Mission design for deep space 1: A low-thrust technology validation mission

1999 ◽  
Vol 45 (4-9) ◽  
pp. 381-388 ◽  
Author(s):  
Marc D. Rayman ◽  
Pamela A. Chadbourne ◽  
Jeffery S. Culwell ◽  
Steven N. Williams
Keyword(s):  
Author(s):  
Zichen Fan ◽  
Mingying Huo ◽  
Naiming Qi ◽  
Ce Zhao ◽  
Ze Yu ◽  
...  

This paper presents a method to use the Bezier curve to rapidly generate three-dimensional low-thrust trajectories, which can provide a suitable initial approximation to be used for more accurate trajectory optimal control tools. Two missions, from Earth to Mars and the asteroid Dionysus, are considered to evaluate the performance of the method. In order to verify the advantages of this method, it is compared with the finite Fourier series method. Numerical results show that the Bezier method can get better performance index in shorter computation time compared with the finite Fourier series method. The applicability of the solution obtained by Bezier method is evaluated by introducing the obtained solution into the Gauss pseudospectral method as an initial guess. The simulation results show that the Bezier method can rapidly generate a very suitable three-dimensional initial trajectory for the optimal solver. This is very important for rapid evaluation of the feasibility of a large number of low-thrust flight schemes in the preliminary mission design stage.


Author(s):  
William G. Baggenstoss ◽  
Tom L. Ashe

Future space power requirements will vary from the subkilowatt range for deep space probes, to the hundreds of kilowatts range for a lunar base, to the multimegawatt range for interplanetary propulsion systems. Closed Brayton cycle (CBC) power conversion has the flexibility to be used in all these power ranges and with a variety of heat source options such as isotope, solar, and nuclear. Each of these types of heat sources has different characteristics that make it more appropriate for particular mission profiles and power output ranges. Heat source characteristics can also be major design drivers in the closed Brayton cycle design optimization process. This paper explores heat source selection, the resulting CBC system designs, and discusses optimization methods as a function of the main design drivers. Such power system requirements as power level, man-rated radiation shielding, fuel costs, eclipse/darkness duration, system mass, radiator area, reliability/mission duration, and insolation level are evaluated through several CBC parametric case studies. These cases include: (1) A 500 We power system for deep space probes, (2) A 50 kWe solar dynamic system for earth orbit and other applications, (3) A 100 kWe man-rated lunar/Mars stationary/rover power system, (4) A 200 to 825 kWe power system for the lunar outpost, and (5) 3300 kWe modules for interplanetary propulsion.


Author(s):  
Nikolay Petrov ◽  
◽  
Tamara Antonova ◽  
◽  

With the rapid development of space technology, the scale of human space exploration is expanding significantly. However, the growing demand for deep space travel cannot be met with conventional chemical engines. Thus, the need for new mechanisms for providing jet thrust, including electric motors, becomes clear. Electric propulsion technology has significant advantages over traditional chemical engines in deep space flight due to its characteristics such as high specific impulse, small size, long service life. A negative feature of electric motors can be called low thrust, however, firstly, in open space this is insignificant and, secondly, the thrust of electric motors can be significantly increased, and for this, there are reserves available at the current level of technology development. Ways to increase the thrust of electric ion thrusters will be detailed and discussed in this work. The increase in the power of ion engines is limited to a large extent by the erosion of the control grids; the ion flow hits the surface of the solid material of the control grid electrode with energetic ions and gradually leads to the failure of this electrode. In this work, the authors will show that the use of field emission as a source of electron beams ionizing the working medium can solve the problem of erosion of control electrodes, due to which it will be possible to significantly increase the strength of the working fields for ion engines, which in turn will increase the specific impulse, efficiency, flow rate and power of the ion engine as a whole.


2016 ◽  
Author(s):  
Eugina D. Mendez Ramos ◽  
Pranay Mishra ◽  
Stephen Edwards ◽  
Dimitri Mavris

Sign in / Sign up

Export Citation Format

Share Document