A comparative study between parabolic trough and solar tower technologies in Solar Rankine Cycle and Integrated Solar Combined Cycle plants

Solar Energy ◽  
2013 ◽  
Vol 98 ◽  
pp. 302-314 ◽  
Author(s):  
G. Franchini ◽  
A. Perdichizzi ◽  
S. Ravelli ◽  
G. Barigozzi
Solar Energy ◽  
2002 ◽  
Author(s):  
Ju¨rgen Dersch ◽  
Michael Geyer ◽  
Ulf Hermann ◽  
Scott A. Jones ◽  
Bruce Kelly ◽  
...  

Parabolic trough solar technology has over 125 plant-years of successful operation at nine commercial Solar Electric Generating Systems (SEGS) power plants that are operating near Barstow, California. These solar plants utilize conventional steam Rankine turbine-generator systems, and as a result most people associate parabolic trough solar technology with steam Rankine cycle power plants. Although these plants are clearly optimized for their particular application, other power cycle designs may be appropriate in other situations. Of particular interest is the integration of parabolic trough solar technology with combined cycle power plant technology, a configuration called the integrated solar combined cycle system (ISCCS). Four potential projects in India, Egypt, Morocco, and Mexico are considering the ISSCS configuration. This paper compares the performance, cost, and carbon emissions of ISCCS and SEGS plants with a standard combined cycle plant.


Author(s):  
Bruce Kelly ◽  
Ulf Herrmann ◽  
Mary Jane Hale

Abstract The integrated solar plant concept was initially proposed by Luz Solar International [1] as a means of integrating a parabolic trough solar plant with modern combined cycle power plants. An integrated plant consists of a conventional combined cycle plant, a solar collector field, and a solar steam generator. During sunny periods, feedwater is withdrawn from the combined cycle plant heat recovery steam generator, and converted to saturated steam in the solar steam generator. The saturated steam is returned to the heat recovery steam generator, and the combined fossil and solar steam flows are superheated in the heat recovery steam generator. The increased steam flow rate provides an increase in the output of the Rankine cycle. During cloudy periods and at night, the integrated plant operates as a conventional combined cycle facility. Two studies on integrated plant designs using a General Electric Frame 7(FA) gas turbine and a three pressure heat recovery steam generator are currently being conducted by the authors. Preliminary results include the following items: 1) the most efficient use of solar thermal energy is the production of high pressure saturated steam for addition to the heat recovery steam generator; 2) the quantity of high pressure steam generation duty which can be transferred from the heat recovery steam generator to the solar steam generator is limited; thus, the maximum practical solar contribution is also reasonably well defined; 3) small annual solar thermal contributions to an integrated plant can be converted to electric energy at a higher efficiency than a solar-only parabolic trough plant, and can also raise the overall thermal-to-electric conversion efficiency in the Rankine cycle; and 4) annual solar contributions up to 12 percent in an integrated plant should offer economic advantages over a conventional solar-only parabolic trough power plant.


2017 ◽  
Vol 129 ◽  
pp. 700-707 ◽  
Author(s):  
U. Caldiño-Herrera ◽  
Laura Castro ◽  
O.A. Jaramillo ◽  
J.C. Garcia ◽  
Gustavo Urquiza ◽  
...  

Solar Energy ◽  
2016 ◽  
Vol 134 ◽  
pp. 180-192 ◽  
Author(s):  
Jean-Louis Bouvier ◽  
Ghislain Michaux ◽  
Patrick Salagnac ◽  
Thiebaut Kientz ◽  
Dominique Rochier

2006 ◽  
Vol 129 (3) ◽  
pp. 254-265 ◽  
Author(s):  
Na Zhang ◽  
Noam Lior

Cogeneration can improve energy utilization efficiency significantly. In this paper, a new ammonia-water system is proposed for the cogeneration of refrigeration and power. The plant operates in a parallel combined cycle mode with an ammonia-water Rankine cycle and an ammonia refrigeration cycle, interconnected by absorption, separation, and heat transfer processes. The performance was evaluated by both energy and exergy efficiencies, with the latter providing good guidance for system improvement. The influences of the key parameters, which include the basic working solution concentration, the cooling water temperature, and the Rankine cycle turbine inlet parameters on the cycle performance, have been investigated. It is found that the cycle has a good thermal performance, with energy and exergy efficiencies of 27.7% and 55.7%, respectively, for the base-case studied (having a maximum cycle temperature of 450°C). Comparison with the conventional separate generation of power and refrigeration having the same outputs shows that the energy consumption of the cogeneration cycle is markedly lower. A brief review of desirable properties of fluid pairs for such cogeneration cycles was made, and detailed studies for finding new fluid pairs and the impact of their properties on cogeneration system performance are absent and are very recommended.


Sign in / Sign up

Export Citation Format

Share Document