Modelling solid-liquid separation and particle size classification in decanter centrifuges

2021 ◽  
Vol 263 ◽  
pp. 118408
Author(s):  
Changzhi Bai ◽  
Hangil Park ◽  
Liguang Wang
Author(s):  
Michelle Quilaqueo ◽  
Minghai Gim-Krumm ◽  
René Ruby-Figueroa ◽  
Elizabeth Troncoso ◽  
Humberto Estay

Precipitation processes are technologies commonly used in hydrometallurgical plants to recover metals or to treat wastewaters. Moreover, solid-liquid separation technologies, such as thickening or filtering, are relevant unit operations, included in the precipitation technologies. These methods are strongly dependent on the characteristics of the solid precipitates formed during the specific precipitation reaction. One of these characteristics is the particle size distribution (PSD) of the solid precipitates which are fed into a solid-liquid separation process. Therefore, PSD determination is a typical practice for the characterization of the slurries generated in a precipitation plant. Furthermore, the precipitates generated in these processes have a colloidal or aggregation behavior, depending on the operational conditions. Nevertheless, the conventional methods used to estimate PSD (e.g., laser diffraction and/or ciclosizer) have not been designed to measure particles that tend to aggregate or disaggregate, since they include external forces (e.g., centrifugal, agitation, pumping and sonication). These forces affect the true size of the aggregates formed in a unit operation, thereby losing representativity in terms of aggregates particle size. This study presents an alternative method of measuring the size distribution of particles with aggregation behavior, particularly, by using non-invasive microscopy and image processing and analysis. The samples used have been obtained from an experimental precipitation process by applying sulfidization to treat the cyanide-copper complexes contained in a cyanidation solution. This method has been validated with statistical tools and compared with a conventional analysis based on laser diffraction. Our results show significant differences between the methods analyzed, demonstrating that image processing and analysis by microscopy is an excellent and non-invasive alternative to obtaining size distribution of aggregates in precipitation processes.


1993 ◽  
Vol 27 (10) ◽  
pp. 1-17 ◽  
Author(s):  
John Gregory

Forces between particles in water become especially important when the particles are in the colloidal size range (less than a few mm). To a first approximation inter-particle forces or colloid interactions are linearly dependent on particle size and they become stronger, relative to external forces, as particle size decreases. The separation of fine particles from water by processes such as coagulation, filtration and flotation can be crucially dependent on the manipulation of colloid interactions, usually to promote attachment of particles to each other or to surfaces. The most important types of colloid interaction are briefly discussed. These include van der Waals forces, electrical interaction, hydration forces, hydrophobic interaction and effects associated with adsorbed polymers, such as steric repulsion and polymer bridging. These are all short-range interactions, which have little influence on the transport of particles but which can have a major effect on collision efficiencies and on the adhesion between particles. Some examples of solid-liquid separation processes in which colloid interactions are important are given.


Sign in / Sign up

Export Citation Format

Share Document