Higher ground source heat pump COP in a residential building through the use of solar thermal collectors

2015 ◽  
Vol 80 ◽  
pp. 26-39 ◽  
Author(s):  
Aymeric Girard ◽  
Eulalia Jadraque Gago ◽  
Tariq Muneer ◽  
Gustavo Caceres
2021 ◽  
Author(s):  
Farzin M. Rad

This thesis presents a study for examining the viability of hybrid ground source heat pump (GSHP) systems that use solar thermal collectors as the supplemental component in heating dominated buildings. Loads for an actual house in the City of Milton near Toronto were estimated. TRNSYS, a system simulation software tool, was used to model the yearly performance of conventional GSHP as well as the proposed hybrid GSHP system. The house was equipped with a data monitoring system which was installed to read and record fluid flow, temperature and electricity consumption in different components of the system. The actual yearly data collected from the site was examined against the simulation results. In addition, a sensitivity analysis was carried out to determine the relationship between the solar collector area and the ground loop heat exchanger (GHX) length. It was shown that the ratio of GHX length reduction to solar panel area of 4.7 m/m This study demonstrates that a hybrid GSHP system, combined with solar thermal collectors, is a feasible choice for space conditioning for heating dominated houses. It was shown that the solar thermal energy storage in the ground could reduce a large amount of ground loop heat exchanger length. Combining three solar thermal collectors with a total area of 6.81m


2021 ◽  
Author(s):  
Farzin M. Rad

This thesis presents a study for examining the viability of hybrid ground source heat pump (GSHP) systems that use solar thermal collectors as the supplemental component in heating dominated buildings. Loads for an actual house in the City of Milton near Toronto were estimated. TRNSYS, a system simulation software tool, was used to model the yearly performance of conventional GSHP as well as the proposed hybrid GSHP system. The house was equipped with a data monitoring system which was installed to read and record fluid flow, temperature and electricity consumption in different components of the system. The actual yearly data collected from the site was examined against the simulation results. In addition, a sensitivity analysis was carried out to determine the relationship between the solar collector area and the ground loop heat exchanger (GHX) length. It was shown that the ratio of GHX length reduction to solar panel area of 4.7 m/m This study demonstrates that a hybrid GSHP system, combined with solar thermal collectors, is a feasible choice for space conditioning for heating dominated houses. It was shown that the solar thermal energy storage in the ground could reduce a large amount of ground loop heat exchanger length. Combining three solar thermal collectors with a total area of 6.81m


2013 ◽  
Vol 732-733 ◽  
pp. 564-570 ◽  
Author(s):  
Ying Ning Hu ◽  
Ya Zhao Liu ◽  
Jun Lin ◽  
Yan Wang

A ground source heat pump system of combined office and residential buildings in hot summer and warm winter region is introduced. The system performance is studied through the experiment, and the performance of underground heat balance is analyzed by TRNSYS. The results show the superiority and applicability of the ground source heat pump system.


Author(s):  
Jiang Zhu ◽  
Yong Tao

The U-tube sizes and varied thermal conductivity with different grout materials are studied based on the benchmark residential building in Hot-humid Pensacola, Florida. In this study, the benchmark building is metered and the data is used to validate the simulation model. And a list of comparative simulation cases with varied parameter value are simulated to study the importance of pipe size and grout to the ground source heat pump energy consumption. The simulation software TRNSYS [1] is employed to fulfill this task. The results show the preliminary energy saving based on varied parameters. Future work needs to be conducted for the cost analysis, include the installation cost from contractor and materials cost.


Energies ◽  
2015 ◽  
Vol 8 (12) ◽  
pp. 13378-13394 ◽  
Author(s):  
Yu Nam ◽  
Xin Gao ◽  
Sung Yoon ◽  
Kwang Lee

Sign in / Sign up

Export Citation Format

Share Document