Vector field path following of a full-wing solar-powered Unmanned Aerial Vehicle (UAV) landing based on Dubins path: a lesson from multiple landing failures

2021 ◽  
pp. 1-30
Author(s):  
A. Guo ◽  
Z. Zhou ◽  
R. Wang ◽  
X. Zhao ◽  
X. Zhu

Abstract The full-wing solar-powered UAV has a large aspect ratio, special configuration, and excellent aerodynamic performance. This UAV converts solar energy into electrical energy for level flight and storage to improve endurance performance. The UAV only uses a differential throttle for lateral control, and the insufficient control capability during crosswind landing results in a large lateral distance bias and leads to multiple landing failures. This paper analyzes 11 landing failures and finds that a large lateral distance bias at the beginning of the approach and the coupling of base and differential throttle control is the main reason for multiple landing failures. To improve the landing performance, a heading angle-based vector field (VF) method is applied to the straight-line and orbit paths following and two novel 3D Dubins landing paths are proposed to reduce the initial lateral control bias. The results show that the straight-line path simulation exhibits similar phenomenon with the practical failure; the single helical path has the highest lateral control accuracy; the left-arc to left-arc (L-L) path avoids the saturation of the differential throttle; and both paths effectively improve the probability of successful landing.

2020 ◽  
Vol 357 (16) ◽  
pp. 11496-11517 ◽  
Author(s):  
Qiankang Hou ◽  
Li Ma ◽  
Shihong Ding ◽  
Xiaofei Yang ◽  
Xiangyong Chen

2011 ◽  
Vol 48-49 ◽  
pp. 391-396
Author(s):  
Yu Long Ma ◽  
Jian Da Han ◽  
Yu Qing He

Unmanned surface vehicle (USV) system has been one of main research directions in mobile robotics because it can be used in many situations. However, high performance path following control, especially straight line tracking control, has been one of the difficult problems in autonomous control of USV system. In this paper, we propose a new straight line path following control algorithm by combining yaw angle feedback and back-stepping technique and show its closed loop stability. The most absorbing advantage of the proposed controller is that it not only reserve the good performance of back-stepping controller but also bring much faster convergent rate, which is very important in real applications. The simulation results with respect to a training ship model have shown the feasibility and validity of the proposed method.


2011 ◽  
Vol 19 (3) ◽  
pp. 493-506 ◽  
Author(s):  
E Børhaug ◽  
A Pavlov ◽  
E Panteley ◽  
K Y Pettersen

Author(s):  
Taotao Liang ◽  
Qiaozhi Yin ◽  
Xiaohui Wei

The paper deals with straight-line path-following control design for the aircraft equipped with skid landing gears. First, a simple yet accurate on-ground aircraft model is established, which takes into account the effects of the aerodynamic and ground forces. To improve the directional stability of the aircraft during the roll-out phase, a novel skid with variable friction coefficients is proposed. Second, the path-following problem is converted to the attitude control problem by constructing a guiding vector field that generates the commanded course, and then an improved error function is proposed to manage the trade-off between the convergence rate and the strong lateral maneuvers. To achieve a good performance in path following, the incremental nonlinear control allocation is applied to make full use of three available actuators (nose wheel, variable friction skid, and rudder). The expected path here is the runway centerline so as to avoid runway excursions. Finally, the effectiveness and robustness of the path-following control are validated on different initial conditions. Results show that the proposed skid structure and control scheme are propitious to enhancing the resistance to crosswind. Moreover, the maximum lateral displacement during the path-following process decreases, especially in the low-speed region.


Sign in / Sign up

Export Citation Format

Share Document