Methodology to design a municipal solid waste pre-collection system. A case study

The recycling of aluminium (Al) packaging as a single fraction is a new obligation within the Circular Economy Package of the EU, with mandatory recycling rates of 50% for 2025 and 60% for 2030. The case study of Al packaging in Austria has been chosen to assess if and what measures need to be taken to achieve these recycling rates and what costs arise from these measures. In particular, the following options of Al recovery, and combinations thereof, have been investigated: bottom ash (BA) treatment; material recovery facilities (MRF) for mixed municipal solid waste; and changes to the selective collection system. The results of the study reveal that the present recycling rate of 55% for A1 packaging in Austria might be improved most significantly by MRF (up to 94%) and advanced BA treatment (up to 72%). Only minor improvements in the recycling rate (+2%) are achievable via a change in the collection system from selective metal to a mixed selective collection (joint collection of metal and lightweight packaging). If the only aim were to increase the recycling rates for Al packaging beyond the future target of 60%, an improvement in the Al recovery rates from BA treatment would be sufficient. With regard to increased recycling quantities of all recyclables, plastics in particular, the implementation of complex systems such as MRF makes sense, even if this results in higher costs for Al recovery (increasing from the current 480 to 640 € t-1 of recycled Al).

Download Full-text

A GIS-based multi-criteria decision support model for planning municipal solid waste collection points: A case study of Çağdaş Neighbourhood, Çiğli District, Izmir, Turkey

Waste Management & Research ◽

10.1177/0734242x211063733 ◽

2021 ◽

pp. 0734242X2110637

Author(s):

Sedat Yalcinkaya ◽

Sevin Uzer

Keyword(s):

Decision Support ◽

Municipal Solid Waste ◽

Solid Waste ◽

Pollutant Emissions ◽

Walking Distance ◽

Waste Collection ◽

Collection System ◽

Decision Support Model ◽

Support Model

This study aims to develop a geographic information system (GIS)-based multi-criteria decision support model to create optimal plans for locating municipal solid waste (MSW) collection points. The model performs a series of consecutive GIS-based spatial analyses to determine alternative plans. Then, it weighs the alternatives considering the social, economic and environmental criteria to determine the optimum solution through analytical hierarchy process. The model was implemented as a case study in Çağdaş neighbourhood of Izmir, Turkey. A total of 42 locations were determined as the optimum collection points out of 245 possible collection points, which yields 39% reduction in collection points compared to the existing system. Total number of waste bins and average walking distance to waste collection points were calculated as 129 and 33 m, respectively. The municipal authority would spend 48.79 $ day−1 on fuel for waste collection and transport. In addition, daily air pollutant emissions generated during the operations were estimated as 2.052 g CO, 0.231 g NMVOC, 8.409 g NOx, 0.954 g N2O, 0.260 g NH3, 0.000227 g Pb and 0.0231 g PM 2.5. The results indicated that 14 out of 69 collection points in the existing collection system were not allocated to any waste source geographically. This study presents a unique method for planning MSW collection points on two key aspects: (1) development of a novel method to determine all possible collection point locations using Thiessen polygons and (2) presenting a holistic planning method considering the impacts of the collection system on the waste generators and waste collectors.

Download Full-text

Design of a Municipal Solid Waste Collection System in Situations with a Lack of Resources: Nikki (Benin), a Case in Africa

Sustainability ◽

10.3390/su13041785 ◽

2021 ◽

Vol 13 (4) ◽

pp. 1785

Author(s):

Mar Carlos-Alberola ◽

Antonio Gallardo Izquierdo ◽

Francisco J. Colomer-Mendoza ◽

Esther Barreda-Albert

Keyword(s):

Municipal Solid Waste ◽

Solid Waste ◽

Low Income ◽

Management Practices ◽

Waste Collection ◽

Collection System ◽

Solid Waste Collection ◽

Waste Management Practices ◽

The Town

Waste collection is one of the most important public services in a town. However, waste collection has not been effectively implemented in some places due to the lack of economic and management resources. The waste is placed in inappropriate sites with the consequent risks of pollution and unhealthy conditions for the inhabitants. Therefore, establishing a municipal solid waste collection plan can be complicated. The methodologies and techniques that work in countries with medium and high income levels cannot be extrapolated to others with low income level because the boundary conditions are widely different. The aim of this paper is to design a municipal solid waste collection system adapted to this type of situation where not much money can be invested and where data are limited. In these cases, municipalities need to use their existing resources effectively. This paper offers a methodology for these cases as well as a case study. The first step was to gather information about the type and amount of waste generated and the characteristics of the town. The second step was to propose the location of the bins and, finally, the waste collection routes. With all these data, the technical and human resources were set. The methodology used was validated in a real case, the town of Nikki (Benin) in Africa. The collection of three waste fractions was designed with the actual resources of the city in order to offer a realistic implementation. Similar situations can be found around the world, and this case study can be used as an example to improve the waste management practices in some places with low resources.

Download Full-text