97/04643 Effect of filler on the mechanical properties of unsaturated polyester resin mortar

1997 ◽  
Vol 38 (6) ◽  
pp. 402
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Unsaturated Polyester Resin ◽  
Unsaturated Polyester Resin Mortar

Physical and mechanical properties of unsaturated polyester resin matrix from recycled PET (based PG ) with corn straw fiber

2021 ◽  
pp. 51305
Author(s):  
Nora Abigail Wilson García ◽  
Jorge Luis Almaral Sánchez ◽  
Ramón Álvaro Vargas Ortiz ◽  
Abel Hurtado Macías ◽  
Nelly Flores Ramírez ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Physical And Mechanical Properties ◽  
Unsaturated Polyester Resin ◽  
Resin Matrix ◽  
Corn Straw ◽  
Recycled Pet

Fabrication and Characterization of E-Glass Fiber Reinforced Unsaturated Polyester Resin Based Composite Materials

2019 ◽  
Vol 24 ◽  
pp. 1-7
Author(s):  
Md. Naimul Islam ◽  
Harun Ar-Rashid ◽  
Farhana Islam ◽  
Nanda Karmaker ◽  
Farjana A. Koly ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Bending Strength ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Glass Fibers ◽  
Tensile Modulus ◽  
Unsaturated Polyester Resin ◽  
Fiber Reinforced ◽  
Bending Modulus

E-glass fiber mat reinforced Unsaturated Polyester Resin (UPR)-based composites were fabricated by conventional hand lay-up technique. The fiber content was varied from 5 to 50% by weight. Mechanical properties (tensile and bending) of the fabricated composites were investigated. The tensile strength (TS) of the 5% and 50% fiber reinforced composites was 32 MPa and 72 MPa, respectively. Similarly, tensile modulus, bending strength and bending modulus of the composites were increased by the increase of fiber loading. Interfacial properties of the composites were investigated by scanning electron microscopy (SEM) and the results revealed that the interfacial bond between fiber and matrix was excellent. Keywords: Unsaturated Polyester Resin, Mechanical Properties, E-glass Fibers, Composites, Polymer.

Experimental Investigation on the Flexural Behaviour of Patched Reinforced Concrete with Unsaturated Polyester Resin Mortar

2015 ◽  
Vol 754-755 ◽  
pp. 457-462 ◽  
Author(s):  
Agus Supriyadi ◽  
Stefanus Adi Kristiawan ◽  
Sandy Raditya
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beam ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Peak Load ◽  
Reinforced Concrete Beam ◽  
Unsaturated Polyester Resin ◽  
Flexural Behaviour ◽  
Control Beam ◽  
Unsaturated Polyester Resin Mortar

This research is aimed to investigate the flexural behaviour of patched reinforced concrete beam with patching material made from unsaturated polyester resin mortar. The variable studied is the dimension of patching zone as compared to the control beam (without patching). Based on the load-deflection observation of the beam under a four-point bending loading, it is confirmed that the flexural behaviour of the patched reinforced concrete beam is similar to that of control beam at a loading up to about peak load. After this load the patched reinforced concrete beam tends to behave more ductile. The patched reinforced concrete beam show less cracking density compared to control concrete.

Sign in / Sign up

Export Citation Format

Share Document