scholarly journals Corrigendum to ‘A dynamic material flow analysis of lithium-ion battery metals for electric vehicles and grid storage in the UK: assessing the impact of shared mobility and end-of-life strategies’

2021 ◽  
Vol 170 ◽  
pp. 105582
Author(s):  
Mashael Kamran ◽  
Marco Raugei ◽  
Allan Hutchinson
2021 ◽  
Author(s):  
Ayse Lisa Allison ◽  
Esther Ambrose-Dempster ◽  
Teresa Domenech Aparsi ◽  
Maria Bawn ◽  
Miguel Casas Arredondo ◽  
...  

Due to the COVID-19 pandemic, the UK government has mandated the use of face masks in various public settings and recommends the use of reusable masks to combat shortages of medically graded single-use masks in healthcare. To assist decision-making on the choice of masks for future pandemics, where shortages may not be a contributing factor, the UCL Plastic Waste Innovation Hub has carried out a multidisciplinary comparison between single-use and reusable masks based on their anatomy, standalone effectiveness, behavioural considerations, environmental impacts and costs. Although current single-use masks have a higher standalone effectiveness against bacteria and viruses, studies show that reusable masks have adequate performance in slowing infection rates of respiratory viruses. Material Flow Analysis, Life Cycle Assessment and cost comparison show that reusable masks have a lower environmental and economic impact than single-use masks. If every person in the UK uses one single-use mask each day for a year, it will create a total of 124,000 tonnes of waste, 66,000 tonnes of which would be unrecyclable contaminated plastic waste (the masks), with the rest being the recyclable packaging typically used for transportation and distribution of masks.Using reusable masks creates >85% less waste, generates 3.5 times lower impact on climate change and incurs 3.7 times lower costs. Further behavioural research is necessary to understand the extent and current practices of mask use; and how these practices affect mask effectiveness in reducing infection rates. Wearing single-use masks may be preferred over reusable masks due to perceptions of increased hygiene and convenience. Understanding behaviour towards the regular machine-washing of reusable masks for their effective reuse is key to maximise their public health benefits and minimise environmental and economic costs.


2020 ◽  
Author(s):  
Ayse Lisa Allison ◽  
Esther Ambrose-Dempster ◽  
Teresa Domenech Aparsi ◽  
Maria Bawn ◽  
Miguel Casas Arredondo ◽  
...  

Due to the COVID-19 pandemic, the UK government has mandated the use of face masks in various public settings and recommends the use of reusable masks to combat shortages of medically graded single-use masks in healthcare. To assist decision-making on the choice of masks for future pandemics, where shortages may not be a contributing factor, the UCL Plastic Waste Innovation Hub has carried out a multidisciplinary comparison between single-use and reusable masks based on their anatomy, standalone effectiveness, behavioural considerations, environmental impacts and costs. Although current single-use masks have a higher standalone effectiveness against bacteria and viruses, studies show that reusable masks have adequate performance in slowing infection rates of respiratory viruses. Material Flow Analysis, Life Cycle Assessment and cost comparison show that reusable masks have a lower environmental and economic impact than single-use masks. If every person in the UK uses one single-use mask each day for a year, it will create a total waste of 124,000 tonnes, 66,000 tonnes of which would be unrecyclable contaminated plastic waste. Using reusable masks creates >85% less waste, generates 3.5 times lower impact on climate change and incurs 3.7 times lower costs. Further behavioural research is necessary to understand the extent and current practices of mask use, and its effectiveness in reducing infection rates. Wearing single-use masks may be preferred over reusable masks due to perceptions of increased hygiene and convenience. Understanding behaviour towards the regular machine-washing of reusable masks for their effective reuse is key to maximise their public health benefits and minimise environmental and economic costs.


