scholarly journals A 2D imaging system for mapping luminescence-depth profiles for rock surface dating

2021 ◽  
pp. 106697
Author(s):  
E.L. Sellwood ◽  
M. Kook ◽  
M. Jain
2021 ◽  
pp. 101169
Author(s):  
Joanne Elkadi ◽  
Georgina E. King ◽  
Benjamin Lehmann ◽  
Frédéric Herman
Keyword(s):  

2015 ◽  
Vol 63 ◽  
pp. 73-78
Author(s):  
F. Arce ◽  
L. Leija ◽  
A. Vera ◽  
H. Sossa

2014 ◽  
Vol 53 (23) ◽  
pp. 5259 ◽  
Author(s):  
Zhongwei Tan ◽  
Wenhua Ren ◽  
Zhibo Liu ◽  
Suchun Feng ◽  
Zhiwei Chen

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Steffen Auerswald ◽  
Stephan Schreml ◽  
Robert Meier ◽  
Alexandra Blancke Soares ◽  
Maximilian Niyazi ◽  
...  

Abstract Objectives Postradiogenic wound healing disorders are an important clinical problem. While a variety of treatment modalities are available, there is no strategy to objectively judge treatment success. The aim of this study was to evaluate a 2D luminescence imaging system for pH and oxygen in non-healing wounds after radiotherapy. Methods Luminescence 2D imaging was performed with the VisiSens (Presens, Regensburg, Germany) 2D imaging systems A1 and A2 for oxygen and pH, respectively. Biocompatible planar luminescent sensor foils were applied to non-irradiated and irradiated skin as well as to radiogenic wounds of five patients and the pH and the oxygen saturation was determined. Results pH measurements showed significant differences between non-irradiated skin (6.46 ± 0.18) and irradiated skin (6.96 ± 0.26). Radiogenic wounds exhibited the highest pH values (7.53 ± 0.26). Oxygen measurements revealed a mean oxygen saturation of non-irradiated skin of 6.19 ± 0.83 mmHg. The highest value of oxygen saturation (28.4 ± 2.4 mmHg) was found on irradiated skin while irradiated wounds had a poor oxygen saturation (9.4 ± 2.2 mmHg) (mean ± s.e.m.). Conclusion We found that routine measurement of pH and pO2 in patients could be easily integrated into the clinical routine. The results of the measurements show unfavorable pH and oxygen saturation conditions for wound healing in irradiated wounds. Interestingly, irradiated wounds exhibit a more pronounced hypoxia than irradiated skin which is reflected by an altered pH and pO2 compared to unirradiated skin, which has the potential to serve as a prognostic marker in the future. In addition to the objectification of the treatment success of postradiogenic wound healing disorders, the extent of skin toxicity could already be predicted during radiotherapy with this method.


2008 ◽  
Vol 62 (11) ◽  
pp. 1216-1220
Author(s):  
Shigeaki Morita ◽  
Eiji Hattori ◽  
Kuniyuki Kitagawa

Both a flow of water vapor generated from a humidification device and stable water vapor at constant moisture were successfully visualized by near-infrared (NIR) laser absorption spectroscopy. Two different types of optical arrangement for two-dimensional (2D) imaging, i.e., one-wave-length reflection and two-wavelength transmission, were tested. A flow of water vapor within a wide view range was clearly visualized by the former, while low content of stable water vapor was quantitatively detected by the latter. It was demonstrated that a detection limit of 0.8 g·m−3 was achieved by means of the 2D-NIR imaging system developed in the present study.


2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Stefano Moscato ◽  
Giulia Matrone ◽  
Marco Pasian ◽  
Andrea Mazzanti ◽  
Maurizio Bozzi ◽  
...  

