710. Registered 23 February 2021, Version 1.


2021 ◽  
Vol 11 (4) ◽  
pp. 145
Author(s):  
Nenad Bojcetic ◽  
Filip Valjak ◽  
Dragan Zezelj ◽  
Tomislav Martinec

The article describes an attempt to address the automatized evaluation of student three-dimensional (3D) computer-aided design (CAD) models. The driving idea was conceptualized under the restraints of the COVID pandemic, driven by the problem of evaluating a large number of student 3D CAD models. The described computer solution can be implemented using any CAD computer application that supports customization. Test cases showed that the proposed solution was valid and could be used to evaluate many students’ 3D CAD models. The computer solution can also be used to help students to better understand how to create a 3D CAD model, thereby complying with the requirements of particular teachers.


2021 ◽  
Vol 1038 (1) ◽  
pp. 012082
Author(s):  
E Pompa ◽  
S Porziani ◽  
C Groth ◽  
A Chiappa ◽  
G D’Amico ◽  
...  
Keyword(s):  

2018 ◽  
Vol 184 ◽  
pp. 02006
Author(s):  
Mariana Ratiu ◽  
Alexandru Rus ◽  
Monica Loredana Balas

In this paper, we present the first steps in the process of the modeling in ADAMS MBS of MSC software of the mechanical system of an articulated robot, with six revolute joints. The geometric 3D CAD model of the robot, identical to the real model, in the PARASOLID format, is imported into ADAMS/View and then are presented the necessary steps for building the kinematic model of the robot. We conducted this work, in order to help us in our future research, which will consist of kinematic and dynamic analysis and optimization of the robot motion.


2002 ◽  
Vol 26 (1) ◽  
pp. 17-26 ◽  
Author(s):  
Antonios Gasteratos ◽  
Carlos Beltran ◽  
Giorgio Metta ◽  
Giulio Sandini

Author(s):  
Michael Lundin ◽  
Erik Lejon ◽  
Andreas Dagman ◽  
Mats Näsström ◽  
Peter Jeppsson

New business models and more integrated product development processes require designers to make use of knowledge more efficiently. Capture and reuse are means of coping, but support, techniques, and mechanisms have yet to be sufficiently addressed. This paper consequently explores how computer-aided technologies (CAx) and a computer-aided design (CAD) model-oriented approach can be used to improve the efficiency of design module capture and representation for product family reuse. The first contribution of this paper is the investigation performed at a Swedish manufacturing company and a set of identified challenges related to design capture and representation for reuse in product family development. The second contribution is a demonstrated and evaluated set of systems and tools, which exemplifies how these challenges can be approached. Efficient design capture is achieved by a combination of automated and simplified design capture, derived from the design implementation (CAD model definition) to the extent possible. Different design representations can then be accessed by the designer using the CAD-internal tool interface. A web application is an example of more general-purpose representation to tailor design content, all of which is managed by a product lifecycle management (PLM) system. Design capture is based on a modular view block definition, stored in formal information models, management by a PLM system, for consistent and reliable design content. It was, however, introduced to support the rich and expressive forms of capture and representation required to facilitate understanding, use, and reuse of varied and increasingly complex designs. A key element in being able to describe a complex design and its implementation has been capture and representation of a set of design states. The solution has been demonstrated to effectively be able to capture and represent significant portions of a step-by-step design training material and the implementation of complex design module through a set of design decisions taken. The validity and relevance of the proposed solution is strengthened by the level of acceptance and perceived value from experienced users, together with the fact that the company is implementing parts of it today.


Sign in / Sign up

Export Citation Format

Share Document