scholarly journals Difference in corn kernel moisture content between pre- and post-harvest

2021 ◽  
Vol 20 (7) ◽  
pp. 1775-1782
Author(s):  
Lu-lu LI ◽  
Bo MING ◽  
Jun XUE ◽  
Shang GAO ◽  
Ke-ru WANG ◽  
...  
2022 ◽  
Vol 21 (1) ◽  
pp. 70-77
Author(s):  
Ya-nan GUO ◽  
Liang-yu HOU ◽  
Lu-lu LI ◽  
Shang GAO ◽  
Jun-feng HOU ◽  
...  

1980 ◽  
Vol 60 (3) ◽  
pp. 831-839 ◽  
Author(s):  
J. T. MILLS

Small, 25-kg quantities of moist and dry Brassica napus L. ’Tower’ rapeseed were stored in drums located outdoors for 65 wk. Quality changes occurring in the moist (10.9–15.0% moisture content) rapeseed, which was deliberately allowed to spoil, were compared to those in dry (4.3–4.9% moisture content) seed. Moist seeds in the first 7 wk had high respiration and declined in quality during the 65 wk of storage as indicated by decreased seed germination, increased leakage of seed electrolytes, and increased free fatty acid (FAV) levels. Levels of post-harvest molds, including Aspergillus candidus, A. glaucus group species, A. versicolor, Penicillium verrucosum var. cyclopium and Wallemia sebi, also increased. Mycelia of P. verrucosum var. cyclopium caused seeds of 12.9–17.8% moisture content to become cemented together at the bottom of some drums necessitating removal of samples by chipping at 65 wk. Dry seeds, originally 11.2–12.2% moisture content before drying, had low seed respiration, high germination, low levels of most post-harvest molds but also moderate levels of P. verrucosum var. cyclopium and high FAV and therefore were also of low quality. Drying of the seeds occurred too late to prevent initial rapid loss in seed quality caused by seed enzymatic action and Penicillium activity; to be effective, drying of high moisture seeds should be carried out immediately after combining.


2013 ◽  
Vol 40 (1) ◽  
pp. 3-7
Author(s):  
M. C. Lamb ◽  
C. L. Butts ◽  
P. D. Blankenship

ABSTRACT Runner-type peanut kernel moisture content (MC) is measured periodically during curing and post harvest processing with electronic moisture meters for marketing and quality control. MC is predicted for 250 g samples of kernels with a mathematical function from measurements of various physical properties. To examine the accuracy of the function used in the Dickey-john GAC2100 for measuring MC of runner-type peanuts, 421 samples were measured with the meter and compared to oven MC data subsequently determined using ASAE Standard S410.1. Peanut moisture content for the peanuts according to the meter averaged 19.1% with a SD of 15.4%. Oven moisture contents had a mean of 17.3% and a SD of 8.5%. Means were significantly different (P  =  0.001). A calibration equation was derived from capacitance, conductance, temperature, and test weight data provided by the meter and compared to oven MC data. Moisture contents calculated from the calibration equation had a 17.3% mean and an 8.5% SD equaling values for oven determined moisture contents. Results of the study indicate that the accuracy of the meter in predicting moisture content can be improved considerably utilizing currently collected data and the derived calibration equation developed.


2016 ◽  
Vol 6 (2) ◽  
Author(s):  
S. Syahrul ◽  
R. Romdhani ◽  
Mirmanto Mirmanto

Indonesia is an agricultural country that has many agricultural products so that post-harvest handling is necessary so that the crop is not quickly broken when stored or distributed. One harvests in Indonesia, which require post-harvest handling such as corn. Based on SNI, the maximum moisture content of corn feed raw material has a moisture content of 14%. The water content of the corn used is 20% with a tolerance of ± 0.5%. Variations air speed used is 5 m /s, 6 m /s and 7 m /s with a variation of the mass of material that is 0.5 kg, 1 kg, and 1.5 kg. With the variation of air velocity and mass of the material showed that the higher the speed of the air, the faster drying time. In addition, the heavier material is drained, it will take longer. Variations of air velocity and mass of materials that require the fastest drying time is the air speed of 7 m /s with a mass of 0.5 kg. Variations of air velocity and mass of material that takes the longest drying air is at a speed of 5 m / s with a mass of 1.5 kg of material.


