Removal of heavy metals from aqueous solution by chelating resin in a multistage adsorption process

Environmental contamination by toxic heavy metals is a serious worldwide phenomenon. Thus, their removal is a crucial issue. In this study, we found an efficient adsorbent to remove Cu2+ and Ni2+ from aqueous solution using two materials. Chemical modification was used to obtain palygorskite clay from diatomite. The adsorbents were characterized using X-ray florescence, Fourier transform infrared spectroscopy and X-ray diffraction. The effects of contact time, initial concentration, temperature and pH on the adsorption process were investigated. Our results showed that the (%) of maximum adsorption capacity of diatomite was 78.44% for Cu2+ at pH 4 and 77.3% for Ni2+ at pH 7, while the (%) of the maximum adsorption on palygorskite reached 91% for Cu2+ and 87.05% for Ni2+, in the same condition. The results indicate that the pseudo-second-order model can describe the adsorption process. Furthermore, the adsorption isotherms could be adopted by the Langmuir and the Freundlich models with good correlation coefficient (R2). Thus, our results showed that palygorskite prepared from Tunisian diatomite is a good adsorbent for the removal of heavy metals from water.

Download Full-text

Removal of heavy metals from aqueous solution using carbon-based adsorbents: A review

Journal of Water Process Engineering ◽

10.1016/j.jwpe.2020.101339 ◽

2020 ◽

Vol 37 ◽

pp. 101339 ◽

Cited By ~ 8

Author(s):

Chengyu Duan ◽

Tianyu Ma ◽

Jianyu Wang ◽

Yanbo Zhou

Keyword(s):

Heavy Metals ◽

Aqueous Solution ◽

Removal Of Heavy Metals ◽

Carbon Based

Download Full-text

The removal of heavy metals from aqueous solution using natural Jordanian zeolite

Applied Water Science ◽

10.1007/s13201-016-0382-7 ◽

2016 ◽

Vol 7 (4) ◽

pp. 2021-2028 ◽

Cited By ~ 29

Author(s):

Yazan Taamneh ◽

Suhail Sharadqah

Keyword(s):

Heavy Metals ◽

Aqueous Solution ◽

Removal Of Heavy Metals

Download Full-text

Removal of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan Composite

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.789.176 ◽

2013 ◽

Vol 789 ◽

pp. 176-179 ◽

Cited By ~ 3

Author(s):

Eny Kusrini ◽

Nofrijon Sofyan ◽

Dwi Marta Nurjaya ◽

Santoso Santoso ◽

Dewi Tristantini

Keyword(s):

Heavy Metals ◽

Aqueous Solution ◽

Metal Ions ◽

Precipitation Method ◽

X Ray Diffraction ◽

X Ray ◽

Removal Of Heavy Metals ◽

Sem Micrograph ◽

Pseudo Second Order ◽

Chitosan Composite

Hydroxyapatite/chitosan (HApC) composite has been prepared by precipitation method and used for removal of heavy metals (Cr6+, Zn2+and Cd2+) from aqueous solution. The HAp and 3H7C composite with HAp:chitosan ratio of 3:7 (wt%) were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy-energy dispersive X-ray spectroscopy. The SEM results showed that HAp is spherical-shaped and crystalline, while chitosan has a flat structure. SEM micrograph of 3H7C composite reveals crystalline of HAp uniformly spread over the surface of chitosan. The crystal structure of HAp is maintained in 3H7C composite. Chitosan affects the adsorption capacity of HAp for heavy metal ions; it binds the metal ions as well as HAp. The kinetic data was best described by the pseudo-second order. Surface adsorption and intraparticle diffusion take place in the mechanism of adsorption process. The binding of HAp powder with chitosan made the capability of composite to removal of Cr6+, Zn2+and Cd2+from aqueous solution effective. The order of removal efficiency (Cr6+> Cd2+> Zn2+) was observed.

Download Full-text