Bioelectrochemical regulation accelerates biomethane production from waste activated sludge: Focusing on operational performance and microbial community

Author(s):  
Zhongxiang Zhi ◽  
Yang Pan ◽  
Xueqin Lu ◽  
Jianhui Wang ◽  
Guangyin Zhen
2018 ◽  
Vol 84 (6) ◽  
Author(s):  
Jingjing Wan ◽  
Yuhang Jing ◽  
Yue Rao ◽  
Shicheng Zhang ◽  
Gang Luo

ABSTRACT Thermophilic alkaline fermentation followed by mesophilic anaerobic digestion (TM) for hydrogen and methane production from waste-activated sludge (WAS) was investigated. The TM process was also compared to a process with mesophilic alkaline fermentation followed by a mesophilic anaerobic digestion (MM) and one-stage mesophilic anaerobic digestion (M) process. The results showed that both hydrogen yield (74.5 ml H 2 /g volatile solids [VS]) and methane yield (150.7 ml CH 4 /g VS) in the TM process were higher than those (6.7 ml H 2 /g VS and 127.8 ml CH 4 /g VS, respectively) in the MM process. The lowest methane yield (101.2 ml CH 4 /g VS) was obtained with the M process. Taxonomic results obtained from metagenomic analysis showed that different microbial community compositions were established in the hydrogen reactors of the TM and MM processes, which also significantly changed the microbial community compositions in the following methane reactors compared to that with the M process. The dynamics of bacterial pathogens were also evaluated. For the TM process, the reduced diversity and total abundance of bacterial pathogens in WAS were observed in the hydrogen reactor and were further reduced in the methane reactor, as revealed by metagenomic analysis. The results also showed not all bacterial pathogens were reduced in the reactors. For example, Collinsella aerofaciens was enriched in the hydrogen reactor, which was also confirmed by quantitative PCR (qPCR) analysis. The study further showed that qPCR was more sensitive for detecting bacterial pathogens than metagenomic analysis. Although there were some differences in the relative abundances of bacterial pathogens calculated by metagenomic and qPCR approaches, both approaches demonstrated that the TM process was more efficient for the removal of bacterial pathogens than the MM and M processes. IMPORTANCE This study developed an efficient process for bioenergy (H 2 and CH 4 ) production from WAS and elucidates the dynamics of bacterial pathogens in the process, which is important for the utilization and safe application of WAS. The study also made an attempt to combine metagenomic and qPCR analyses to reveal the dynamics of bacterial pathogens in anaerobic processes, which could overcome the limitations of each method and provide new insights regarding bacterial pathogens in environmental samples.


Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1580
Author(s):  
Farokh laqa Kakar ◽  
Ahmed El Sayed ◽  
Neha Purohit ◽  
Elsayed Elbeshbishy

The main objective of this study was to evaluate the hydrothermal pretreatment’s retention time influence on the volatile fatty acids and biomethane production from thickened waste activated sludge under mesophilic conditions. Six different retention times of 10, 20, 30, 40, 50, and 60 min were investigated while the hydrothermal pretreatment temperature was kept at 170 °C. The results showed that the chemical oxygen demand (COD) solubilization increased by increasing the hydrothermal pretreatment retention time up to 30 min and stabilized afterwards. The highest COD solubilization of 48% was observed for the sample pretreated at 170 °C for 30 min. Similarly, the sample pretreated at 170 °C for 30 min demonstrated the highest volatile fatty acids yield of 14.5 g COD/Lsubstrate added and a methane yield of 225 mL CH4/g TCODadded compared to 4.3 g COD/Lsubstrate added and 163 mL CH4/g TCODadded for the raw sample, respectively. The outcome of this study revealed that the optimum conditions for solubilization are not necessarily associated with the best fermentation and/or digestion performance.


Sign in / Sign up

Export Citation Format

Share Document