Author(s):  
O.O Oniya ◽  
A.B Fashina ◽  
K.A Iyalabani ◽  
S.B Amusa

Maize is known to be an important crop for food security in developing countries; and farmers have continued to experience post-harvest losses which lead to reduction in the quality or quantity of maize grains. The main causes of post-harvest losses are the storage insect, pests, improper drying and poor storage systems. Poor storage accounts for 5-10% loss and 5% loss is attributed to insect attacks. This research modified a one tonne metallic silo with the aim of studying the effects on moisture content and hectolitre weight of the maize grains. The moisture content was determined using moisture meter while the hectolitre weight was determined using extruded brass material. The study lasted for six months and analyses were carried out on the data collected using Duncan multiple range tests at 95% level of confidence. The moisture content was observed to reduce from 13.5% to 11.4% w.b while hectoliter weight which is the main determinant of the market value of the grain was observed to increase from 276 kg/ml to 288 kg/ml, this implies that there was increase in the cost value of the grain after six month of storage. The results showed that variations in moisture content along storage period were significant at (p ≤ 0.05).


2021 ◽  
Vol 182 ◽  
pp. 106034
Author(s):  
Li-Feng Fan ◽  
Zhi-Qiang Chai ◽  
Peng-Fei Zhao ◽  
Zong-Fu Tian ◽  
Shi-Qian Wen ◽  
...  

2019 ◽  
Vol 13 (3) ◽  
Author(s):  
A. Borta ◽  
M. Zhelobkova

In recent decades, at Ukrainian farms and grain-processing enterprises, the technology of storing grain in silo bags has become widespread. In this type of storage, anaerobic conditions are created due to the physiological respiration process, which ensures extended shelf life of freshly harvested grain. This, in turn, allows the use of low-power processing equipment for post-harvest grain processing, which is especially important for wet and moist maize as it requires powerful grain dryers. The article presents the results of a study of the effect that the initial moisture content of maize grain, the temperature and the duration of its storage under anaerobic conditions have on the Falling Number, one of the quality parameters depending on the amylase activity of the grain. The object of the study was grain samples of freshly harvested (in 2017) dent maize, the hybrid DKC 3705, with the average moisture contents 14%, 21%, and 28%, stored under anaerobic conditions for 3 months at temperatures of +18°C, +11°C, and +4°C. The Falling Number was determined by the standardized Hagberg-Perten method on a ПЧП-7 instrument (“Falling Number Apparatus”). Based on the results obtained, histograms of the kinetics of Falling Number changes have been constructed, the analysis of which made it possible to establish patterns of the changes in the Falling Number depending on the moisture content of the grain and the duration of its storage at different temperatures. It has been shown that in the maize grain samples with the initial moisture content 14%, regardless of the temperature conditions during storage for 3 months, there is a steady tendency to a gradual decrease in the Falling Number. In the maize grain samples with the initial moisture content over 14%, at the beginning of storage, there is a period of an increase in the Falling Number, the intensity of which depends on the initial moisture content of the grain and the temperature conditions of its anaerobic storage. After the completion of post-harvest maturation processes in freshly harvested maize grain, its further storage leads to a decrease in the Falling Number. To summarize the experimental data, a nonlinear empirical equation is suggested to describe the patterns of changes in the Falling Number depending on the factors studied: the moisture content of maize grain, the temperature conditions and duration of storage. Considering that the value of the Falling Number is determined by the activity of the amylase complex of the grain, it can be used as an express method of monitoring the state of grain stored in silo bags.


