Influence of slip preparation and casting conditions on aqueous tape casting of Al2O3

2001 ◽  
Vol 36 (11) ◽  
pp. 2059-2072 ◽  
Author(s):  
Carlos A Gutiérrez ◽  
Rodrigo Moreno
2003 ◽  
Vol 80 (3) ◽  
pp. 615-619 ◽  
Author(s):  
Qiangqiang Tan ◽  
Zhongtai Zhang ◽  
Zilong Tang ◽  
Shaohua Luo ◽  
Keming Fang

2015 ◽  
Vol 30 (12) ◽  
pp. 1291
Author(s):  
ZHANG Yu-Yue ◽  
LIN Jie ◽  
MIAO Guo-Shuan ◽  
GAO Jian-Feng ◽  
CHEN Chu-Sheng ◽  
...  

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 140
Author(s):  
Lichen Liu ◽  
Ziping Cao ◽  
Min Chen ◽  
Jun Jiang

This paper reports the fabrication and characterization of (Bi0.48Sb1.52)Te3 thick films using a tape casting process on glass substrates. A slurry of thermoelectric (Bi0.48Sb1.52)Te3 was developed and cured thick films were annealed in a vacuum chamber at 500–600 °C. The microstructure of these films was analyzed, and the Seebeck coefficient and electric conductivity were tested. It was found that the subsequent annealing process must be carefully designed to achieve good thermoelectric properties of these samples. Conductive films were obtained after annealing and led to acceptable thermoelectric performance. While the properties of these initial materials are not at the level of bulk materials, this work demonstrates that the low-cost tape casting technology is promising for fabricating thermoelectric modules for energy conversion.


2021 ◽  
Vol 44 (2) ◽  
Author(s):  
Prerna Chaturvedi ◽  
Amarsingh Bhabu Kanagaraj ◽  
Amani Alhammadi ◽  
Hamda Al Shibli ◽  
Daniel S Choi

2007 ◽  
Vol 336-338 ◽  
pp. 498-501
Author(s):  
Xian Feng Jiang ◽  
Min Fang Han ◽  
Su Ping Peng

The all processes for manufacturing materials parts of solid oxide fuel cell (SOFC) are discussed in the paper. The films are made in one step by the ways of APS, VPS, EVD, which are usually used to produce the electrolyte and interconnect. The films are thin and good gas-resistance, but with relatively high cost. All parts of SOFC are made by the following ways, such as sol-gel, tape casting, tape calendaring and screen printing, which are suitable for manufacturing samples in industry with the cheapest process by co-sintered together ways.


2019 ◽  
Vol 17 (3) ◽  
pp. 1255-1263 ◽  
Author(s):  
Han Zhao ◽  
Fei Tang ◽  
Yongzhen Xie ◽  
Zicheng Wen ◽  
Kangzhen Tian ◽  
...  

2020 ◽  
Vol 46 (15) ◽  
pp. 23677-23685 ◽  
Author(s):  
Huai-De Teng ◽  
Qi Wei ◽  
Ya-Li Wang ◽  
Su-Ping Cui ◽  
Qun-Yan Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document