Influence of nano-ceria sol-gel coating on oxidation behavior of chromium at 1000 °C

2009 ◽  
Vol 16 (6) ◽  
pp. 80-85
Author(s):  
Hui-ming Jin ◽  
Xiao-wei Zhou ◽  
Lin-nan Zhang
2015 ◽  
Vol 35 (14) ◽  
pp. 3789-3796 ◽  
Author(s):  
Wen ZhongLiu ◽  
Xiao Peng ◽  
Li Zhuan ◽  
Hong Wen ◽  
Luo Heng ◽  
...  

2011 ◽  
Vol 148-149 ◽  
pp. 534-537
Author(s):  
Chun Xiang Gao

A very effective approach to improve the oxidation resistance of Ti-6Al-4V alloy was proposed. The Ti-6Al-4V alloy was firstly phosphated and then coated by silica using sol-gel dip-coating technique. A duplex layer of TiP2O7 and amorphous silica was synthesized at the alloy surface. The isothermal and cyclic oxidation behavior of the treated alloy with silica coating and the corresponding bare alloy was investigated at 600 oC in static air to investigate the synergetic effect of phosphorization and amorphous SiO2 coating on the oxidation resistance of the alloy. The isothermal and cyclic oxidation resistances of the alloy were greatly improved.


2018 ◽  
Vol 281 ◽  
pp. 34-39
Author(s):  
Fa Liang Li ◽  
Fang Fu ◽  
Li Lin Lu ◽  
Hai Jun Zhang ◽  
Shao Wei Zhang

Ultrafine powders of β-Sialon were prepared by the combined sol-gel and microwave carbothermal reduction nitridation method, and their oxidation process was studied by a non-isothermal thermogravimetry method. The results indicated that two different mechanism functions respectively corresponded to the initial and final oxidation stages. The reverse Jander equation with activation energy of 240.5 kJ/mol and the Avrami-Erofeev equation with activation energy of 410.7 kJ/mol were respectively identified as the most probable mechanism function for the initial and final oxidation stages in the temperature range of 1423-1623 K.


2007 ◽  
Vol 26 (5-6) ◽  
Author(s):  
X. J. Zhang ◽  
Q. Li ◽  
S. Y. Zhao ◽  
C. X. Gao ◽  
S. J. Wang ◽  
...  

2013 ◽  
Vol 57 (6-9) ◽  
pp. 785-795 ◽  
Author(s):  
I. Ilgaz Soykal ◽  
Hyuntae Sohn ◽  
Jeffrey T. Miller ◽  
Umit S. Ozkan

2009 ◽  
Vol 79-82 ◽  
pp. 671-674
Author(s):  
B.Y. Ren ◽  
Y.H. Gao ◽  
S.J. Wang ◽  
X.J. Zhang ◽  
N.X. Feng

Amorphous silica coating was deposited on the surface of Ni by dip-coating processing from commercial silica sol. Isothermal oxidation of the coated and uncoated specimens at 973 K to 1173 K in air was conducted to investigate the effect of the silica coating on the oxidation behavior of Ni by TGA, SEM and XRD. Results of the oxidation tests showed that the oxidation rate of Ni was reduced greatly due to the applied thin film. The possible mechanism of the effect of thin film on the oxidation of Ni was discussed.


Sign in / Sign up

Export Citation Format

Share Document