2009 ◽  
Vol 59 (10) ◽  
pp. 1911-1920 ◽  
Author(s):  
F. Meinzinger ◽  
K. Kröger ◽  
R. Otterpohl

Material Flow Analysis is a method that can be used to assess sanitation systems with regard to their environmental impacts. Modelling water and nutrients flows of the urban water, wastewater and waste system can highlight risks for environmental pollution and can help evaluating the potential for linking sanitation with resource recovery and agricultural production. This study presents the results of an analysis of nitrogen and phosphorus flows of Arba Minch town in South Ethiopia. The current situation is modelled and possible scenarios for upgrading the town's sanitation system are assessed. Two different scenarios for nutrient recovery are analysed. Scenario one includes co-composting municipal organic waste with faecal sludge from pit latrines and septic tanks as well as the use of compost in agriculture. The second scenario based on urine-diversion toilets includes application of urine as fertiliser and composting of faecal matter. In order to allow for variations in the rate of adoption, the model can simulate varying degrees of technology implementation. Thus, the impact of a step-wise or successive approach can be illustrated. The results show that significant amounts of plant nutrients can be provided by both options, co-composting and urine diversion.


2018 ◽  
Vol 6 (1-2) ◽  
pp. 101-107
Author(s):  
Szilárd Kádár

The current climate change and population boom is the result of the technical developments that aroused by the industrial revolution and the Second Word War. The food shortage arising from that steadily increase poses several problem for agriculture which is exacerbated by the ineffectual operation of the food processing industry. To cover the required amount of food leads higher greenhouse gas emission than CO2 like CH4 and N2O. Considering this fact I kept it important to find a solution that can be inserted in our countries facility and which is independent from soil usage. The importance of the cattle breeding sector is that it doesn’t require those agricultural lands which could also serve human’s need. I will examine the impact of the extensive cattle with material flow analysis, which is able to show the flows of the specific materials in a given place and in a given time. This calculation is not used count with the pollution and economic factors of the materials. According to my survey the results show that the examined farms needs 4,72; 4,64; 0,24 kg of material stock per one kg of meat to maintain the production. This production needs average 10-13 kg of dry matter input, of which major content is grass. As an unintended emission CO2 emission is also generated: The generated amount of CO2 depends on the Farm structure: in average 11,32; 16,02; 16,76 kg CO2 / meat kg. To make comparable results it demands weighted averages. That means to make material flow analysis result like feed intake and CO2 emission needs to be weighted with the time which is needed for the production. It can be claimed that the total CO2 emission of an adult cattle is over 30 kg per one kg of meat, and there are no methods to decrease it. But on the other hand the usage of stocks can be reduced by different methods. The first is the number of the livestock could be increased because it will also increase the efficiency of natural resource usage. On the other hand we can help the farms to co-operate with each other. It allows them to share their stocks. And the last solution is to make multifunctional farms which can produce plants and animals at the same time. Despite of the high rate of productions’ CO2 emission it is still competitive against intensive cattle, owing to the low rate of natural resource requirements


2014 ◽  
Vol 2 (7) ◽  
pp. 1642-1648 ◽  
Author(s):  
Vicente Sebastian Espinoza ◽  
Serkan Erbis ◽  
Leila Pourzahedi ◽  
Matthew J. Eckelman ◽  
Jacqueline A. Isaacs

2007 ◽  
Vol 51 (1) ◽  
pp. 101-117 ◽  
Author(s):  
R. Geyer ◽  
J. Davis ◽  
J. Ley ◽  
J. He ◽  
R. Clift ◽  
...  

2021 ◽  
Vol 164 ◽  
pp. 105122
Author(s):  
Wenqiu Liu ◽  
Wei Liu ◽  
Xinxin Li ◽  
Yeye Liu ◽  
Abiodun Emmanuel Ogunmoroti ◽  
...  

2019 ◽  
Vol 215 ◽  
pp. 570-581 ◽  
Author(s):  
Jiali Song ◽  
Wenyi Yan ◽  
Hongbin Cao ◽  
Qingbin Song ◽  
He Ding ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document