A model of the coagulation process with solid particles and flocs in a turbulent flow

2002 ◽  
Vol 57 (20) ◽  
pp. 4357-4368 ◽  
Author(s):  
S. Schuetz ◽  
M. Piesche
2004 ◽  
Vol 140 (1-2) ◽  
pp. 79-85 ◽  
Author(s):  
Ayse Sarimeseli ◽  
Gudret Kelbaliyev

Irriga ◽  
2018 ◽  
Vol 23 (2) ◽  
pp. 194-203
Author(s):  
Acácio Perboni ◽  
José Antonio Frizzone ◽  
Rubens Duarte Coelho ◽  
Rogério Lavanholi ◽  
Ezequiel Saretta

SENSIBILIDADE DE GOTEJADORES À OBSTRUÇÃO POR PARTÍCULAS DE AREIA     ACÁCIO PERBONI1; JOSÉ ANTONIO FRIZZONE2; RUBENS DUARTE COELHO2; ROGÉRIO LAVANHOLI3 E EZEQUIEL SARETTA4   1 Professor, IFMT, Campo Novo do Parecis - MT, [email protected] 2 Professor, Departamento de Engenharia de Biossistemas, ESALQ/USP, Piracicaba - SP, [email protected]; [email protected] 3 Doutorando, Departamento de Engenharia de Biossistemas, ESALQ/USP, Piracicaba - SP, [email protected] 4 Professor, UFSM, Cachoeira do Sul - RS, [email protected]     1 RESUMO   O objetivo deste trabalho foi avaliar a influência do tamanho e concentração de partículas de areia e da velocidade de fluxo da água nas linhas na sensibilidade à obstrução de um modelo de gotejador do tipo cilíndrico, não regulado, com vazão nominal de 2 L h-1. Foram realizados ensaios de obstrução com areia misturada em água destilada, combinando os seguintes fatores: três faixas granulométricas de partículas de areia, três concentrações de areia e três velocidades de fluxo de água no tubo. A vazão de 32 gotejadores foi medida a cada doze minutos por meio de um sistema automatizado. Nos ensaios com faixa granulométrica de 0,105 a 0,25 mm, ocorreu a obstrução nas concentrações de 250 e 500 mg L-1, para os regimes de escoamento de transição e turbulento. Já na faixa granulométrica de 0,25 a 0,5 mm, ocorreu obstrução nas concentrações de 100, 250 e 500 mg L-1, para os regimes de escoamento de transição e turbulento. A obstrução de gotejadores ocorreu de forma aleatória nas oito linhas. Após obstruídos os gotejadores não desobstruíram com o passar do tempo de ensaio.   Palavras-chave: microirrigação, partículas sólidas inertes, granulometria, concentração     PERBONI, A.; FRIZZONE, J. A.; COELHO, R. D.; LAVANHOLI, R.; SARETTA, E. SENSITIVITY OF DRIPPERS TO CLOGGING CAUSED BY SAND PARTICLES     2 ABSTRACT   The purpose of this research was to assess the influence of concentration and size of sand particles, and water flow velocity in laterals on the sensitivity of drippers to clogging. A cylindrical integrated non-pressure compensating dripper of 2 L h-1 nominal flow rate was used. Experiments were undertaken using distilled water and sand particles, according to the following levels: (a) three ranges of particles sizes; (b) three concentrations of particles; and, (c) three flow velocities in the laterals. The flow rate of 32 drippers was measured at every 12 minutes by an automated system. Within the range of particle sizes from 0.105 to 0.25 mm, clogging of emitters was observed under transient and turbulent flow regimes, and under particles concentration of 250 and 500 mg L-1. Within the range of particles sizes from 0.25 to 0.5 mm, clogging was observed for all concentrations under transient and turbulent flow regimes. Clogging of emitters occurred as a random phenomenon. Once clogged, emitters did not recover their initial flow rate.    Keywords: micro irrigation, inert solid particles, particle size, concentration


2012 ◽  
Vol 33 (4) ◽  
pp. 521-526 ◽  
Author(s):  
Ahmet Ekmekyapar ◽  
Asım Künkül ◽  
Mehmet Yüceer ◽  
Gudret Kelbaliyev

2018 ◽  
Vol 845 ◽  
pp. 417-461 ◽  
Author(s):  
Dong Li ◽  
Kun Luo ◽  
Jianren Fan

Direct numerical simulations of particle-laden flows in a spatially developing turbulent thermal boundary layer over an isothermally heated wall have been performed with realistic fully developed turbulent inflow boundary conditions. To the authors’ best knowledge, this is the first time the effects of inertial solid particles on turbulent flow and heat transfer in a flat-plate turbulent boundary layer have been investigated, using a two-way coupled Eulerian–Lagrangian method. Results indicate that the presence of particles increases the mean streamwise velocity and temperature gradients of the fluid in the near-wall region. As a result, the skin-friction drag and heat transfer are significantly enhanced in the particle-laden flows with respect to the single-phase flow. The near-wall sweep and ejection motions are suppressed by the particles and hence the Reynolds shear stress and wall-normal turbulent heat flux are attenuated, which leads to reductions in the production of the turbulent kinetic energy and temperature fluctuations. In addition, the coherence and spacing of the near-wall velocity and temperature streaky structures are distinctly increased, while the turbulent vortical structures appear to be disorganized under the effect of the particles. Moreover, the intensity of the streamwise vortices decreases monotonically with increasing particle inertia.


Sign in / Sign up

Export Citation Format

Share Document