This paper presents the preliminary design of a mm-wave ultra-wideband (UWB) radar for breast cancer detection. A mass screening of women for breast cancer is essential, as the early diagnosis of the tumour allows best treatment outcomes. A mm-wave UWB radar could be an innovative solution to achieve the high imaging resolution required without risks for the patient. The 20–40 GHz frequency band used in the system proposed in this work guarantees high cross/range resolution performances. The developed preliminary architecture employs two monomodal truncated double-ridge waveguides that act as antennas; these radiators are shifted by microstep actuators to form a synthetic linear aperture. The minimum antenna-to-antenna distance achievable, the width of the synthetic aperture, and the minimum frequency step determine the performance of the 2D imaging system. Measures are performed with a mm-wave vector network analyzer driven by an automatic routine, which controls also the antennas shifts. The scattering matrix is then calibrated and the delay-multiply-and-sum (DMAS) algorithm is applied to elaborate a high-resolution 2D image of the targets. Experimental results show that 3 mm cross and 8 mm range resolutions were achieved, which is in line with theoretical expectations and promising for future developments.


2020 ◽  
Vol Publish Ahead of Print ◽  
Author(s):  
Michael V. Fedewa ◽  
Katherine Sullivan ◽  
Bjoern Hornikel ◽  
Clifton J. Holmes ◽  
Casey J. Metoyer ◽  
...  

2021 ◽  
Author(s):  
Joanne Elkadi ◽  
Georgina King ◽  
Benjamin Lehmann ◽  
Frederic Herman
Keyword(s):  

2020 ◽  
Author(s):  
Lucas Ageby ◽  
Diego E. Angelucci ◽  
Dominik Brill ◽  
Francesco Carrer ◽  
Helmut Brückner ◽  
...  

<p>Reconstructing exposure histories of rock surfaces with luminescence dating is a recently developed tool which has proven valuable to chronologically constrain archaeological rock structures (e.g. Sohbati et al., 2012). Here, we explore the possibility to use infrared stimulated luminescence (IRSL) exposure dating to constrain the period of usage of two dry stone enclosure complexes (MZ001S and MZ005S) in Val di Sole, Trentino, Italy. Archaeological investigations confirm that the enclosures were used to keep livestock and radiocarbon ages and archaeological finds from MZ005S restrain the oldest time of use to the Late Middle Ages or Early Modern Period (Carrer and Angelucci, 2018). One 19th-century potshard has been recovered from MZ001S and interviews with residents indicate that MZ001S may have been in use until the mid-20th century. Mica and quartz-rich gneiss rocks of both structures were sampled, together with calibration rock surfaces which had been exposed for one year. Cores were extracted from the rocks with a water-cooled bench drill and cut with a cooled precision saw. Whole rock slices (approx. 0.7 mm thin) were heated to 180 °C for 100 seconds and were subsequently measured with infrared diodes at 50 °C for 300 seconds to create IRSL-depth profiles. Exposure ages were calculated with the exposure dating model developed by Sohbati et al. (2011) for which we used de-trapping rates calculated from the exposed calibration surfaces. IRSL-with-depth profiles are presented from both natural and calibration surfaces. Preliminary ages severely underestimate expected exposure ages (decades of exposure, compared to expected centuries of exposure) and precision of the ages is low.  More investigations are necessary but possible reasons for this age discrepancy are denudation of the rock surface, heterogenic mineralogy with patches of opaque minerals which locally increase light attenuation, or the calibration samples do not represent good analogues for the rocks from the stone structures. The low precision of the ages appears to originate from variations in the IRSL-depth profiles between different cores cut from the same sample.</p><p> </p><p><strong>References</strong></p><p>Carrer, F., Angelucci, D.E., 2018. Continuity and discontinuity in the history of upland pastoral landscapes: the case study of Val Molinac and Val Poré (Val di Sole, Trentino, Eastern Italian Alps). Landscape Research 43, 862–877. doi:10.1080/01426397.2017.1390078.</p><p>Sohbati, R., Murray, A., Jain, M., Buylaert, J.P., Thomsen, K., 2011. Investigating the resetting of OSL signals in rock surfaces. Geochronometria 38. doi:https://doi.org/10.2478/s13386-011-0029-2.</p><p>Sohbati, R., Murray, A. S., Chapot, M. S., Jain, M., and Pederson, J. 2012. Optically stimulated luminescence (OSL) as a chronometer for surface exposure dating J. Geophys. Res., 117, doi:10.1029/2012JB009383.</p>


Sign in / Sign up

Export Citation Format

Share Document