2021 ◽  
Vol 64 (3) ◽  
pp. 1027-1037
Author(s):  
Lina M Diaz-Contreras ◽  
Rani Puthukulangara Ramachandran ◽  
Stefan Cenkowski ◽  
Jitendra Paliwal

Abstract. This study focuses on the modeling of sorption characteristics of three varieties of soybeans (Akras R2, Lono R2, and Podaga R2). Three pretreatments related to post-harvest conditions were tested on the soybean varieties: (1) freshly harvested soybeans, (2) soybeans subjected to three drying and wetting cycles, and (3) soybeans subjected to three freezing and thawing cycles. The adsorption and desorption experiments were conducted at 5°C, 10°C, 15°C, 20°C, 25°C, and 30°C using a dynamic equilibrium relative humidity (ERH) apparatus. Equilibrium moisture content (EMC) and the corresponding ERH were measured. The parameters calculated for the modified Halsey equation are applicable for storage temperatures above 10°C in the relative humidity (RH) ranges of 10% to 80% for desorption and 30% to 80% for adsorption. No significant differences were found in sorption isotherms among the soybean varieties. However, the soybean varieties responded differently to the different pretreatments (i.e., drying/wetting and freezing/thawing cycles). The adsorption isotherms of Akras and Lono soybeans showed significant differences at 10°C to 30°C when subjected to drying and wetting cycles, while Akras and Podaga soybeans showed significant differences in the same temperature range when subjected to freezing and thawing cycles. The effect of drying and wetting cycles on the desorption isotherms was found only for Akras soybeans at 10°C and 15°C below 63% and 71% RH, respectively, and for Lono soybeans at 25°C and 30°C above 69% RH for both temperatures. In general, the effect of both pretreatments on the sorption isotherms of soybeans was a reduction in EMC of up to 20%, when compared to fresh samples at selected storage temperatures. The findings of this study serve as a primary tool for developing a lookup table for safe storage guidelines for soybeans. Keywords: Equilibrium moisture content, Equilibrium relative humidity, Halsey equation, Oswin equation, Soybeans.


Author(s):  
K. K. Dhedhi ◽  
C. B. Dhobi ◽  
N. N. Chaudhari ◽  
J. S. Sorathiya ◽  
M. D. Khanpara

Present study was aimed to determine the seed quality of groundnut used for sowing by farmers of Devbhoomi Dwarka district of Gujarat. Eighty two samples of farmers saved seeds of groundnut were collected from four villages of Jam Khambhalia, six villages of Kalyanpur, one village of Dwarka and three villages of Bhanvad talukas of Devbhoomi Dwarka. The study revealed that 96.34 per cent of seed samples conformed to the prescribed seed standards for germination, moisture content, physical purity, insect infestation; while, 76.83 per cent of seed samples recorded equal or higher than 70 per cent field emergence. The results suggest that the quality of groundnut seed used for sowing by farmers was satisfactory in Devbhoomi Dwarka of Gujarat. However, farmers need to be more educated about the importance and advantages of using good quality certified seeds and shall be trained for maintenance of seed quality by adopting pre and post harvest measures so as to harvest good yields of the desired varieties.


Author(s):  
Wellytton D. Quequeto ◽  
Valdiney C. Siqueira ◽  
Vanderleia Schoeninger ◽  
Elton A. S. Martins ◽  
Eder P. Isquierdo ◽  
...  

ABSTRACT Buckwheat is a prominent crop in present-day agriculture due to its nutraceutical properties; however, information on this crop regarding the post-harvest process is scarce, as well as the characterization of its physical properties and such information is essential for the development and improvement of machinery used in post-harvest processes. Thus, the objective of this study was to determine the volumetric shrinkage, porosity, bulk density and true density of buckwheat grains throughout the drying process, as well as to fit mathematical models to the experimental values of true and bulk volumetric shrinkages. Buckwheat grains of the cultivar IPR 91 - Baili with an initial moisture content of 0.250 (decimal, dry basis.) were used. The samples used to determine the physical properties were subjected to oven drying with forced air circulation stabilized at 40 ± 1 °C. The mass of the samples was periodically weighed, so that when the product reached predetermined values of moisture content, the samples were removed and their physical properties were determined. It is concluded that the reduction in moisture content during drying causes increase in bulk density, true density and porosity. The reduction of the moisture content influences bulk volumetric shrinkage and true volumetric shrinkage of the grains, causing reductions in their values of approximately 14.47 and 14.70%, respectively, and a linear model can represent both variables satisfactorily.


Sign in / Sign up

Export Citation Format

Share Document